Just posting before I head to work, does anyone know the part number for the lighted ring around the ignition keyhole? My car didn't have it installed and I'd like to have it and change it to red, same thing for the cig lighter, except I need the entire unit + the light ring. Any help would be appreciated, thanks.

Also, I was looking through the clock color thread a few minutes ago, does anyone know the BEST solution? The thread proved rather inconclusive and I don't know what route to take to make the clock red instead of green. Maybe the bulb (and if someone has a part number for that?) could be changed? If there is a bulb?

>


There is no bulb, you'll need to modify it externally. I use a coloring gel on my clock. It's kind of annoying doing it with a gel because the gel (at least the one I have) is shiny and during the day makes the clock slightly hard to see through the glare. I've gotten used to it though. Ideally, you'll be able to find a matte color-filter to put between the clock and the outside.

http://www.rosco.com/

I had gels from them handy (a whole sample book) from my camera gear.

Alright. There's a Rosco dealer about 3 minutes away from me, so that works out excellently.

Does anyone know the part number for the keyring light and entire cig lighter unit with ring? I can't seem to find it on Toyodiy ):

www.toyodiy.com

>

>


Not to be a jerk but...
Also, half the site appears to be under construction.

This post has been edited by Espo: Aug 22, 2009 - 1:53 PM

works fine for me

http://www.toyodiy.com/parts/g_E_1997_TOYO...R-BLMGFW_2.html

Oh okay, my fault. I didn't know you could click on the links (duh) on the side to get the part number.

Some web designer/programmer I'm going to be haha