Ever since I bought my car, I had a ISB problem. Since I am swapping out my motor for a 98 spec 5S getting ready for a FTE setup, I want to change the input shaft bearing. I have looked at the service manual and it isnt too descriptive of how it comes out. Has anyone done this before? Thanks
Has anyone done a input shaft bearing replacement? - 6G Celicas Forums
You've got to take the whole transmission apart.
IIRC you need to remove all the gears/bearings on the input shaft, I wouldn't recommend doing this yourself.
You should replace both bearings on the shaft while you're at it. When you press off a bearing it's very easy to damage it.
IIRC you need to remove all the gears/bearings on the input shaft, I wouldn't recommend doing this yourself.
You should replace both bearings on the shaft while you're at it. When you press off a bearing it's very easy to damage it.