Hi bros n sistaz!

Is it possible for you to post the data of your set up of the avcr ? Ive bought one n just installed it. Trying to learn
how to set it up and i need to know how to tune it for the best power.

I need to know everything on it so that i can tune mine n help other friends to tune theirs correctly. Am studying the
thing on the net but i need more precise infos. Got infos about supras set up but very little about celicas.

There are some items like, Boost/Duty, NE points,F/B Speed, Start Duty etc mode etc....
Would be great if some of you could post their setups here so that we can compare and get the best
of boost for our beast!

Cheerz

Apex-i AVC-R settings for 0.9 Bar and 1.1 bar

BASIC SETTINGS

Setting [A] 0.9 Bar

Boost /Duty Cycle
Bst = 0.90kg/cm2
Duty = 52%

NE Point
NE1 = 3000
NE2 = 3500
NE3 = 4000
NE4 = 4500
NE5 = 5000
NE6 = 5500
NE7 = 6000
NE8 = 6500

F/B Speed
1S = 5
2N = 5
3R = 5
4T = 5
5T = 5

Learn Gear
1S = x
2N = x
3R = x
4T = x
5T = x

Start Duty
1st = 5%
2nd = 1%







Setting [B] 1.1 Bar

Boost /Duty Cycle
Bst = 1.10kg/cm2
Duty = 60%

NE Point
NE1 = 3000
NE2 = 3500
NE3 = 4000
NE4 = 4500
NE5 = 5000
NE6 = 5500
NE7 = 6000
NE8 = 6500

F/B Speed
1S = 5
2N = 5
3R = 5
4T = 5
5T = 5

Learn Gear
1S = x
2N = x
3R = x
4T = x
5T = x

Start Duty
1st = 6%
2nd = 2%










Etc settings

Car Select
Cyl = 4
Spd = 5
Throttle = / (arrow pointing up to the right)

Sensor Select
Number one (1)

Gear Jdge
1st = 120
2nd = 075
3rd = 050
4th = 035
5th = 025
N/S = 255

Graph Scale
BS = 2.0kg/cm2
Ne = 8000 RPM
Sp = 300km/h

Monitor
2 Channel

1 Bst
2 Rev

You can set the Monitor to whatever you want and display any information you choose from 1 to 4 different types of information

Now you are ready to go for a blast….enjoy, but keep an eye on the boost levels using the peak hold facility. If the boost levels get too high then knock the duty cycle down 1 0r 2%, if its not reaching the desired boost then increase it about 1 or 2% at a time until the correct level of boost is reached.

Once you get used to those settings you can start to play around with the learn gear facility and the start duty a little more to get the best from the AVCR.

[thnx mate but ive seen this one. its very basic. Tried it but i feel like plenty of things are missing. For examlple the gear judge of 1st 120 2nd 75 etc... need to b set up.
In this prog he asks us to let it as normal , whereas ive learnt that we need to drive to tune this one. Can i get another setup ? I drove my car n did it gave me la 1st 103 - 2nd 73 sth...

Well those settings were set up on a rolling road for me by a tuning company and work pretty well, but take it or leave it.

>

To tell u frankly i started with exactly the same thing which i think was posted by urself on another topic. But it did greatly help me.
But still some fine tune to do on it.

Well reading up you have to set the gear judge on the move anyway as its different for each and every car.....those figures are obviously what my car came up with....as you say yours will be different....wouldnt call it basic....just not right for you, I had a play with the learn gear settings a few years ago and it did all kinds of wierd things so I turned it off and havnt bothered with them since...everything else is spot on for my use.

>


ah ok...hope u not "upset" bro am just looking to get the best "setup" hehe

Me upset...naaaaa...never....well almost never...you`ll know it if I am. but its never worth getting upset on a forum.

>

gr8 then bro
keep up the good work:)