Promasta

#1

Hey guys i would like to see some more pics of the EUROU Type I kit before I buy it.
Also give your opinion on this kit.
These are the only pics I could find:

cheela

#2

that's TOTALLY sexy!
If I had a prefacelift model this would be the kit I would wanna get.
It looks like the Tom's lip. I like it!

---

*1997 Celica ST - 3SGE Greytop BEAMS*1977 Celica RA29 - Classic Cruiser*2005 Matrix AWD - dedded but still hanging around like a ghost2019 Rav4 XLE Premium - Sports mode is fun.

808celica

#3

you still can buy it?!?!?!? my friend has the euro rear. its sexy.

---

I don't normally drive fast, but when I do its on a curvy section of this island

azian_advanced

#4

---

----------------------------------------------------------------------------------------------------------------------------------------------------------------

Shigexile

#5

edit: wrong info

This post has been edited by Shigexile: Jun 16, 2009 - 10:31 PM

---

PROJECT 6TH GEN<FS: Things up for grabs><Progress>

whatthe

#6

Thats really nice, the wing remind me alot of the trd wing. But the whole body stylin gives off a sw20 look. Defo' diggin it.

---

[b]My Build Thread|Flickr|My Blog

Promasta

#7

thanks guys. need more opinions tho.

ya you can get it at japanparts.com the whole kit is only $300 but shipping is $900 which seems ridiculous.

whatthe that is a TRD wing lol EUROU did not make a wing.

i dunno i love the front and rear but the sides are meh i much prefer 404s or TRDs.

azian_advanced

#8

actually eurou do make wings, not just blocks.. one of the nicer aftermarket wings i might add

---

----------------------------------------------------------------------------------------------------------------------------------------------------------------

cheela

#9

$900 for shipping.. DAMMNNN!!!!

---

*1997 Celica ST - 3SGE Greytop BEAMS*1977 Celica RA29 - Classic Cruiser*2005 Matrix AWD - dedded but still hanging around like a ghost2019 Rav4 XLE Premium - Sports mode is fun.

SwissFerdi

#10

I don't like the wing, but the lips are nice.

This post has been edited by SwissFerdi: Dec 29, 2009 - 10:43 PM

---

'97 ST\ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+[sold 10/18]'93 MX-5LE

max-elle

#11

EUROU pieces, taken from japanparts (however this is type2 not type1)





about 250euro of pieces, about 350 for sending them from japan to Italy, about 550 of doganal fees and doganal work services from an import/export company (thief!!!)

yeahhhh, about 1150euro of goodness stuff!!
It hurts, oh yes it hurts very much!!!!

_Jim_

#12

>

QUOTE (Promasta @ Jun 17, 2009 - 9:45 PM)

>i dunno i love the front and rear but the sides are meh i much prefer 404s or TRDs.

Sounds like my setup. I have a Eurou front lip, and 404 rears and sides. Here are some pics for you.

---

330whp 309ft/lbs @ 21 PSI

delusionz

#13

Hmm, Is that Eurou front lip the same shape and fitment for both the ST205 & the ST20X N/A Pre-facelift bumpers? Or are they different pieces?

Also Jim, Don't shoot me for pointing it out, but your Celica badge is a little bit lower than it should be (If you're trying to get the JDM look there), the middle of the badge should line up horizontally with the middle of the crease in the boot.

I just took a measurement from the ST202, The bottom line of the badge should be 26mm from the bottom, and the right side of the A in CELICA is 40mm from the right.

On the ST205 the bottom of the CELICA and the GT-Four badges are 26mm from the bottom, the right side of the A in celica is 31mm from the right and the left side of the G in GT-Four is 23mm from the left, Hope that helps.

---

Mike W1996 Toyota Celica ST205 GT-FOURGT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC269awhp / 273ft-lbs

_Jim_

#14

>

QUOTE (delusionz @ Jun 23, 2009 - 6:23 PM)

>Also Jim, Don't shoot me for pointing it out, but your Celica badge is a little bit lower than it should be (If you're trying to get the JDM look there), the middle of the badge should line up horizontally with the middle of the crease in the boot.

I just took a measurement from the ST202, The bottom line of the badge should be 26mm from the bottom, and the right side of the A in CELICA is 40mm from the right.

On the ST205 the bottom of the CELICA and the GT-Four badges are 26mm from the bottom, the right side of the A in celica is 31mm from the right and the left side of the G in GT-Four is 23mm from the left, Hope that helps.

? This is an OEM WRC ST205 front bumper....it came predilled from the factory, so maybe its just the angle the picture is taken that is throwing you off.

---

330whp 309ft/lbs @ 21 PSI

presure2

#15

>

QUOTE (_Jim_ @ Jun 26, 2009 - 7:33 PM)

>>

QUOTE (delusionz @ Jun 23, 2009 - 6:23 PM)

>Also Jim, Don't shoot me for pointing it out, but your Celica badge is a little bit lower than it should be (If you're trying to get the JDM look there), the middle of the badge should line up horizontally with the middle of the crease in the boot.

I just took a measurement from the ST202, The bottom line of the badge should be 26mm from the bottom, and the right side of the A in CELICA is 40mm from the right.

On the ST205 the bottom of the CELICA and the GT-Four badges are 26mm from the bottom, the right side of the A in celica is 31mm from the right and the left side of the G in GT-Four is 23mm from the left, Hope that helps.

? This is an OEM WRC ST205 front bumper....it came predilled from the factory, so maybe its just the angle the picture is taken that is throwing you off.

he's talking about the rear badges, jim.

---

Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered

_Jim_

#16

o0o0o0o0o LOLOLOL thanks delusionz, but my "goal" was not to make my car look like anything other than what I thought looked nice, and I achieved that. But thanks for taking the time to measure and post the differences in the location of the Celica symbol.

---

330whp 309ft/lbs @ 21 PSI

Promasta

#17

kloudkicka

#18

hey promasta, i have the front eurou lip on my ride too, you've probably seen it before, but ya personally its my favorite next to the c-one lip

Promasta

#19

ya i got the same one as you but i don't have a gt-four front end lol.
i need the one for the 94/95 bumper.

kloudkicka

#20

ya man, i say do it, that lip looks nice even without a gt-four conversion, but if i were to give you my opinion, c-one front lip, thats the way to go, thats what i shoulda done

>

QUOTE (Promasta @ Dec 31, 2009 - 11:55 PM)

>ya i got the same one as you but i don't have a gt-four front end lol.
i need the one for the 94/95 bumper.

deathdoakill

#21

hey guys i was wondering wut wing is on the first celica on the first post is that a trd stye wing anyone know who makes it how much it costs ect. this would go well with the design shceme im doing thnks guys

vincent_doggy

#22

Should be A TRD

---

Kamikaze eShop 神風 onFacebook

joehernandez

#23

>

QUOTE (_Jim_ @ Jun 22, 2009 - 6:55 AM)

>>

QUOTE (Promasta @ Jun 17, 2009 - 9:45 PM)

>i dunno i love the front and rear but the sides are meh i much prefer 404s or TRDs.

Sounds like my setup. I have a Eurou front lip, and 404 rears and sides. Here are some pics for you.

hey jim what is the clearance of the front lip to the ground.
the lip i have if i dont support it correctly is almost kissing the ground
and hits almost everywhere.
i am trying to look for a new lip but i cant find one that i like,,
however that lip you have looks sexy.

mik3y

#24

i just got a 94 celica and ive been looking for kits and the one your guna get is the type ive been looking for i love it its perfect

2celicas2love

#25

i could live with out the wing but the rest of the kit is the best one that is out there. i want that euro lip BAD!!

---

The heart has its reasons which reason knows nothing of2000 7th gen GTS 6spd95 st, swapped 3sgte 3rd gen wrc version :D

BonzaiCelica

#26

what rims are on those RED Celica. OZ??

---

Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514

Promasta

#27

just won the bid on this from keith

smkr3w

#28

>

QUOTE (Promasta @ May 22, 2012 - 7:49 AM)

>just won the bid on this from keith

very nice

---

6gcHeroes:808hectortimmybatmandiegotigamak