Does anyone still have the chart that describes which cut is required on our bump stops. There are four types apparently, just need to know if its A, B, C, or D
Bump Stop Chart Tein S-Techs - 6G Celicas Forums
Damn i dont remember what i used. could you scan and post a pic of the chart your looking at?
I don't normally drive fast, but when I do its on a curvy section of this island
I have the chart. Ill put the info up when i get home
I cut the top section off. for lowered cars. the base i would not touch because it sits a solid flat.
94 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi||Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto||Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr804 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy|89 Supra (Sold)90 Supra (Sold)
ok, you want cut type a in the front, and nothing done to the rear. Pretty much your going to cut the two lower "humps" off......
(_________)
(________)
(_______) <------Cut that off
(______) <------And cut that off as well!
Please excuse the crappy thing I just did, dont feel like scanning instructions.
(_________)
(________)
(_______) <------Cut that off
(______) <------And cut that off as well!
Please excuse the crappy thing I just did, dont feel like scanning instructions.
sweet just what i was looking for, thanks