vincent_doggy

#31

Trd Wing for Hatch

1. TiGZ461
2. whatthe
3. Chacha - CF Center piece and side cover
4. 95st-celica

This post has been edited by vincent_doggy: Sep 24, 2009 - 8:05 PM

---

Kamikaze eShop 神風 onFacebook

chacha

#32

Trd Wing for Hatch

1. TiGZ461
2. whatthe
3. Chacha - whole TRD wing (all CFs) + 1 extra Center piece CF and 1 pair side cover in CF with all the nuts and bolts with it
4. 95st-celica

This post has been edited by chacha: Sep 24, 2009 - 8:48 PM

NGHTKD

#33

>

QUOTE (chacha @ Sep 24, 2009 - 9:47 PM)

>Trd Wing for Hatch

1. TiGZ461
2. whatthe
3. Chacha - whole TRD wing (all CFs) + 1 extra Center piece CF and 1 pair side cover in CF with all the nuts and bolts with it
4. 95st-celica

Just a q...

So are you only making CF centre pieces and CF Spoiler, or can make F/G side pieces with CF centre piece???

Either way, I'm off the Eurou project and on this one:

1. TiGZ461
2. whatthe
3. Chacha - whole TRD wing (all CFs) + 1 extra Center piece CF and 1 pair side cover in CF with all the nuts and bolts with it
4. 95st-celica
5. NGHTKD

BTW - a thanks to Presure and his Mrs!!!

This post has been edited by NGHTKD: Sep 24, 2009 - 9:17 PM

TiGZ461

#34

BTW I want make a change



1. TiGZ461-CF center piece and CF covers
2. whatthe
3. Chacha - whole TRD wing (all CFs) + 1 extra Center piece CF and 1 pair side cover in CF with all the nuts and bolts with it biggrin.gif
4. 95st-celica
5. NGHTKD

---

1996 Toyota Celica ST 25th Anni. Edition #461

crwarrior

#35

hey VIN!

ill lend you my spoiler if its fine with you??

no cracks so you shouldent really have much of a problem...i can take more pictures if you want AND also...my TRD wing is for coupe as well not hatch

http://i198.photobucket.com/albums/aa201/h...tspaul/0045.jpg

let me know

2bcelica

#36

1. TiGZ461-CF center piece and CF covers
2. whatthe
3. Chacha - whole TRD wing (all CFs) + 1 extra Center piece CF and 1 pair side cover in CF with all the nuts and bolts with it biggrin.gif
4. 95st-celica
5. NGHTKD
6. 2bcelica

Slick

#37

I am SO in!! Will the sides be FG or CF? Either way, I want them. I'll just have to paint the sides anyway.

1. TiGZ461-CF center piece and CF covers
2. whatthe
3. Chacha - whole TRD wing (all CFs) + 1 extra Center piece CF and 1 pair side cover in CF with all the nuts and bolts with it biggrin.gif
4. 95st-celica
5. NGHTKD
6. 2bcelica
7. Slick - CF center piece and CF covers

---

"Remember, amateurs built the ark and professionals built the Titanic. Butrevolutionariesbuilt the Celica!"- Me

808celica

#38

anyone know the length of the center piece???

---

I don't normally drive fast, but when I do its on a curvy section of this island

diegohiga

#39

I'm down for one too!!! I want the whole spoiler in CF but I want it black for my hatch!! Let me know when you are ready to ship it!!

delusionz

#40

>

QUOTE (SwissFerdi @ Sep 25, 2009 - 5:48 AM)

>Yep, regular 3-post. I'm not sure if I'd want just the spoiler wrapped or the posts as well...but take your time man, I have to look into my funds anyway after I get a quote and I don't want you to think you have a sale when you don't.

I will for sure make a thread then, though.

3post without the middle post

---

Mike W1996 Toyota Celica ST205 GT-FOURGT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC269awhp / 273ft-lbs

SwissFerdi

#41

>

QUOTE (delusionz @ Sep 26, 2009 - 12:52 AM)

>3post without the middle post

My man! I was thinking that too, I guess I'll consider you #2?

---

'97 ST\ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+[sold 10/18]'93 MX-5LE

NWCelica

#42

I'm in for one .....

NGHTKD

#43

I really hope this GB goes ahead, come on people!

1. TiGZ461-CF center piece and CF covers
2. whatthe
3. Chacha - whole TRD wing (all CFs) + 1 extra Center piece CF and 1 pair side cover in CF with all the nuts and bolts with it biggrin.gif
4. 95st-celica
5. NGHTKD (50/50 depending on final price)
6. 2bcelica
7. Slick - CF center piece and CF covers
8. diegohiga
9. NWCelica

This post has been edited by NGHTKD: Sep 28, 2009 - 10:28 AM

TiGZ461

#44

Looks like I'm have to back out of this one, I have other things to take care of right now.

1. whatthe
2. Chacha - whole TRD wing (all CFs) + 1 extra Center piece CF and 1 pair side cover in CF with all the nuts and bolts with it biggrin.gif
3. 95st-celica
4. NGHTKD
5. 2bcelica
6. Slick - CF center piece and CF covers
7. diegohiga
8. NWCelica

Depending on the release date, I might have to wait on the second bash. But if its gonna take at least a couple months to make then I guess I'm still in.

---

1996 Toyota Celica ST 25th Anni. Edition #461

st3v3o

#45

>

QUOTE (vincent_doggy @ Sep 24, 2009 - 10:51 AM)

>Yea, I know they are different
I think the following is the TRD Curren Wing, correct me if I am wrong

If this is the wing you need... i actually got this car now.... hit me up... and see if you still need it...

808celica

#46

>

QUOTE (st3v3o @ Sep 27, 2009 - 10:32 PM)

>>

QUOTE (vincent_doggy @ Sep 24, 2009 - 10:51 AM)

>Yea, I know they are different
I think the following is the TRD Curren Wing, correct me if I am wrong

If this is the wing you need... i actually got this car now.... hit me up... and see if you still need it...

wanna measure the center piece length for me???

---

I don't normally drive fast, but when I do its on a curvy section of this island

presure2

#47

the wing is off the car, just need to dissasemble it and get a shipping quote for vin.

vincent, when you have these made, are the mounting locations going to have metal threaded inserts?
that is my only concern in having these made, is how they mount to the car. im not a fan of screwing directly into fiberglass and asking it to hold. lol
ill take a couple pics of how mine are for refrence tonight.

---

Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered

OOBE

#48

^ GREAT point!

---

Past -7A-FTE: Will never forget youPresent -3rd Gen3S-GTE: Swap in progressQUOTE (SinisterSinner @ Dec 19, 2009 - 10:52 AM)I dont want to even think of turbos, they blow up way too often...

presure2

#49

808: the center section on my wing is roughly 43 3/16", but its not straight. its actually a compound curve.
ok here are a few pics of what i am talking about.
its a little hard to tell, but in these pics, the threaded section you see is actually a metal insert that the fiberglass post is made around.
that way, it mounts and holds much like OEM.

(ignore the ghetto gasket..lol)







vin, also another thing the wifey just mentioned actually. the TRD wing center section is normally adjustable into 3 diffrent positions, this copy i have from chrisc is also adjustable, i assume your guys will be able to replicate it without an issue, correct?
the center adjusts by changing the "washer" that goes thru the post into the center section.
here are a couple pics of that:





by flipping those washers into diffrent positions, you can adjust the angle of the wing into the 3 diffrent positions.

a couple of the whole wing for refrence:




man, she looks naked without that wing!

---

Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered

samir0189

#50

^^ naked, but sleek!!! Not bad!

---

◊◊◊My F/S Thread!◊◊◊QUOTE(14:19:21) Daniel: That was a JDM hole in the side of the box too. There was so much JDM trapped inside that box that they couldn't contain it, so they had to put a JDM hole in the box to let the JDM out.QUOTEFerdi says (11:29)No, it looks like a hooker put her acid vag on your hood. Acid vag = bigger problem than a few dings.

SwissFerdi

#51

How are you plugging the holes?

---

'97 ST\ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+[sold 10/18]'93 MX-5LE

vincent_doggy

#52

Manny, the supplier have skills, as they did the varis roof spoiler awhile ago, similar set up with stainless, so would be alright!!

This post has been edited by vincent_doggy: Sep 28, 2009 - 6:10 PM

---

Kamikaze eShop 神風 onFacebook

presure2

#53

>

QUOTE (SwissFerdi @ Sep 28, 2009 - 6:01 PM)

>How are you plugging the holes?

i just covered them with some clear tape. i definetly wouldnt seal the holes, at least not on jenns car, with the extensions+ gt4 front, ect it just looks like its missing somthing.

vin, awesome.
ill be in contact a little later in the week with a shipping quote.
any idea how long it will take for them to produce a finished product for you?

---

Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered

SwissFerdi

#54

Okay, as long as it holds. I used nylon plugs and silicone beforehand.

---

'97 ST\ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+[sold 10/18]'93 MX-5LE

taras_GT

#55

Hey Vince, what's the total shipped price to the UK?

1. whatthe
2. Chacha - whole TRD wing (all CFs) + 1 extra Center piece CF and 1 pair side cover in CF with all the nuts and bolts with it biggrin.gif
3. 95st-celica
4. NGHTKD
5. 2bcelica
6. Slick - CF center piece and CF covers
7. diegohiga
8. NWCelica
9. Taras_GT (depending on price)

---

TRD -ST205-[color="#4B0082"][/color][size="5"][/size][font="Palatino Linotype"][/font]

lilgreenyoda

#56

>

QUOTE (808celica @ Sep 28, 2009 - 9:34 PM)

>>

QUOTE (st3v3o @ Sep 27, 2009 - 10:32 PM)

>>

QUOTE (vincent_doggy @ Sep 24, 2009 - 10:51 AM)

>Yea, I know they are different
I think the following is the TRD Curren Wing, correct me if I am wrong

If this is the wing you need... i actually got this car now.... hit me up... and see if you still need it...

Would you be able to do something similar to that pic with half the rise? Not a tall spoiler kind of guy. But something like that, just half as high would be sick if it's possible. IF you can do that, you can add me to that list

1. whatthe
2. Chacha - whole TRD wing (all CFs) + 1 extra Center piece CF and 1 pair side cover in CF with all the nuts and bolts with it biggrin.gif
3. 95st-celica
4. NGHTKD
5. 2bcelica
6. Slick - CF center piece and CF covers
7. diegohiga
8. NWCelica
9. Taras_GT (depending on price)
10. yoda***

NGHTKD

#57

1. whatthe
2. Chacha - whole TRD wing (all CFs) + 1 extra Center piece CF and 1 pair side cover in CF with all the nuts and bolts with it biggrin.gif
3. 95st-celica
4. 2bcelica
5. Slick - CF center piece and CF covers
6. diegohiga
7. NWCelica
8. Taras_GT (depending on price)
9. yoda***


This post has been edited by NGHTKD: Oct 10, 2009 - 9:19 AM

st3v3o

#58

>

QUOTE (lilgreenyoda @ Sep 29, 2009 - 12:31 PM)

>>

QUOTE (808celica @ Sep 28, 2009 - 9:34 PM)

>>

QUOTE (st3v3o @ Sep 27, 2009 - 10:32 PM)

>>

QUOTE (vincent_doggy @ Sep 24, 2009 - 10:51 AM)

>Yea, I know they are different
I think the following is the TRD Curren Wing, correct me if I am wrong

If this is the wing you need... i actually got this car now.... hit me up... and see if you still need it...

Would you be able to do something similar to that pic with half the rise? Not a tall spoiler kind of guy. But something like that, just half as high would be sick if it's possible. IF you can do that, you can add me to that list

1. whatthe
2. Chacha - whole TRD wing (all CFs) + 1 extra Center piece CF and 1 pair side cover in CF with all the nuts and bolts with it biggrin.gif
3. 95st-celica
4. NGHTKD
5. 2bcelica
6. Slick - CF center piece and CF covers
7. diegohiga
8. NWCelica
9. Taras_GT (depending on price)
10. yoda***

Honestly the pic makes it look bigger than what it is.... i kinda grew into it already... i never really liked wings up until i got this car... i just don't like that it's right on my view to see rear traffic.... but it looks good... not THAT high but would be better a bit shorter

richee3

#59

I may be interested, depending on the price.

---

"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us touse the search button!2006 Aston Martin V8 Vantage.1998 Celica GT-BEAMSSwapped.2022 4Runner TRD Off Road Prenium.2021 GMC Sierra AT4.

Stambo

#60

Once final price is figured out, i'd be down for the curren wing/coupe trd wing

---

2nd Gen 3s-gte.... It lives!97celiman"92-gt-quit making up random acronyms that dont mean anything. the only real acronym is JDM"