ok my block has 1-2-2-2-2 on it, the crank is 1-1-2-1-0 that tells me that i need 2-3-4-3-2 for main bearings according to the BGB. HOWEVER, when i took the main caps off, i did not have those bearings, i had 1-2-2-3-2 has anyone else run into this issue?

what do i do, i ordered what the BGB says, should i just use those, plastigauge them and hope for the best, or order what was in there originally

are you taking your block apart?

yes block is all apart. im going to use the bearings according to the numbers and then plastigauge them. just go from there

>


Hey Smaay, those will be the correct # you came up with, I check my Toyota service manual and came up with the same #'s as you did 2-3-4-3-2