OK, so like it says I have put a lot of money into her and I have only had her a short time, so I will try to update you with what I have done already before I get to the good stuff....

So the first thing was my stereo out of my old car...

Alpine deck


Memphis marine 8's in the doors


Some MB Quart 6.5's in the rear, no pics...

A Rockford Fosgate P3 12 in a custom box


And everything was powered by a Earthquake 900 watt 5 channel amp with a Coustic XM3 crossover and 2, 1 farad Stinger caps, sorry for the ****ty pic, the bright blue LED's were messing with my camera...


And a bad ass alarm which shall remain nameless, but I will say that it has keyless entry, a 2 way pager, remote start, and remote trunk ...

Then a cold air intake...


Then the header...


Then full custom exhaust...






Then TRD quick shift kit and Vincent Doggy arm rest cover, e-brake boot, and shift boot...


Then blue gauges and clock...


Then a new windshield, but I don't have any pics for that...

Then tint...


Rear disc conversion (not installed yet)...


Then a new deck, the top of the line JVC KW-NX7000BT, it has everything, DVD, SD, HD radio, GPS, Bluetooth and Ipod, and you can program it to say whatever you want...



And today we started on the fun stuff!
First had to run 0 gauge wire to the back, the old 4 gauge wasn't going to do!!!


Then Stinger roadkill sound deadening material all over...


We are making a custom fiberglass enclosure to fit in the spare tire well...



And it is going to house the new Memphis CM 12, which is the replacement for the Mojo 12...


Its on the right, next to a normal sub...


And the new Memphis Hybrid amp, the replacement for the big Memphis Belle...





I can't wait!! This is top of the line equipment in a car that is done right by a Master Installer at my local car audio shop: Vibez performance and car audio!

I will keep updating this as my car gets more and more s**t!!!

This post has been edited by ChfNix: Nov 12, 2010 - 12:35 PM

You've done some really nice upgrades!
Were have you bought the header?

>
Thanks! I got it from 2Kracing.com...

sweet!

Ok, so I got some more updates!!

First here is the box with the top being installed...


Side view, check out the fiberglass!


Before anyone asks, yes it is strong, my installer was jumping up and down on the fiberglass the other day!!



Here is the crazy ass port that is 25" long in a box that is only 10" deep with 2.5 cubic feet of airspace!!



Next test fitting the sub, notice the second battery on the side!!


Next we coated the whole thing inside and out with rubberized undercoating to help with the sound...



I mounted a voltage gauge that keeps track of the primary battery, and a bass control knob for the amp in the pocket...

Excuse the dust, its been in the car audio shop for almost a week now...

So right now I have the amp and sub hooked up with out the secondary battery or the capacitors and I have severe voltage issues!!!

This is just temporary to see if the box sounds good, everything will be flush mounted and wrapped in black vinyl to make it look good!!


More to come on Monday, along with more parts from fanboy95!!

wow great project... spared no expense

wow man! awesome stuff! makes me pretty jealous! i wish i had some money ha

Ok, so the only thing I have gotten done was the pieces from Fanboy95, Rims and tires, front and rear Cusco strut braces, JDM tails, Wolfie308 third brake light, and 5th gen mirrors...

First the JDM tails, they are even more sexy in person!!


Next the clear third brake light...


Here are the rims, not my first choice, but they look better than the stock ones, and I got a good deal!!!



And the Cusco front strut brace...




More to come shortly, gotta get the mirrors painted, the rear disc conversion installed, and the vinyl flush panels installed in the rear...

we have the same rims... ASA... and JDM tails

you are crazy man!
will wait for more from you
cheers

Well it's the slow season at work right now so I don't have any extra money to spend, hopefully more to come soon...

Just got the custom blue and white climate control module from Pittfirefighter, can't wait to install it!!

Ok, it's been a while but I got a lot of new stuff to add!

First the blue with white indicators CC unit from pittfirefighter.



Then a dragon CC panel from bmj67.





So now all my lights are blue:



Next was a bunch of leds from superbrightleds.com.

Gauge LED:



Dome light:









Glove box light:








Hatch light:







Reverse lights:







License plate light:





Third brake light:







Removed amber lens from JDM tails:





Sylvania Silverstar signals:



Now for the rest of the stereo install.

With the yellow top and capacitors hooked up:



Now with flush panel wrapped in black vinyl to maintain the "stock" look:



I'm really happy with it, all the corners and curves came out good!





This post has been edited by ChfNix: Aug 19, 2010 - 10:06 PM

Holy **** that looks awesome

>
Thanks! I actually like your car a lot also! I want to go for the GT-Four look with this car but your car inspired to do a white SS-III vert for my next project!

How did you install the 3rd brake light? I'm thinking of doing the same soon

>
Do you mean the led or the whole light assembly?

>

The whole light assembly. I'd like to do LED as well, but I'm not too experienced with electronics so I can't handle a whole lot.

Its not hard, but I honestly don't remember, I got it about a year ago. I know you have to pop the plastic off from the underside of the hatch and remove some bolts or nuts. It's easy! As far as the led its just plug and play!

>

Sweet, thanks!

>

Here, I took it out the other day so I took some pics, When I got my clear third brake lens it came from another members car so it was already installed onto the housing.

First pull off the black plastic cover on the hatch.

Next remove these bolts, I think they were 12mm.



Here you can see the bolts, and the LED I used for my light. Once again it's just plug and play!



Here you can see the other two bolts that were hiding behind the Roadkill.



Take off the plate and you can see the two nuts holding the light assembly in place, I used a deep 10mm socket to get these off.



Here is the lens assembly.



It's really easy to do!

Ok, another update....

Fifth gen mirrors, JDM vent visors, moon roof visor, and Vince's hatch visor





I had to paint the vent visors because I broke one when I was scraping the old tape off....









GT-Four rear strut brace





TRD front strut brace



Clear "puddle light" covers







GT-Four floor mats

This was when I first got them, I shampooed them and they look like new now!





Found some black carpet at the junk yard!



It was kinda faded so I bought some dye and made it black again!









I guess I didn't take a pic of it completely finished....

I got some carpet padding to help cut down on road noise, I also got a bulk pack of Stinger Roadkill I'm putting down on the floor first...





This post has been edited by ChfNix: Sep 12, 2010 - 1:52 PM

I love the clear courtesy lights, but they're just not that high on my list right now lol

>

I really like them, at night with the LEDs in there they are really bright!

You do AWESOME mods. Good for you guy. Clean, sleek, OEM. Drop that sucker and the car won't need anything else except some ground effects.

>


Thanks! Both of those are on my list and Upscale just got some more of the Meagans in so hopefully that will be happening in the near future!

Where did you get all those LED lights for your license plate, cluster and dash controls?

>

Superbrightleds.com

>

Thanks! Will surely think about getting some!
Btw, where did you get your hand brake boot?

This post has been edited by dudeofchaos: Sep 15, 2010 - 10:08 PM

you should do a write up on how you did your speaker box and how you got everything to fit so well