Over 1M Posts • 84K Topics • 9K Authors

WTB 94 st spindle - 6G Celicas Forums

Topic #70101 10 posts Started by DaCCelica94
anyone have any parts cars that they can pull the drivers side spindle off? i will pay 75 plus shipping charges. i rly need this part. thx

This post has been edited by DaCCelica94: Oct 30, 2009 - 11:56 PM
can you be more specific what part your talking about? i got a 96 st part car.. with pretty much all parts still on it. let me know
i have a spindle off a corolla 97 that had the 7afe in it but not sure if it will work on a celica

yea your 3sgte is cool but ill stick to my 7agte
I have a whole hub assembly with bearing for $125 shipped. Let me know.
no on the spindles only the 94-99 celicas work. i cross refrenced bc i found a 97 corolla at the junk yard and was gonna get but they said it wont work.
do u still need this

if your like me and your wheel bearing is going you can get the bearing at discount auto parts for 28 dollars and the seals for another 20 then pay a shop to fress the old one out and put the new one in for around 30-50 dollars if u bring them your spindle

94 stx coupe, super mario kart beater87 toyota 2wd truck, rebuilding engine85 celica gt-s project
>
QUOTE (Joe_1985 @ Oct 26, 2009 - 1:37 AM) *
>do u still need this

if your like me and your wheel bearing is going you can get the bearing at discount auto parts for 28 dollars and the seals for another 20 then pay a shop to fress the old one out and put the new one in for around 30-50 dollars if u bring them your spindle


Well I bought a new wheel bearing and both seals and had my mechanic press them in but then when we got it all together we figured out that the spindle is warped as well from when the cv axle broke it spun around in the back of the spindle nd warped it. I had to buy a wheel bearing both seals brakes and rotors and a cv axle. If I put the warped spindle back on it'll cause everythin to break again
>
QUOTE (DaCCelica94 @ Oct 26, 2009 - 9:30 AM) *
>>
QUOTE (Joe_1985 @ Oct 26, 2009 - 1:37 AM) *
>do u still need this

if your like me and your wheel bearing is going you can get the bearing at discount auto parts for 28 dollars and the seals for another 20 then pay a shop to fress the old one out and put the new one in for around 30-50 dollars if u bring them your spindle


Well I bought a new wheel bearing and both seals and had my mechanic press them in but then when we got it all together we figured out that the spindle is warped as well from when the cv axle broke it spun around in the back of the spindle nd warped it. I had to buy a wheel bearing both seals brakes and rotors and a cv axle. If I put the warped spindle back on it'll cause everythin to break again



i have a spindle in my garadge, non abs driver, unknown milage, i used the studs outta it. i bought it because i thought my bearing was bad. it wasnt.

i was thinking of returning it but i remember you needed one so let me know if u need it asap. can ship monday or tues

94 stx coupe, super mario kart beater87 toyota 2wd truck, rebuilding engine85 celica gt-s project
thanks dude but already bought one. mods plz close