Hi Guys,

Was experiencing some difficulty closing my driver side window, it sound like some thing got broken inside, so what i did is open the door panel, then accessing the window mechanism, i got a piece of wood to hold the glass, then started disassembling the motor unit from the door shell, to my surprise the system was much more complicated than i thought, it had some metal wire which ran like a belt (from motor to window), i presume the motor is fine, but the white plastic pieces extending from the motor in a shape of "V" is broken, where can i get this replaced?

looked something like this



Help Appreciated....

I had this problem too..

was it the regulator that holds up your window?
mine got a whole lot of metal wiring tangled up and I had to replace it..

replace, go to a junkyard and get it.

sorry, I didnt get to see the picture because internet at my work is messed up..

your gonna have to replace the whole regulator..

if you want good quality, find your nearest dealership with a parts dept. and it'll cost ya like $90
bucks I think..

but if baller on a budget,njccmd2002 said, junkyard status once you get the time to

are our window regulators the same as the 5th gens? if so it opens up my junkyard search to replace mine greatly. i had the cable come unraveled in mine too.

Should be about $90 from the dealer, but be careful when attaching the new regulator to the motor as you can unravel it.

dealer quoted me $121. ouch.....

can a manual regulator be used with a power motor??? anyone ponder this but me?