interesting... want to get it. 
Feeler FS - 6G Celicas Forums
well then let's get numbers up like i started in my early posts.
1.808celica
1.808celica
I don't normally drive fast, but when I do its on a curvy section of this island
>
Its cool, I am ordering some as soon as I check a few things out from the first one, I should know next week on fitment and the
following week for the surface treatment and anodizing. I will order 10 plus whatever Colin needs for his GB.
I don't need any money until right before they ship, my boss will cover me until I sell some, so no worries.
QUOTE (808celica @ Jun 7, 2009 - 12:08 PM) 
>well then let's get numbers up like i started in my early posts.
1.808celica
1.808celica
Its cool, I am ordering some as soon as I check a few things out from the first one, I should know next week on fitment and the
following week for the surface treatment and anodizing. I will order 10 plus whatever Colin needs for his GB.
I don't need any money until right before they ship, my boss will cover me until I sell some, so no worries.
JDM guy made me do it.
Here are the numbers.
1. 808celica: 1
2. ComaDave: 2
1. 808celica: 1
2. ComaDave: 2
1. 808celica: 1
2. ComaDave: 2
3. Driveby: 1
2. ComaDave: 2
3. Driveby: 1
1994 JDM GT4 WRC
1. 808celica: 1
2. ComaDave: 2
3. Driveby: 1
4. Neil_Y: 1 silver
2. ComaDave: 2
3. Driveby: 1
4. Neil_Y: 1 silver
1. 808celica: 1
2. ComaDave: 2
3. Driveby: 1
4. Neil_Y: 1 silver
5. WALKER: 1
2. ComaDave: 2
3. Driveby: 1
4. Neil_Y: 1 silver
5. WALKER: 1
GT4WRC.COM
uhmmm,,,,,,,,,,, deciding on this or the clear gas lid,,,,,,,,,,,,,,, 
>
get both homie
i am 
QUOTE (joehernandez @ Jun 9, 2009 - 12:36 PM)
>uhmmm,,,,,,,,,,, deciding on this or the clear gas lid,,,,,,,,,,,,,,,
get both homie
i am
I don't normally drive fast, but when I do its on a curvy section of this island
I got the sample part in and am having another made because the first had no mounting holes.
I put some holes in and mounted it but I need to make sure there are no issues before I order more than one.
I hope to get the next before the weekend, we shall see. Aside from the missing holes I am very happy with the result.
I put some holes in and mounted it but I need to make sure there are no issues before I order more than one.
I hope to get the next before the weekend, we shall see. Aside from the missing holes I am very happy with the result.
JDM guy made me do it.
>
anticipate..
QUOTE (97lestyousay @ Jun 11, 2009 - 7:08 AM)
>I got the sample part in and am having another made because the first had no mounting holes.
I put some holes in and mounted it but I need to make sure there are no issues before I order more than one.
I hope to get the next before the weekend, we shall see. Aside from the missing holes I am very happy with the result.
I put some holes in and mounted it but I need to make sure there are no issues before I order more than one.
I hope to get the next before the weekend, we shall see. Aside from the missing holes I am very happy with the result.
anticipate..
Will you be getting any prototypes in black? as Id like to see if becomes un-noticeable compared to the silver.
1994 JDM GT4 WRC
I probably will get at least a few in black. I got the second plate today checked the hole alignment
and everything looks good so I will place the order for 20 tommorrow, hopefully by next friday
I will be shipping to anodizing, and within two weeks from that, out to you guys.
and everything looks good so I will place the order for 20 tommorrow, hopefully by next friday
I will be shipping to anodizing, and within two weeks from that, out to you guys.
JDM guy made me do it.
1. 808celica: 1
2. ComaDave: 2
3. Driveby: 1
4. Neil_Y: 1 silver
5. WALKER: 1
6. Artega: 1 Blank
2. ComaDave: 2
3. Driveby: 1
4. Neil_Y: 1 silver
5. WALKER: 1
6. Artega: 1 Blank
I know said before I would have a few blank ones made, I am sorry it is not going to happen.
I found out after the prototypes about the minimum setup charge and I just can't swing it for
a few parts. I already had to order more wrc than I wanted to get the price per unit down enough.
If enough people show an interest, I could do some blank ones at a later date maybe.
I found out after the prototypes about the minimum setup charge and I just can't swing it for
a few parts. I already had to order more wrc than I wanted to get the price per unit down enough.
If enough people show an interest, I could do some blank ones at a later date maybe.
JDM guy made me do it.
i want one one with wrc on it
how much to get it in italy?
i really want it
make me happy
how much to get it in italy?
i really want it
make me happy
I assume it would be similar to uk and aus/nz so about $15.00 more so about $90.00 USD
shipped to you.
shipped to you.
JDM guy made me do it.
ok u can count me in.
have u got paypal?
are they ready to ship?
thanks
have u got paypal?
are they ready to ship?
thanks
I will be ready to ship in a few weeks or less.
I will pm my paypal to everyone then.
I will post a FS thread when they are ready to go.
This post has been edited by 97lestyousay: Jun 13, 2009 - 10:51 AM
I will pm my paypal to everyone then.
I will post a FS thread when they are ready to go.
This post has been edited by 97lestyousay: Jun 13, 2009 - 10:51 AM
JDM guy made me do it.
i can't wait to get it
can i get 1 that says turbo? or trd?
>
I am just doing WRC as shown above, I am not making anymore TRD.
QUOTE (turbochloe @ Jun 14, 2009 - 1:58 PM)
>can i get 1 that says turbo? or trd?
I am just doing WRC as shown above, I am not making anymore TRD.
JDM guy made me do it.
how much sent to nj?
US would be $75.00 canada $80.00 and $90 to uk, aus, nz and pretty much anywhere else.
JDM guy made me do it.
whens the deadline or they made to order
>
I will be ready to ship in a few weeks or less.
I will pm my paypal to everyone then.
I will post a FS thread when they are ready to go.
QUOTE (turbochloe @ Jun 20, 2009 - 7:33 AM)
>whens the deadline or they made to order
I will be ready to ship in a few weeks or less.
I will pm my paypal to everyone then.
I will post a FS thread when they are ready to go.
JDM guy made me do it.
1. 808celica: 1
2. ComaDave: 2
3. Driveby: 1
4. Neil_Y: 1 silver
5. WALKER: 1
6. Celiquick: 1 Silver (Blank)
2. ComaDave: 2
3. Driveby: 1
4. Neil_Y: 1 silver
5. WALKER: 1
6. Celiquick: 1 Silver (Blank)
---------------------------------------------------------------------------------------------------------------------------------------------------Celiquick'97 Celica ST "Really" Limited Edition"I thought you always wanted an all-wheel drive, turbo-charged, Evo-eating machine sitting in your backyard.....who wouldn't?!?"Celica FS/Part-out
>
The feeler is over and no blank ones are being made sorry.
QUOTE (Celiquick @ Jul 8, 2009 - 9:37 PM)
>1. 808celica: 1
2. ComaDave: 2
3. Driveby: 1
4. Neil_Y: 1 silver
5. WALKER: 1
6. Celiquick: 1 Silver (Blank)
2. ComaDave: 2
3. Driveby: 1
4. Neil_Y: 1 silver
5. WALKER: 1
6. Celiquick: 1 Silver (Blank)
The feeler is over and no blank ones are being made sorry.
JDM guy made me do it.
randy did you put one away for me??? im getting paid this friday and the car is somewhat fixed but i'll live
I don't normally drive fast, but when I do its on a curvy section of this island
If you delete the black cowling underneath that, Will this stop water from getting on the turbo? Where I live it's rainy for most of the year, and this is my daily driver.
Mike W1996 Toyota Celica ST205 GT-FOURGT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC269awhp / 273ft-lbs