Over 1M Posts • 84K Topics • 9K Authors

Home > Topic #61596

FS: (2 sets) RS*R & TEIN S-Tech Lowering Springs - 6G Celicas Forums

Topic #61596 6 posts Started by azian_advanced
azian_advanced
#1
Here are some specs from this thread:

>
QUOTE
>Stock Spring Rate // Front: 2.9kg/mm Rear: 2.3kg/mm

ST205 RSR Spring Rate // Front: 4.0kg/mm Rear: 3.4kg/mm
Estimated Front Drop: 1.77 in Rear Drop: 1.32 in

TEIN S-Tech Spring Rate // Front: 3.9kg/mm Rear: 2.2kg/mm
Estimated Front Drop: 1.4 in Rear Drop: 0.9 in







>>1. RSR Ti2000 Springs>> >>>>(SOLD!)>>>>

These RSR springs came off an ST205 but works on any celica (ST/GT/GT-S). I bought them last fall and have been using them since. I was quite happy with these springs until i blew my stock struts and upgraded to a full coilover system. They are in good condition.
Asking $175 USD shipped obo









>>2. TEIN S-Tech Springs>> (Only 3 springs, missing one rear) >>>>(Available)>>>>

I bought these a couple of years ago until i bought RSR springs. They are still in good condition. These are great if you only want to get rid of the enormous gap at the front, but keep the rear as they are.
Bonus: Free TEIN dampachi doll! biggrin.gif ($30 value)
Asking $90 USD shipped obo




This post has been edited by azian_advanced: Aug 30, 2008 - 8:32 PM
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Taskbot
#2
I'm kind of interested in the Tien set. I'll let you know if I can afford it.
(\__/)(='.'=) This is bunny. Copy and paste bunny into your(")_(") signature to help him gain world domination.
azian_advanced
#3
pending payment for RSR springs
----------------------------------------------------------------------------------------------------------------------------------------------------------------
azian_advanced
#4
RSR springs sold..

TEIN springs still available
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Badkarma
#5
how are you missing one spring??

J/W.

Erich
azian_advanced
#6
i bought it that way from Clipsetuner... he had lost one of the springs. my intention was just to lower the fronts and that was fine with me. i was quite satisfied with the height of the rears, i just hated how the stock front was soo high. then i wanted something stiffer so i switched the teins to rsr. then i blew my (2 sets) of shocks, so then i realized it was time to go one step higher.
----------------------------------------------------------------------------------------------------------------------------------------------------------------
← Back to Topics