I have recently been having problems with my ECU-IG fuse poping and need some help. I have a 99 celica with the 4th gen 3sgte swap that i completed last year. The car keeps blowing the fuse in the fuse panel inside the car. I don't even really know what the fuse does or how to go about troubleshooting the problem. If anyone has any insight please help! Thanks
FUSE HELP! - 6G Celicas Forums
Is it the AM2 Fuse? 30amp fuse IIRC.
98 Celica gt red- totaled deer94 Celica st black DD (bad weather beater)- totaled deer95 Celica gt silver- chassis sold88 Celica All-Trac (Burned to a crisp)94 Celica gt white (sold)In need of a rust free chassis!!!!
>
no it's the 15 amp fuse furthest t to the left in the row with only 2 fuses, the panel said "ECU-IG"
QUOTE (bccentaur3 @ Mar 5, 2009 - 10:00 PM) 
>Is it the AM2 Fuse? 30amp fuse IIRC.
no it's the 15 amp fuse furthest t to the left in the row with only 2 fuses, the panel said "ECU-IG"
ahhh the efi fuse I would assume. You don't have any wires cut that are touching eachother? Is the fuse blowing when you try to start the car?
98 Celica gt red- totaled deer94 Celica st black DD (bad weather beater)- totaled deer95 Celica gt silver- chassis sold88 Celica All-Trac (Burned to a crisp)94 Celica gt white (sold)In need of a rust free chassis!!!!
>
yes the fuse blows as soon as you go to the on position, but no cut wires are under there, i pulled apart all my interior plastics looking for something out of place and no wires were messed up. the most recent work i had done was a viper alarm system installed about 4 months ago by 6th avenue electronics. and i checked all the work and wires the guy spliced into and it all seemed fine.
QUOTE (bccentaur3 @ Mar 5, 2009 - 10:38 PM)
>ahhh the efi fuse I would assume. You don't have any wires cut that are touching eachother? Is the fuse blowing when you try to start the car?
yes the fuse blows as soon as you go to the on position, but no cut wires are under there, i pulled apart all my interior plastics looking for something out of place and no wires were messed up. the most recent work i had done was a viper alarm system installed about 4 months ago by 6th avenue electronics. and i checked all the work and wires the guy spliced into and it all seemed fine.
Who did your wiring harness? How long have you had your swap?
98 Celica gt red- totaled deer94 Celica st black DD (bad weather beater)- totaled deer95 Celica gt silver- chassis sold88 Celica All-Trac (Burned to a crisp)94 Celica gt white (sold)In need of a rust free chassis!!!!
>
Dr. Tweak at Pheonix Tuning in Savanah, GA. He specializes in them and i havn't had any problems with it. I finished the swap just over a year ago, i got the car running and back on the road Jan. 2008. It's my daily driver and I did all the work myself.
QUOTE (bccentaur3 @ Mar 5, 2009 - 9:48 PM)
>Who did your wiring harness? How long have you had your swap?
Dr. Tweak at Pheonix Tuning in Savanah, GA. He specializes in them and i havn't had any problems with it. I finished the swap just over a year ago, i got the car running and back on the road Jan. 2008. It's my daily driver and I did all the work myself.
Well if Doc did it, theres no issues with his conversion. Did this just happen recently?
WOW!!! I just read that the fuse inside the car is popping not the one in the engine bay. Do you have a turbo timer?
WOW!!! I just read that the fuse inside the car is popping not the one in the engine bay. Do you have a turbo timer?
98 Celica gt red- totaled deer94 Celica st black DD (bad weather beater)- totaled deer95 Celica gt silver- chassis sold88 Celica All-Trac (Burned to a crisp)94 Celica gt white (sold)In need of a rust free chassis!!!!
>
yea it's the one inside the car. i had a turbo timer but i took it out.
QUOTE (bccentaur3 @ Mar 5, 2009 - 9:57 PM)
>Well if Doc did it, theres no issues with his conversion. Did this just happen recently?
WOW!!! I just read that the fuse inside the car is popping not the one in the engine bay. Do you have a turbo timer?
WOW!!! I just read that the fuse inside the car is popping not the one in the engine bay. Do you have a turbo timer?
yea it's the one inside the car. i had a turbo timer but i took it out.
was it hard wired into the ignition wires? Or was it plugged in with a harness?
98 Celica gt red- totaled deer94 Celica st black DD (bad weather beater)- totaled deer95 Celica gt silver- chassis sold88 Celica All-Trac (Burned to a crisp)94 Celica gt white (sold)In need of a rust free chassis!!!!
>
it was hard wired in.
QUOTE (bccentaur3 @ Mar 5, 2009 - 11:56 PM)
>was it hard wired into the ignition wires? Or was it plugged in with a harness?
it was hard wired in.
check the wires in there to see if there is any of it exposed and touching one another. Maybe some of the electrical tape got loose.
98 Celica gt red- totaled deer94 Celica st black DD (bad weather beater)- totaled deer95 Celica gt silver- chassis sold88 Celica All-Trac (Burned to a crisp)94 Celica gt white (sold)In need of a rust free chassis!!!!
>
ok ill deff check again. it's been really cold out so i havn't been working out there too much. thanks do you by any chance know what that fuse protects?
QUOTE (bccentaur3 @ Mar 6, 2009 - 12:01 AM)
>check the wires in there to see if there is any of it exposed and touching one another. Maybe some of the electrical tape got loose.
ok ill deff check again. it's been really cold out so i havn't been working out there too much. thanks do you by any chance know what that fuse protects?
Sorry I don't. I would assume to keep the ecu from popping. I really don't know.
98 Celica gt red- totaled deer94 Celica st black DD (bad weather beater)- totaled deer95 Celica gt silver- chassis sold88 Celica All-Trac (Burned to a crisp)94 Celica gt white (sold)In need of a rust free chassis!!!!
i'll have a look at the diagrams and ill reply what it protects and where i think there may be problems
QUOTE"And, as always, your friendship, help, and dedication to the advancement of Texas Celica dominance is GREATLY appreciated. Thanks bro." -DEATH1994 GT:V6 swap, 5speed E53 W/ LSD, All Power, now RED1995 ST:SOLD @273k miles, Auto, all power, CarPC, White1994 ST:Totaled, 5spd, all power, RedRIP 07/09/09 @ 241,8101994 Lexus LS400:This is my new DD
>
Ok, Thank you
QUOTE (stephen_lee @ Mar 6, 2009 - 12:40 AM)
>i'll have a look at the diagrams and ill reply what it protects and where i think there may be problems
Ok, Thank you
power flows:
battery>main fusable link>100A alt>40A AM1>IGN switch>15A ECU-IG
Circuits Protected:
A/C pressure switch
ABS ECU(antilock brakes)
Cruise Control ECU
Shift Lock ECU(auto only)
Water Temp Switch (for engine fans)
Engine Main Relay(coil side)
Fan Relays 1 & 2 (coil sides)
Odd thing is, the engine control unit really doesnt get power from this fuse* lol
I'll reply again in a bit after i look for probable issues
*edit, put switch by accident
This post has been edited by stephen_lee: Mar 5, 2009 - 11:56 PM
battery>main fusable link>100A alt>40A AM1>IGN switch>15A ECU-IG
Circuits Protected:
A/C pressure switch
ABS ECU(antilock brakes)
Cruise Control ECU
Shift Lock ECU(auto only)
Water Temp Switch (for engine fans)
Engine Main Relay(coil side)
Fan Relays 1 & 2 (coil sides)
Odd thing is, the engine control unit really doesnt get power from this fuse* lol
I'll reply again in a bit after i look for probable issues
*edit, put switch by accident
This post has been edited by stephen_lee: Mar 5, 2009 - 11:56 PM
QUOTE"And, as always, your friendship, help, and dedication to the advancement of Texas Celica dominance is GREATLY appreciated. Thanks bro." -DEATH1994 GT:V6 swap, 5speed E53 W/ LSD, All Power, now RED1995 ST:SOLD @273k miles, Auto, all power, CarPC, White1994 ST:Totaled, 5spd, all power, RedRIP 07/09/09 @ 241,8101994 Lexus LS400:This is my new DD
>
wow who would have thought!! thanks so much i appreciate it, the thing was driving me crazy
QUOTE (stephen_lee @ Mar 6, 2009 - 12:55 AM)
>power flows:
battery>main fusable link>100A alt>40A AM1>IGN switch>15A ECU-IG
Circuits Protected:
A/C pressure switch
ABS ECU(antilock brakes)
Cruise Control ECU
Shift Lock ECU(auto only)
Water Temp Switch (for engine fans)
Engine Main Relay(coil side)
Fan Relays 1 & 2 (coil sides)
Odd thing is, the engine control unit really doesnt get power from this fuse* lol
I'll reply again in a bit after i look for probable issues
*edit, put switch by accident
battery>main fusable link>100A alt>40A AM1>IGN switch>15A ECU-IG
Circuits Protected:
A/C pressure switch
ABS ECU(antilock brakes)
Cruise Control ECU
Shift Lock ECU(auto only)
Water Temp Switch (for engine fans)
Engine Main Relay(coil side)
Fan Relays 1 & 2 (coil sides)
Odd thing is, the engine control unit really doesnt get power from this fuse* lol
I'll reply again in a bit after i look for probable issues
*edit, put switch by accident
wow who would have thought!! thanks so much i appreciate it, the thing was driving me crazy
I'd really check those wires the turbo timer was wired into. though i don't think thats where the problem is since its 'upstream' of the fuse (it'd be blowing AM1)
QUOTE"And, as always, your friendship, help, and dedication to the advancement of Texas Celica dominance is GREATLY appreciated. Thanks bro." -DEATH1994 GT:V6 swap, 5speed E53 W/ LSD, All Power, now RED1995 ST:SOLD @273k miles, Auto, all power, CarPC, White1994 ST:Totaled, 5spd, all power, RedRIP 07/09/09 @ 241,8101994 Lexus LS400:This is my new DD