I bought some 96-99 fog lights without the wires cause thats how they were.

i first called up my local dealership and he ordered up a set of the wires i'd need. So i bought the fog lights, but when i went to get the wires what he had ordered was from the back of the fog light to the car, when i saw this i started talking to him and he said the only way for me to get those wires was to buy a full wiring harness. And local junk yards don't seem to have any 6gens in them so i am hoping that someone here who maybe did a bumper conversion can cut off thier fog light wires that they aren't using... ?

thanks

My parts car has all the wires, but the lights and bumper all all gone. If You'll help Me figure out exactly what You need I'll take them off for You.

i think i may have them, and i won't be using them since i have rally lights which are mo betta. i'll double check tonight and get back to you. how much of the cable do you need past the connectors?

PM'd 96qtok...

Splice them into your parking lights if you don't mind them coming on when you turn on your parking lights. You can also get a fog wiring kit from NAPA, IIRC it's about $22 w/wiring and relay.

>

Like cut off the female end of the connector and splice them in from there? 96qtok is cutting off his wires and sending them to me

" I think these are the ones, but the wires are white/red and white/black. "

those are the pics 96qtok sent me... those are the right ones right?