looking good!
Sunwukongg's progress thread. - 6G Celicas Forums
just refreshed page one a bit too
This post has been edited by sunwukongg: Nov 11, 2010 - 12:06 AM
nice rims I give them a 
Those rims have a offset of +42 thats why they looked sucked in. I would recommend getting some 10 mm spacers front and back, but they will cost you around $220. I see that you have listed racing beat end links, remember those only come for the rears. They are priced at around $70 and the two's r us links are around $80 for both the front and the rear.
Also I agree your supra spoiler was a good buy and it suits the cars look very well at the moment. Once you put sideskirts on I think you should get the SS-III Raiser blocks. Is that you in the pic with crazy spikey hair the asain dude??
This post has been edited by BonzaiCelica: Nov 11, 2010 - 4:40 AM
Those rims have a offset of +42 thats why they looked sucked in. I would recommend getting some 10 mm spacers front and back, but they will cost you around $220. I see that you have listed racing beat end links, remember those only come for the rears. They are priced at around $70 and the two's r us links are around $80 for both the front and the rear.
Also I agree your supra spoiler was a good buy and it suits the cars look very well at the moment. Once you put sideskirts on I think you should get the SS-III Raiser blocks. Is that you in the pic with crazy spikey hair the asain dude??
This post has been edited by BonzaiCelica: Nov 11, 2010 - 4:40 AM
Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514
They're actually $60. I've bought them.
taking too long to mod since '09June '12 COTM'95 AT200
>
that's my little brother. but my hairs pretty similar. ahha and where is a good site for spacers?
QUOTE (BonzaiCelica @ Nov 11, 2010 - 4:40 AM) 
>nice rims I give them a
Those rims have a offset of +42 thats why they looked sucked in. I would recommend getting some 10 mm spacers front and back, but they will cost you around $220. I see that you have listed racing beat end links, remember those only come for the rears. They are priced at around $70 and the two's r us links are around $80 for both the front and the rear.
Also I agree your supra spoiler was a good buy and it suits the cars look very well at the moment. Once you put sideskirts on I think you should get the SS-III Raiser blocks. Is that you in the pic with crazy spikey hair the asain dude??
Those rims have a offset of +42 thats why they looked sucked in. I would recommend getting some 10 mm spacers front and back, but they will cost you around $220. I see that you have listed racing beat end links, remember those only come for the rears. They are priced at around $70 and the two's r us links are around $80 for both the front and the rear.
Also I agree your supra spoiler was a good buy and it suits the cars look very well at the moment. Once you put sideskirts on I think you should get the SS-III Raiser blocks. Is that you in the pic with crazy spikey hair the asain dude??
that's my little brother. but my hairs pretty similar. ahha and where is a good site for spacers?
There are 4 types of different spacers. Mine are the best you can buy and the most durable. Mine came with extended studs, they are called hubcentric wheel spacers is what you want to look for. check out the post in the wheel offset guide there is a link there well never mind here is the link between different wheel spacers.
Read up : http://www.6gc.net/forums/index.php?showtopic=76427&st=0
This post has been edited by BonzaiCelica: Nov 11, 2010 - 3:28 PM
Read up : http://www.6gc.net/forums/index.php?showtopic=76427&st=0
This post has been edited by BonzaiCelica: Nov 11, 2010 - 3:28 PM
Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514
No man, not $60 spacers. They'd probably be made of acrylic or something for that price LOL. I got my Racing Beat Miata rear endlinks for $60.
taking too long to mod since '09June '12 COTM'95 AT200
I like your Celi. Those rims looks awesome!
https://t.me/pump_upp
>
ya right! they are somewhat light, weighing in at only 17lbs
QUOTE (Sebby @ Nov 11, 2010 - 4:43 PM)
>I like your Celi. Those rims looks awesome!
ya right! they are somewhat light, weighing in at only 17lbs
Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514
need help! im thinking about getting these hellaflush spacers. http://fatlace.3dcartstores.com/WPN-R-x-HE...20mm_p_525.html
im running 17x7 rims with a +42 offset and want it to sit flush. my car is dropped on megan coils with 205/40/17. im thinking about a 15mm or 20mm spacer. which would you guys recommend? id rather not roll my fenders but if i have to ill take it to a shop to do that too. so if i wanted this itd be the 54.1 x 15mm with 5x100 correct?
im running 17x7 rims with a +42 offset and want it to sit flush. my car is dropped on megan coils with 205/40/17. im thinking about a 15mm or 20mm spacer. which would you guys recommend? id rather not roll my fenders but if i have to ill take it to a shop to do that too. so if i wanted this itd be the 54.1 x 15mm with 5x100 correct?
10 -8
On your 17x7, +42mm wheels, hellaflush would be +10mm front, -8mm rear
So 32mm spacer for front, 50mm spacer rear
Sorry to say, but that will MURDER your wheel bearings.
So if you truly want hellaflush, get wider wheels with better offsets. But to sit just more functionally flush, I'd say do 15mm upfront and 20 or 25 mm for rear
This post has been edited by HectortheRican: Nov 14, 2010 - 8:48 PM
On your 17x7, +42mm wheels, hellaflush would be +10mm front, -8mm rear
So 32mm spacer for front, 50mm spacer rear
Sorry to say, but that will MURDER your wheel bearings.
So if you truly want hellaflush, get wider wheels with better offsets. But to sit just more functionally flush, I'd say do 15mm upfront and 20 or 25 mm for rear
This post has been edited by HectortheRican: Nov 14, 2010 - 8:48 PM
taking too long to mod since '09June '12 COTM'95 AT200
im trying to say that the spacers are made BY hellaflush. they just released spacers. the link up there are spacers with the brand HELLAFLUSH. im not going hellaflush with my car. lol. 15mm front and 20mm rear sounds perfect. thanks! and the hub centric ring for it would be 54.1 x 15mm right? also, will i be needing extended lugs?
This post has been edited by sunwukongg: Nov 14, 2010 - 9:39 PM
This post has been edited by sunwukongg: Nov 14, 2010 - 9:39 PM
>
Lol! Hector needs to learn to read better. And I'm pretty sure that for anything higher than 10mm, you'll need extended lugs. I know the hub is 54.1, I've never seen anything on the 2nd dimension. I'm guess that has to do with the spacer?
QUOTE (sunwukongg @ Nov 14, 2010 - 8:37 PM)
>im trying to say that the spacers are made BY hellaflush. they just released spacers. the link up there are spacers with the brand HELLAFLUSH. im not going hellaflush with my car. lol. 15mm front and 20mm rear sounds perfect. thanks! and the hub centric ring for it would be 54.1 x 15mm right? also, will i be needing extended lugs?
Lol! Hector needs to learn to read better. And I'm pretty sure that for anything higher than 10mm, you'll need extended lugs. I know the hub is 54.1, I've never seen anything on the 2nd dimension. I'm guess that has to do with the spacer?
taking too long to mod since '09June '12 COTM'95 AT200
lol. sunwukongg thinks hector needs to stop talking in 3rd person too.
spacers is no longer important to my list. things i gotta do right now are:
1.jdm tails
2.drop moar on the megans
3. alignment + camber bolts..
This post has been edited by sunwukongg: Nov 18, 2010 - 4:37 PM
spacers is no longer important to my list. things i gotta do right now are:
1.jdm tails
2.drop moar on the megans
3. alignment + camber bolts..
This post has been edited by sunwukongg: Nov 18, 2010 - 4:37 PM
And manual transmission swap!
2006 BMW 330i - 6 Speed - Dinan Stage 12014 Toyota Rav4 XLE
>
thats the final step. but i think ill do that along with an engine swap. my cars at 193xxx miles right now haha also just purchased jdm tails from shegarhuney yesterday
This post has been edited by sunwukongg: Nov 18, 2010 - 4:39 PM
QUOTE (mak5603 @ Nov 18, 2010 - 2:59 PM)
>And manual transmission swap!
thats the final step. but i think ill do that along with an engine swap. my cars at 193xxx miles right now haha also just purchased jdm tails from shegarhuney yesterday
This post has been edited by sunwukongg: Nov 18, 2010 - 4:39 PM
>
Nice!!! Within 3 months, there's been like 4 members that acquired JDM tails. Now you too! It'll look great xD
QUOTE (sunwukongg @ Nov 18, 2010 - 4:36 PM)
>thats the final step. but i think ill do that along with an engine swap. my cars at 193xxx miles right now haha also just purchased jdm tails from shegarhuney yesterday
Nice!!! Within 3 months, there's been like 4 members that acquired JDM tails. Now you too! It'll look great xD
taking too long to mod since '09June '12 COTM'95 AT200
>
yep..jdm tails + white celica = beautiFLOW....get it..cause it flows together...nvm..that was pretty lame.
QUOTE (HectortheRican @ Nov 18, 2010 - 4:46 PM)
>>
Nice!!! Within 3 months, there's been like 4 members that acquired JDM tails. Now you too! It'll look great xD
QUOTE (sunwukongg @ Nov 18, 2010 - 4:36 PM)
>thats the final step. but i think ill do that along with an engine swap. my cars at 193xxx miles right now haha also just purchased jdm tails from shegarhuney yesterday
Nice!!! Within 3 months, there's been like 4 members that acquired JDM tails. Now you too! It'll look great xD
yep..jdm tails + white celica = beautiFLOW....get it..cause it flows together...nvm..that was pretty lame.
double post. sorry
This post has been edited by sunwukongg: Nov 25, 2010 - 2:51 AM
This post has been edited by sunwukongg: Nov 25, 2010 - 2:51 AM
>
Nah nah, I like it. Then when you get your spacers, you'll be beautiFLUSH!
QUOTE (sunwukongg @ Nov 18, 2010 - 4:51 PM)
>yep..jdm tails + white celica = beautiFLOW....get it..cause it flows together...nvm..that was pretty lame. ill try that again when its more appropriate.
Nah nah, I like it. Then when you get your spacers, you'll be beautiFLUSH!
taking too long to mod since '09June '12 COTM'95 AT200
jdm tails and some stickers on now.. cars been REALLY dirty due to major winds and rain..sorry
This post has been edited by sunwukongg: Nov 29, 2010 - 4:25 PM
This post has been edited by sunwukongg: Nov 29, 2010 - 4:25 PM
not me next to the car. just my buddy.
This post has been edited by sunwukongg: Dec 3, 2010 - 11:40 AM
Got some maaadddddd camber bro! Lolol.
I hope to get either these coils or BC BR Type coils by January.
I hope to get either these coils or BC BR Type coils by January.
taking too long to mod since '09June '12 COTM'95 AT200
AMPM bro?!?!
2006 BMW 330i - 6 Speed - Dinan Stage 12014 Toyota Rav4 XLE
>
yep ampm haha
QUOTE (mak5603 @ Dec 3, 2010 - 1:49 PM)
>AMPM bro?!?!
yep ampm haha
like the hello kitty sticker
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
You best be out for foty!!!I wanna see this thing in person!
>
thanks haha the girlfriend put it there..
>
when is it and where?
QUOTE (njccmd2002 @ Dec 3, 2010 - 3:54 PM)
>like the hello kitty sticker
thanks haha the girlfriend put it there..
>
QUOTE (SupraKid @ Dec 3, 2010 - 4:18 PM)
>You best be out for foty!!!I wanna see this thing in person!
when is it and where?
Sometime at the late beginning of this year down in so-cal! Watch out for the thread which should be popping up in the next few months!
hope it's in april..i still wanna do more things with my car..