25mm ftw! Glad to see more and more celicas getting hooked up with spacers.
2006 BMW 330i - 6 Speed - Dinan Stage 12014 Toyota Rav4 XLE
2006 BMW 330i - 6 Speed - Dinan Stage 12014 Toyota Rav4 XLE
GreenDemon Celica progression thread - 6G Celicas Forums
2006 BMW 330i - 6 Speed - Dinan Stage 12014 Toyota Rav4 XLE
I just need to find someone with a fender roller that i can use for the rears, and then from there the coils will be adjusted lower he he
1996 Toyota Celica Project Mean Green3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <32001 Solar yellow Lexus IS3002001 Dodge ram 1500 Off-road edition
LUUUUCKY, thats going to look sick. I want coils bad.
2006 BMW 330i - 6 Speed - Dinan Stage 12014 Toyota Rav4 XLE
i love mine, ride is a little on the rough side, but with the swaybars the car handles like crazy
1996 Toyota Celica Project Mean Green3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <32001 Solar yellow Lexus IS3002001 Dodge ram 1500 Off-road edition
You should be able to rent them from a local shop,if not just use a rubber mallet and a heat gun, we did it on my buddies silvia and it worked great
-Protection mode, For when your amp tries to blow its load.1995 Toyota Celica GTS-Daily Driver1999 Chevy Cavalier-Winter Beater1994 Honda Civic CX Hatchback-DeadMy Celica!
Only issue with the mallet is remember when i got hit last year? they put some bondo in there, so slow and lots of heat would be the best option for me, im hoping that some of the local guys may have one
1996 Toyota Celica Project Mean Green3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <32001 Solar yellow Lexus IS3002001 Dodge ram 1500 Off-road edition
Oh yea, that may not be the best idea then.
-Protection mode, For when your amp tries to blow its load.1995 Toyota Celica GTS-Daily Driver1999 Chevy Cavalier-Winter Beater1994 Honda Civic CX Hatchback-DeadMy Celica!
Thought about it but i think one of my friends has an eastwood roller which will make it nice
1996 Toyota Celica Project Mean Green3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <32001 Solar yellow Lexus IS3002001 Dodge ram 1500 Off-road edition
Bondo is only going to "move" to a certain degree. It depends how much you put on but id be really weary about doing that as it may crack then ull have to sand that area down, rebondo and repaint..
Heat gun and mallet is a horrible way to "roll" fenders compared to using a roller, saying they are so damned cheap to rent.
This post has been edited by SupraKid: Feb 10, 2011 - 4:50 AM
Heat gun and mallet is a horrible way to "roll" fenders compared to using a roller, saying they are so damned cheap to rent.
This post has been edited by SupraKid: Feb 10, 2011 - 4:50 AM
I didnt put the bondo there, i was busy around the time i got hit and decided to pay someone else to fix it for me, but it looks like the bondo there is minimal, so what is there will hopefully stretch just a bit, and trying to figure out now if i can compress the front anymore... but i cant wait for the spacers to get here they shipped yesterday, but it may be a little while before they go on, i still have to find a day im off work and the wife will stop nagging me
1996 Toyota Celica Project Mean Green3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <32001 Solar yellow Lexus IS3002001 Dodge ram 1500 Off-road edition
^ Wait what your married?!?
[b]My Build Thread|Flickr|My Blog
Might as well be
1996 Toyota Celica Project Mean Green3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <32001 Solar yellow Lexus IS3002001 Dodge ram 1500 Off-road edition
Gf problems Kyle? It's common knowledge that if your under 30 you can't have a nice celica and girl at the same time.
Women are always the problem.... besides brakes, took me and a friend about 5 hours to put on the disc swap, and there is a way to replace the cables without actually removing part of your exhaust, but the main issue was not being able to fit the disc over the brake pads for the internal parking brake, pretty sure i had everything on there right, as far as the springs go, but it wouldnt slide on, ended up filing down the pads to get the rotor to slide over
1996 Toyota Celica Project Mean Green3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <32001 Solar yellow Lexus IS3002001 Dodge ram 1500 Off-road edition
if the disc wasn't going over your pads, that means something really isnt adjusted right...
my left rear ebrake partially locked on me, and I was still able to get the disc on and off with no problem.
my left rear ebrake partially locked on me, and I was still able to get the disc on and off with no problem.
Kyle, there is a star adjuster you should have adjusted to get the rotor to slide on, its how you adjust the parking brake once the rotor is on.You use a screwdriver and spin the teeth clock wise or counterclockwise,which spins the cylinder over a threaded cylinder and lengthens or shortens, it sits between the bottom of the 2 pads.
It was weird, yeah i know about the star adjuster and it was all the way tucked all the way in and there was slack on the ebrake cable, it was definately odd,
Anyway i beat the rotor on with a deadblow and drove it till it loosened up lol, i was going on hour #8 of the install and was getting short tempered, but its all good now
Oh and the spacers are here, but i need to roll my rears, which will hopefully be done next tuesday and then the spacers will go on, and i will be going lower, then once the weather breaks for good the splitters are going back on.... still debating on the blacktop or silvertop swap though, it may happen..... but then again it may not i need to buy a truck for work so there may go that money
Anyway i beat the rotor on with a deadblow and drove it till it loosened up lol, i was going on hour #8 of the install and was getting short tempered, but its all good now
Oh and the spacers are here, but i need to roll my rears, which will hopefully be done next tuesday and then the spacers will go on, and i will be going lower, then once the weather breaks for good the splitters are going back on.... still debating on the blacktop or silvertop swap though, it may happen..... but then again it may not i need to buy a truck for work so there may go that money
1996 Toyota Celica Project Mean Green3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <32001 Solar yellow Lexus IS3002001 Dodge ram 1500 Off-road edition
So, decided to fit the spacers today, the rear still needs to be rolled but that will be done soon hopefully.... here are some teaser pics of my dirty ass car and garage
1996 Toyota Celica Project Mean Green3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <32001 Solar yellow Lexus IS3002001 Dodge ram 1500 Off-road edition
Mmmmm nice....
Gaw, I don't know whether i wanna get spacers or S/T sways now.
Gaw, I don't know whether i wanna get spacers or S/T sways now.
taking too long to mod since '09June '12 COTM'95 AT200
He he i have both..... get sways, everyone else can see rims, but you can feel the difference in the sways, personally i would pick sways over stance any day of the week
1996 Toyota Celica Project Mean Green3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <32001 Solar yellow Lexus IS3002001 Dodge ram 1500 Off-road edition
Hmm... well I DO have a kickass road to have some fun on over here... (4,000 feet to the top, loads of fun on the way down. Perfect mountain/scenic/togue road)
taking too long to mod since '09June '12 COTM'95 AT200
Yeah i really need to roll these fenders
1996 Toyota Celica Project Mean Green3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <32001 Solar yellow Lexus IS3002001 Dodge ram 1500 Off-road edition
I'd vote sways hector. Damn, for some reason i dont like it 
...idk maybe its just the pictures but im putting my 7th gens up FS...
...idk maybe its just the pictures but im putting my 7th gens up FS...
Problem is it needs to be lower, im adjusting the coils once i have the rear rolled or i will destroy my back quarters and tires
1996 Toyota Celica Project Mean Green3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <32001 Solar yellow Lexus IS3002001 Dodge ram 1500 Off-road edition
sways > spacers
Wheels loos good.
Wheels loos good.
[b]My Build Thread|Flickr|My Blog
>
Roll the fenders and a tad bit more neg camber on all 4 corners. Just a wee bit. You'll be dropping panties everywhere.
QUOTE (96stgreendemon @ Mar 1, 2011 - 7:41 AM) 
>Problem is it needs to be lower, im adjusting the coils once i have the rear rolled or i will destroy my back quarters and tires
Roll the fenders and a tad bit more neg camber on all 4 corners. Just a wee bit. You'll be dropping panties everywhere.
taking too long to mod since '09June '12 COTM'95 AT200
did you have to extend your studs? or is there enough thread? looks reallly good bro
st205 powered ss3 coupe
i bought the bolt on spacers, not really a fan of the extended studs, makes me nervous for some reason
1996 Toyota Celica Project Mean Green3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <32001 Solar yellow Lexus IS3002001 Dodge ram 1500 Off-road edition
>
ahh ok, thats a good idea tho.
QUOTE (96stgreendemon @ Mar 2, 2011 - 10:11 AM)
>i bought the bolt on spacers, not really a fan of the extended studs, makes me nervous for some reason
ahh ok, thats a good idea tho.
st205 powered ss3 coupe
Soooo today i got tired of waiting on dude with a fender roller so went to work with a mallet, and it turned out really well actually, so the spacers are on and she got a little more of a drop, right around 15mm, more pics tomorrow when she is clean
1996 Toyota Celica Project Mean Green3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <32001 Solar yellow Lexus IS3002001 Dodge ram 1500 Off-road edition