will a pressure plate from a 3sgte mr2 work on a 3sgte swap?
Celica Or Die, check outhttp://www.redlinemotive.com!
Celica Or Die, check outhttp://www.redlinemotive.com!
mr2 pressure plate in celica? - 6G Celicas Forums
Celica Or Die, check outhttp://www.redlinemotive.com!
>
yes.
QUOTE (silverceli09 @ Nov 24, 2008 - 9:14 AM) 
>will a pressure plate from a 3sgte mr2 work on a 3sgte swap?
yes.
Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered
>
ok sweet. now, since i have a 5sfe, i should already have the 5s disk. so all i really need is the 3sgte pressure plate. do i have to have a custom plate made, or will a normal 3sgte pressure plate work?
QUOTE (presure2 @ Nov 24, 2008 - 10:21 AM)
>>
yes.
QUOTE (silverceli09 @ Nov 24, 2008 - 9:14 AM)
>will a pressure plate from a 3sgte mr2 work on a 3sgte swap?
yes.
ok sweet. now, since i have a 5sfe, i should already have the 5s disk. so all i really need is the 3sgte pressure plate. do i have to have a custom plate made, or will a normal 3sgte pressure plate work?
Celica Or Die, check outhttp://www.redlinemotive.com!
normal one will work, all though I do not recommend you using your old 5s disc, because it won't be able to hold the power the 3s has. Your clutch will be slipping sooner or later.
98 Celica gt red- totaled deer94 Celica st black DD (bad weather beater)- totaled deer95 Celica gt silver- chassis sold88 Celica All-Trac (Burned to a crisp)94 Celica gt white (sold)In need of a rust free chassis!!!!
>
i think you may have parts confused.
go to howstuffworks.com and research a bit, its a great way to learn how all that stuff works.
you need a 3sgte pressure plate, 3sgte clutch disk, with 5sfe (s54) splines, and the 3sgte flywheel.(resurfaced of course) you will also want a new throwout bearing also, as tweek discribed in your other thread.
QUOTE (silverceli09 @ Nov 24, 2008 - 10:29 AM)
>>
ok sweet. now, since i have a 5sfe, i should already have the 5s disk. so all i really need is the 3sgte pressure plate. do i have to have a custom plate made, or will a normal 3sgte pressure plate work?
QUOTE (presure2 @ Nov 24, 2008 - 10:21 AM)
>>
yes.
QUOTE (silverceli09 @ Nov 24, 2008 - 9:14 AM)
>will a pressure plate from a 3sgte mr2 work on a 3sgte swap?
yes.
ok sweet. now, since i have a 5sfe, i should already have the 5s disk. so all i really need is the 3sgte pressure plate. do i have to have a custom plate made, or will a normal 3sgte pressure plate work?
i think you may have parts confused.
go to howstuffworks.com and research a bit, its a great way to learn how all that stuff works.
you need a 3sgte pressure plate, 3sgte clutch disk, with 5sfe (s54) splines, and the 3sgte flywheel.(resurfaced of course) you will also want a new throwout bearing also, as tweek discribed in your other thread.
Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered