Over 1M Posts • 84K Topics • 9K Authors

FS ChrisD's Garage Clean-Out (Prices Dropped!) - 6G Celicas Forums

Topic #68289 15 posts Started by ChrisD
I seriously need to clear some space in my garage. So, I'm selling off a bunch of stuff I've got sitting around.

I am willing to deliver these in Calgary, or to the Ogopogo meet next month. However, I will not 'reserve' items. First to pay gets it. I won't bring larger items to the Ogopogo meet unless they are paid for.

All prices in US Dollars unless otherwise specified

Post here, PM me, or email me chris_dittrick@yahoo.ca for shipping quote. I prefer paypal for payment.

I have higher res images available upon request, by email only.

>>SOLD>> 3S-GTE Aluminum Straight Intake Kit for recirculated BOV's $90 canadian$ + shipping (used)
Includes everything shown in the 2nd pic. Aluminum pipe with 1" bung for BOV, 1/2" bungs for the other two hoses, 1x 3" silicone coupler, 2x 1" silicone couplers for BOV, AFM adaptor with rubber gasket, 2x 1" T-bolt clamps, 3x 3" clamps, and air filter. Filter is old and I suggest replacing. You will still need a 2.75" to 3" coupler to go from the intake pipe to the turbo. You could use a samco T-hose or have the intercooler inlet welded like I did. Worked very well.

http://gtfour.ca/DSC01901-1.JPG
http://gtfour.ca/forsale/intake1.jpg

Nordskog Intake Temperature Gauge $20 + shipping (price drop was $30 + shipping (new in box)
Green lighting to match factory gauges. I purchased from Summit ($65), although they say that it includes the sending unit it does not. These are available for $20. Silicone Intakes says they have them for $60 with the sending unit.



Mallory Promaster Coil -- $45 + shipping (price drop was $60 + shipping) (new in box)
Purchased from Summit ($86) http://www.summitracing.com/parts/MAA-29625/ , never got around to using it. Since I might not ever, might as well go to someone who can use it. Includes everything included in original package.



Hella 500 Fog Lights $45 + shipping (price drop was $55 + shipping) (new in box)
Purchase from Summit ($80) http://www.summitracing.com/parts/HLA-H13750611/ , never installed them. Cool lights though, I always intended to make some sort of bumper mount and have them in the middle rally style. Includes everything from original packaging. They are about 6" in diameter, maybe a tad more. 2 1/4" deep.



Injector Duty Cycle / A/F gauge: $40 + shipping (price drop was $50 + shipping)
New sells for nearly $100.



>>SOLD>> 3" Alltrac Cat Back Exhaust - HKS & Custom $100 + shipping (used, reasonable condition)
Uses an angle/slash cut Megan Racing muffler. 3" straight through. HKS pipe from midpipe to over axle peice. Over axle is custom. All mild steel. Had a *really* nice sound to it. Muffler tip is ~4.5". Will include a brand new silencer also. To install you will have to drill a small hole in the muffler tip and use a small nut/bolt.

http://gtfour.ca/forsale/exhaust1.jpg
http://gtfour.ca/forsale/exhaust2.jpg
http://gtfour.ca/forsale/exhaust4.jpg
http://gtfour.ca/forsale/exhaust3.jpg

>>SOLD>> Greddy PCV Catch Can $55 + shipping (used, good condition)
These seem to range new from $80-100. I used this on my car for several years with success. It is chrome, looks good in the engine bay. The hose outlets are the correct size for the Celica. I think it is 15mm but not 100% sure. It fits our cars, thats the important thing. smile.gif

http://gtfour.ca/forsale/greddy.jpg

>>SOLD>> XS Power Downpipe $50 + shipping (new in box)
Brand new, came with my ST205 exhaust but it is the Gen 2 version for the 3sgte. Support bracket not included as XS Power did not include it. 2 extra bungs. If you would like, I can also gasket match the flange for you so that the wastegate clears properly (they have issues with this). Includes gaskets/bolts.

http://gtfour.ca/forsale/downpipe.jpg

6 Gen II Side Feed Fuel Injectors (440cc/min)
$10 each for the 4 pulled from my working engine
$15 each for the 2 that have been cleaned & flow tested by WitchHunter
+shipping

Sold as is, includes what you see in the pic.



ST165 stock radiator fan $10 + shipping (price drop was $15 + shipping (used)
Sold as is, but worked fine. Motor was replaced a couple years ago, and likely has ~15,000 km's on it.



More stock parts (make offers, not looking for a bunch on these) (used)
-ST165 Starter - compatible with gen II and probably more
-ST165 throttle body, ISC
-ST185 throttle body, ISC
-ST165 throttle position sensor
-ST185 throttle position sensor
-Fuel pump resistor
-Fuel injector resistor pack
-St165 Coil







Various ST165 bodykit peices $35 + shipping for all 8 or $10 per peice (price drop was $10 per peice, $50 if you take all 8 + shipping (used)
Some are in ok condition, some would need to be sanded and painted. Do not include metal backings.



>>SOLD>> 6th Gen OEM Rain Deflector $50 + shipping (used)
Taken off of my ST205. One is in perfect condition, one has 2 cracks shown below. However they are in working condition and the clips are all good. Not sure, does it fit on the 5th gen too?

http://gtfour.ca/forsale/deflector1.jpg
http://gtfour.ca/forsale/deflector2.jpg
http://gtfour.ca/forsale/deflector3.jpg
http://gtfour.ca/forsale/deflector4.jpg

15" 7th gen GT wheels + tires -- $200 + shipping (price drop was $300 + shipping) (used)
Bridgestone Potenza RE92 tires, 195/60R15. Wheels are 6.5" wide, +39 offset, and ~21 lbs each. They fit perfectly, no rubbing on the ST165 even with lowered ride height. 1 has been curbed, shown in pics. Others in good condition. These wheels look fantastic on the 4th gens imho. I recently upgraded to Volk TE37's and now have no space in my garage. 2 tires are at 15%, 2 are at 40% (see pics as I am not an expert). Will ship at buyers expense and will deliver to Ogopogo meet next month if someone pays first.









Wheel 1 (worst condition)







Wheel 2





Wheel 3





Wheel 4





This post has been edited by ChrisD: Jul 17, 2009 - 10:27 AM

1988 ST165 w/ 185 eng.Project1994 ST205 WRCProject2010 Acura RDX Turbo AWD "The DD"
Dibs on 6th Gen OEM Rain Deflector $50 + shipping. Youve been pmd.

[b]My Build Thread|Flickr|My Blog
Yeah.......I want the intake setup.
hey how much is shipping for the exhaust to 02136? to you have the pipe that connects to the dp?


also can you check for shipping brampton ON l6z2x7

This post has been edited by pipes: Jul 8, 2009 - 5:22 PM
can anyone tell me... the downpipe... thats not the same bolt pattern on a t25 exhaust housing is it?

Breaking Axles...
ok. the exhaust, intake, and downpipe are tentatively sold. Rain deflectors still available, these will be sold as a pair (unless you will pay $50 for one). wink.gif

bolt pattern should be different, this is for the Toyota CT26 series turbo.

1988 ST165 w/ 185 eng.Project1994 ST205 WRCProject2010 Acura RDX Turbo AWD "The DD"
hey dude

Dibs on the rain deflectors. how much for them shipped to denmark mate?

Rene

[font=CELICA FOREVER][/font]
pm's sent,

1988 ST165 w/ 185 eng.Project1994 ST205 WRCProject2010 Acura RDX Turbo AWD "The DD"
interested in intake piping. PM me.

proud =3sgte SWAPPED= '95 Celica ST owner [calling it the GT2 or half-trac]309,000 miles n' ....dead-> ALIVE AGAIN!! ~14,000 miles driven
Intake, exhaust, downpipe, catch can, and rain deflectors all sold.

I believe I have responded to everyone who has inquired. Let me know if I forgot you.

This post has been edited by ChrisD: Jul 13, 2009 - 12:45 PM

1988 ST165 w/ 185 eng.Project1994 ST205 WRCProject2010 Acura RDX Turbo AWD "The DD"
If bodykit pices aval. Pm me also plz thanks

94 st
bodykit peices have 2 people in line for them, will let you know if they back out. smile.gif

1988 ST165 w/ 185 eng.Project1994 ST205 WRCProject2010 Acura RDX Turbo AWD "The DD"
prices dropped! smile.gif

1988 ST165 w/ 185 eng.Project1994 ST205 WRCProject2010 Acura RDX Turbo AWD "The DD"
Chris - will the TPS unit you have work on a 5s??

KAOS|THE PROGRESSION - SLOW & STEADY|PARTING OUT- it ALL must go!|
those 7th Gen wheels won't clear the calipers on the ST205 right?