I am looking for just a single guage pillar pod. Will a Supra or Mr2 , or any other car work?
pillar pod - 6G Celicas Forums
you can get a universal single pod from greddy.
I have that one, and it basicly fits perfect.
Go Here.
I have that one, and it basicly fits perfect.
Go Here.
Also, many people have said that the Autometer pod for a MKIV Supra fits fine. Mine didn't fit perfectly, and I tried to mold it to the a-pillar perfectly with a heat gun, and ended up screwing up one of the pods, so I cut it in half, and now I've got a single gauge pod that fits nicely. >
>
>
New Toyota project coming soon...
Took me bout 2 hrs to get a single universal to fit decently, i still dont like the fit.
MyFlickrMyeBay_Perpetual Aperture_
somebody said a 3rd gen RX7 pod worked...
-FallenHero+Oct 14, 2003 - 7:25 PM
New Toyota project coming soon...
my MKiv pod fit quite well. i will get some pics of it later. >>.
>.
AIM==Mynzeyes
wass up guys
i found a web sight that has group buys for gauge pods. if we buy min of 30 pods at about 40.00 each, they can make a perfect gauge pod for the 6th gen celicas even a full A piller gauge pod too!!! >
> ckeck it out at www.gaugepods.com
how about it guys?? i would do the group buy to get a oem pog for my car >>
i found a web sight that has group buys for gauge pods. if we buy min of 30 pods at about 40.00 each, they can make a perfect gauge pod for the 6th gen celicas even a full A piller gauge pod too!!! >
> ckeck it out at www.gaugepods.com how about it guys?? i would do the group buy to get a oem pog for my car >
>
Hunter, there's already a group buy going on with that company. I haven't checked the thread lately, but I think Lotek is in the process of building a full triple-gauge a-pillar pod for us. >>
>
New Toyota project coming soon...
oh really i didn't know, how can i get in on it ???
I got a dual one from APC. It fits alright, it's a little foamy thing to take up the tiny gap. It's a good fit though.
95 Toyota Celica GTDead for now --> Soon to have a 3S-GTE02 WRX --> This is for speed- Borla Exhaust- TurboXS BOV- Custom CAI02 Civic EX- MB Quart Reference 5.25" Components- Rockford MTX 8" Subs in the doors- Alpine Type S Rear Fills- 2x Alpine SWR-1042D Subs in a custom fiberglass box- Alpine F345 Amp for the front doors- Alpine M605 on each Type R- Phoenix Gold wiring- Alpine CDA-9855 Head Unit- Alpine Amp link- 2x Rockford Fosgate 1 Farad Caps- The best Viper 791 alarm install ever
My MKIv fit nicely, but there's a lttle gap in between..nothing major...I'm REALLY picky about little details and it didn't bother me >>
Here's how it looks!
>Here's how it looks!
Past -7A-FTE: Will never forget youPresent -3rd Gen3S-GTE: Swap in progressQUOTE (SinisterSinner @ Dec 19, 2009 - 10:52 AM)I dont want to even think of turbos, they blow up way too often...
I used one for a 93-98 supra <--- for those that dont know MK this and that.
Newayz if fit pretty good.. I did trim a little of it off on the side facing the driver window to make it a little more flush, fits pretty decent but would like to just get a triple apillar for it eventually... might check out the lotek thing.
Newayz if fit pretty good.. I did trim a little of it off on the side facing the driver window to make it a little more flush, fits pretty decent but would like to just get a triple apillar for it eventually... might check out the lotek thing.
99 project version 3.0.. hello SEMA 2010 =)
nice job OOBE!!!!
looks really nice
looks really nice
-Matthew+Oct 18, 2003 - 12:50 PM
Past -7A-FTE: Will never forget youPresent -3rd Gen3S-GTE: Swap in progressQUOTE (SinisterSinner @ Dec 19, 2009 - 10:52 AM)I dont want to even think of turbos, they blow up way too often...
Found the solution to my problem. Went to JCWhitney and bought a universal pod. The fit was o.k. took only five minutes of using a heat gun to fit it properly. >
> Thanks to everyone for their input.
> Thanks to everyone for their input.
That is the best way to go.....the universal dual pod from jc fits almost perfectly but needs to be cut/trimmed a lettle on each side. I made a few of these for a few guys. Komlofske is a member here and he has one installed that i made if you want to ask him about fitment. Deffinetly for the price you can not beat it and it only takes a little time and patience to get it to fit perfectly!
JC Whitney is the spot for gauge pods!
I got pics if you guys want to see the fitment but i dont know how to put them on here so you will either have to explain it to me or just ask me to send you pics by email .
dg
JC Whitney is the spot for gauge pods!
I got pics if you guys want to see the fitment but i dont know how to put them on here so you will either have to explain it to me or just ask me to send you pics by email .
dg
i bought a dual pod for a 94-99 integra and it fit well. i put in 5 screws and it looks good.