It looks so freaking sweet!

I found those on azian advance album... he sent me a link that teaches how to do it but i dont understand how... i mean there's some pictures but none shows exaclty what to remove / cut to put the led's inside the tails...

If anyone knows how, lemme know!

hi reko. you'll need to cut the bottom part of the black rear housing of the tail lights to put the LEDs inside. use a really thin type of saw blade, either reciprocating or disc type. then use a hot soldering tip or a mini torch to melt and seal the plastic cover back on. there could be an easier way, this would be my way of doing it.



This post has been edited by azian_advanced: May 8, 2009 - 1:41 PM

Yeah i saw the pic but thing is this view is way too close... i which there was a better one but hey thanks for the tip i'll try with my stock taillights before i touch my jdm's... just to be sure