Hi guys,

I just bought a JDM projector bulbs, and its from a half-cut shop.
the thing is all the JDM projector lights mounting brackets are broken, will take PIX soon and upload them. I have the normal ST202 lights
my question is, will i be able to mount the inner reflector and the clear lens on my older ones housing, or is it better to DIY custom brackets for it (scared that it will be kindda shaky during bumps and high speeds)?

THX

This post has been edited by zeus83: Jan 20, 2009 - 5:24 AM

custom brackets, just seal everything up at the end so that they dont humidify

exactly, this is what i did. btw, forgot to mention that the left high beam is completely smashed except for the outer reflector. i was thinking of getting my old lens paper sanded, polished and put back along with the newer reflector.

any safe method of removing the high beam lens, and getting paper sanded and polished?

the unexpected, the lights started to humidify , the thing is i cant find any crack on the housing or lens. can this be caused if the engine is washed.
and how to remove the inner humidity? scared that it will spoil the HID H1 bulbs im installing

the final outcome



Thx Rayme for the lenses...

looks good!

your license plate there kicks ass. like it.

what you end up doing.

THX. guys

trdproven,

Well intact i like the US based plate. Correct me if im wrong, since u car write whatever u want, i.e. ur name

njccmd2002,

I ended up doing the following:

1.Doing my highbeam lenses
2.Paint job