So i am sanding my spoiler i bought for my celica, it was painted a darker blue than my car so i am going to sand it all and paint it to match my car. SO....
How far down do i need to take it when i am sanding it? All the way down or just enough to wear it is almost to the primer?
thanks for the help
1 JL 1,000/1v22 JL 12" W6v22 Focal 6.5 component 165a1Kenwood DDX512 head unitRunning 142.6db with the back seat up:)
If the paint that's on there is in reasonable/good condition, all you will need to do is key the paint with a scotchbrite pad or similar, prime & spray.
If the paints not good, sand using 800-1000 grit paper until you get a smooth enough surface, then prime & spray.
RegardsfrispHKS Super Power Flow Induction Kit, HKS Silent Hi Power Exhaust, Fensport Decat, SS-III SpolierProjector Lights, LED JDM Tails, GT4 Nose, Tein Super Street coilover kit, 17" Aerospeed RSGT's, White dash LED'sJDM Wind Deflectors, TRD Quick Shift, Stainless Sill Covers. Gen 7 leather, 3VZ-FE 3ltr V6To be done....Ganador mirrors, 2 Pot BrakesStainless brake lines, Decent Disks/pads
>
QUOTE (frisp @ Jun 28, 2008 - 8:23 PM)
>If the paint that's on there is in reasonable/good condition, all you will need to do is key the paint with a scotchbrite pad or similar, prime & spray.
If the paints not good, sand using 800-1000 grit paper until you get a smooth enough surface, then prime & spray.
Opps
ya the paint
was fine... i went after it with 60 to take all the gloss and everything off to get it as bare as possible
oh well, just more paint time for me i guess... and i could only find grit up to like 440... guess i need to go shopping again:(
1 JL 1,000/1v22 JL 12" W6v22 Focal 6.5 component 165a1Kenwood DDX512 head unitRunning 142.6db with the back seat up:)
........yea your gonna ATLEAST want to get it decently smooth with the 400, preferably 800 final.....
as long as you sand down to the base coat it should work out for you...
>
QUOTE (Jdog1385 @ Jun 29, 2008 - 9:52 AM)
>>
QUOTE (95celgt @ Jun 29, 2008 - 2:34 AM)
>........yea your gonna ATLEAST want to get it decently smooth with the 400, preferably 800 final.....
as long as you sand down to the base coat it should work out for you...
get 800 and go for it...the better the sand, the better the product. use the 400 and 800 to take out the imperfections
Thanks for the help, too bad i wont be able to paint it for like two weeks:( I am going away on vacaction!!!:)
I have the three post spoile for a coupe... but, i am removing the middle post, making a plate to cover it up, then i will have a 2 post 3 post spoiler:) hahahah
1 JL 1,000/1v22 JL 12" W6v22 Focal 6.5 component 165a1Kenwood DDX512 head unitRunning 142.6db with the back seat up:)
