wow really impressed your guage cluster, 3x 194LED (5 led in 1 360*) and just white for the colour??
ST202 SS-II CELICA threadNew Zealand members check inSticky thread's: How to contribute and troubleshoot.
>
QUOTE (Rusty @ Aug 26, 2009 - 8:21 PM)
>wow really impressed your guage cluster, 3x 194LED (5 led in 1 360*) and just white for the colour??
yups 3 194
HID white 
refractor type is what its called. 4 3mm leds shoot 360 and 1 5mm led shoots straight.
I don't normally drive fast, but when I do its on a curvy section of this island
I don't normally drive fast, but when I do its on a curvy section of this island
Looks good. I love the door panel courtesy lights. I'll probably end up doing that to my car too. Great job.
Wow! Nice job man!
I didnt think the door LEDs were gonna look good at first, but they look awesome at night!
◊◊◊My F/S Thread!◊◊◊QUOTE(14:19:21) Daniel: That was a JDM hole in the side of the box too. There was so much JDM trapped inside that box that they couldn't contain it, so they had to put a JDM hole in the box to let the JDM out.QUOTEFerdi says (11:29)No, it looks like a hooker put her acid vag on your hood. Acid vag = bigger problem than a few dings.
that's a nice job, the gauges and door looks awesome, not a big fan of the green lights but an overall looks great
LED lights always do a nice job
1994 ST Celica --> no swap --> 7A rebuild1974 Mustang --> Almost Restored
wow, good job. I've been wanting to do LEDs too but couldn't decide on a color. this just sealed it for me. I won't be doing the purple/green look though. If you throw in some gold accents, you'll have a mardi-gras car
I'm just playin' it looks good. and i love the doors.
'99 Celica GT - Sold'11 Mazdaspeed3
lolz thanks guys
the green is just for that filipino acent
I don't normally drive fast, but when I do its on a curvy section of this island
hey were u get the clear covers for the regular cortesy lights i wanted to put led in it for the longest but mine has a red cover so no matter wat color led i got itll look red.
by the way looking real good. i have a similar idea with led strips but never paned out urs look kool thoo
This post has been edited by spy00005: Aug 28, 2009 - 3:49 PM
*Thing i want for my car(i wish i had money)*-full gt4 front end conversion(DONE :) JUST NEEDS PAINT(next on to do list)-new seats all around-riser blocks-fog lights-new radio and speakers all around-full bodykit splitters and sideskirts to go with conversion(just needs fitting and painting)-nice rims(Got TC rims and painted them white)-light blue tint (next step will do this right after i get my paint job)WTB Reasonably pricedProjectors just Lows
Clear lens where from a Lexus ES. I'll go hop over the Club Lexus forums and get the part number
This thread shows this part number:
81230-30140 $19.32
This thread shows thispart number:
81231-50010
Go to a lexus dealer and ask them for an ES300 clear courtesy lights and see if these numbers match
This post has been edited by 808celica: Aug 28, 2009 - 4:22 PM
I don't normally drive fast, but when I do its on a curvy section of this island
Also you can get clear lens' from the 2002 Model Sienna vans. i have those in my van but im not gonna take them out Hahahah
I don't normally drive fast, but when I do its on a curvy section of this island
thanks a lot both those part # are right. WTF you say? this is why
i went to toyota part zone .com i can look up almost any part and part #
81230-30140 OEM Toyota LAMP ASSY, COURTESY Retail Price: $17.38
81231-50010 OEM Toyota LENS,COURTESY Retail Price: $7.21
one is lens and other is assembly i think gonna double check the assembly includes lens but im gonna buy just 2 of the lens thanks a lot 808 ima prob do mines blue or white.
*Thing i want for my car(i wish i had money)*-full gt4 front end conversion(DONE :) JUST NEEDS PAINT(next on to do list)-new seats all around-riser blocks-fog lights-new radio and speakers all around-full bodykit splitters and sideskirts to go with conversion(just needs fitting and painting)-nice rims(Got TC rims and painted them white)-light blue tint (next step will do this right after i get my paint job)WTB Reasonably pricedProjectors just Lows
no probs. post pics when you're done
I don't normally drive fast, but when I do its on a curvy section of this island
I've been thinking about doing a LED corner lens conversion from the new Porsche's. I hope the contour of the bumper is the same in that area, I can plastic weld the rest to make it look sweet. I have to wait for $$ though..
-Jay95 GT conv. project car: Manual, Gen III 3sgte, JN pisons, Eagle rods, overbore, crank knife-edged, crank scraper, ARP head/main/flywheel, Autronic EMS, Haltech Dual Wideband O2 controller, Audi 1.8T individual coils, FMIC and SSQV BOV, 3" downpipe, 3" ultra-high-flow cat, 2.5" Borla muffler, +other01 S2000: FMIC, Haltech EMS, Haltech wideband, 570cc inj, forged pistons/rods, sleeved block, 5 angle valve job, ported and polished02 R6, all stock, except for braided stainless brake lines, frame sliders, and adjustable brake/clutch leve
Did you have to sand your gauges or do anything else to get them that white?
>
QUOTE (gt_driFFter @ Aug 29, 2009 - 4:11 AM)
>Did you have to sand your gauges or do anything else to get them that white?
its actually hid white. the camera just made it like that. its a little dimmer and with a hint of blue
I don't normally drive fast, but when I do its on a curvy section of this island
it looks puuurty at night
1995 GT::::Diffusing the Situationエキサイティングカーレーシングチーム!march2010 COTM:6GCfeature2014:january2015-2016-2018 COTM
dude how did you removed the lens to change the bulbs, I'm stock trying to remove those so I can go shopping and start my lights change
1994 ST Celica --> no swap --> 7A rebuild1974 Mustang --> Almost Restored
>
QUOTE (yagamius @ Aug 31, 2009 - 6:40 AM)
>dude how did you removed the lens to change the bulbs, I'm stock trying to remove those so I can go shopping and start my lights change
i have a pick set
you can either pry it with a pick or a flat head screw driver (carefully) or take your door panels out and take out the whole assembly from the back.
I don't normally drive fast, but when I do its on a curvy section of this island
Hey nice lights.
How did you do the courtesy door light white?
how do you change the color of the key ring? is there a place i can go to show me how to access it?
>
QUOTE (Marc6818 @ Sep 2, 2009 - 7:08 PM)
>how do you change the color of the key ring? is there a place i can go to show me how to access it?
i can do a step by step write up if you want
>
QUOTE (MrAyasli @ Sep 2, 2009 - 12:48 AM)
>Hey nice lights.
How did you do the courtesy door light white?
hid white 194 led bulb and Lexus ES300 clear door lens
I don't normally drive fast, but when I do its on a curvy section of this island
where did you order all of these from again?
have you had any of them blow out yet?
15PSI - 30MPG - Megasquirt Tuned
>
QUOTE (lagos @ Sep 3, 2009 - 5:56 PM)
>where did you order all of these from again?
have you had any of them blow out yet?
most off ebay, a couple from Vleds.com, and like 2 from my friends shop.
and no
*knock on wood*
I don't normally drive fast, but when I do its on a curvy section of this island
Hey for the Lexus ES300 door lens it's hard to find.
Where did you get yours?
im part of Club Lexus Hawaii so i got hook ups
I don't normally drive fast, but when I do its on a curvy section of this island
Official!!!! 1156 LED bulbs DO NOT FIT in my reverse tails location. The bulb is slightly bigger and wont fit in 
i could enlarge the hole a little but i dont know if water will get in. So im leaving that, i might also have to leave teh rest of the tail bulbs alone if this is the case.
I don't normally drive fast, but when I do its on a curvy section of this island
