So im finally waiting for my tein ss coilovers to arrive along wiht my sus tech front and rear sway bars, anyone out there what particular drop are you running in the front and the rear, i know the front gives a 2.4 drop and the rear is a 1.4 or something like that, i went to the tein website and they say not to go lower than there standard settings. Will you mess up the coilover if you go lower than there standards.
Tein SS Coilovers - 6G Celicas Forums
till you hit the ground!
check purplegt's profile where his car on SS is, is great, it rides nice and handles well. PM him and ask where his specific settings are
This post has been edited by playr158: Nov 25, 2008 - 1:46 PM
check purplegt's profile where his car on SS is, is great, it rides nice and handles well. PM him and ask where his specific settings are
This post has been edited by playr158: Nov 25, 2008 - 1:46 PM
Your not going to want to go any lower than what they have available. If your buying the Teins then you are probably concerned about performance above all and you don't bottom out a car if your going for performance.
I loved them, they were one of the best things I got for the car.
This post has been edited by Supersprynt: Nov 25, 2008 - 2:01 PM
I loved them, they were one of the best things I got for the car.
This post has been edited by Supersprynt: Nov 25, 2008 - 2:01 PM
MyFlickrMyeBay_Perpetual Aperture_
leave the settings as they are until you research and design your own custom setup.
you know why they put sheep at the edge of a cliff.... that way they push back!(2:27:32 AM) edit: please f*cking work, f*ck, sh*t, piss(2:28:08 AM) edit: that did the trick
Thanxx for the feedback, not really going for performance right now, its just my daily driver and i wanted a stiff setup for my car, in a couple of months i hope to be track ready.