Over 1M Posts • 84K Topics • 9K Authors

Need alignment after installing springs? - 6G Celicas Forums

Topic #61545 15 posts Started by reko
I wanna install my TRD lowering springs this weekend on my new KYB GR-2 thing is I have already installed the shocks...

Will i need to do an alignment after reinstalling the shocks?
i would recommend it, yes. The lower springs will change all the angles. Camber will most likely be out too.

-LukeMy Flickr
YES! Although if doing larger wheels/tires at the same time, it may not be too out of whack. The largest effect is going to be seen in the Toe-In (ask how I know). Camber will be affected, but depending on wheels/tires it may or may not be extreme. Case in point: Tein S-Techs and 18x8 wheels w/225/40 tires was a perfect -1.7* on each side after settling, but it DESTROYED the stock 15" wheel/tire combo on the inside tread up front in a matter of a few weeks.
>
QUOTE (Fastbird @ Aug 27, 2008 - 1:54 PM) *
>The largest effect is going to be seen in the Toe-In (ask how I know).


How do you know?

(\__/)(='.'=) This is bunny. Copy and paste bunny into your(")_(") signature to help him gain world domination.
>
QUOTE
>Will i need to do an alignment

yes but dont do it striaght away, have to let them settle in first 3-4 weeks? also the rear usually sits higher, so I'd put some dead weight in the boot like water bottles (about 3-4 20L)

ST202 SS-II CELICA threadNew Zealand members check inSticky thread's: How to contribute and troubleshoot.
well i just did my alignment and they couldnt fix alot. they did fix toe in and caster. i just got the eibach alignment kit and i fixed it myself and now i have roughly .6 degree alignment.

I don't normally drive fast, but when I do its on a curvy section of this island
>
QUOTE (Taskbot @ Aug 27, 2008 - 2:26 PM) *
>>
QUOTE (Fastbird @ Aug 27, 2008 - 1:54 PM) *
>The largest effect is going to be seen in the Toe-In (ask how I know).


How do you know?


biggrin.gif Experience. wink.gif
yes you do...

No more replicas... This is evolution... This isSS-four:)________[Featured Celica of 6gc.net @ 2010]_________
>
QUOTE (Taskbot @ Aug 27, 2008 - 9:26 AM) *
>>
QUOTE (Fastbird @ Aug 27, 2008 - 1:54 PM) *
>The largest effect is going to be seen in the Toe-In (ask how I know).


How do you know?


HAHA i can scan my alignment sheet if you want tongue.gif to show how off my car was for 4 months and is still off.......camber only though tongue.gif

I don't normally drive fast, but when I do its on a curvy section of this island
all right i needed one anyway... ever since i install my new steering, its always half a turn on the left
>
QUOTE (808celica @ Aug 28, 2008 - 4:39 AM) *
>>
QUOTE (Taskbot @ Aug 27, 2008 - 9:26 AM) *
>>
QUOTE (Fastbird @ Aug 27, 2008 - 1:54 PM) *
>The largest effect is going to be seen in the Toe-In (ask how I know).


How do you know?


HAHA i can scan my alignment sheet if you want tongue.gif to show how off my car was for 4 months and is still off.......camber only though tongue.gif



Hmm it was kind of a joke (because he asked to ask him) but now you've got me intrigued. Poast pics.

(\__/)(='.'=) This is bunny. Copy and paste bunny into your(")_(") signature to help him gain world domination.
HAHAHa guess what i tried to scan it............
and my scanner bulb broke.............

EPIC FAIL!!!

**edit** here you go. yeah they listed my car as 96-99 kindasad.gif

before with springs on


after without alignment kit


This post has been edited by 808celica: Aug 29, 2008 - 4:43 PM

I don't normally drive fast, but when I do its on a curvy section of this island
have you got one with the alignment done?

ST202 SS-II CELICA threadNew Zealand members check inSticky thread's: How to contribute and troubleshoot.
>
QUOTE (Rusty @ Aug 29, 2008 - 1:34 PM) *
>have you got one with the alignment done?


top pic is the before alignment job scan and the bottom is the after the alignment job print out.

however i did get the eibach alignment kit and installed myself and fixed the rears good and the fronts also. im going to have them recheck it and fix anything neccessary if needed and ask for another print out to update my recon sheet kindasad.gif

I don't normally drive fast, but when I do its on a curvy section of this island
You need to buy a Camber Kit first. Otherwise doing a wheel alignment is useless.