Hi!... Anyone knows wich rear mount i have to use to put a 3SGE gearbox into a 97 GT?... The other three mounts works just pefectly but the rear mount dosnt
3SGE GEARBOX MOUNT - 6G Celicas Forums
The 3sge tranny is the s54 , same as the gt.
mounts are the same.
mounts are the same.
Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered
>
you have to align the tranny first. you might have to fit the rear first and then the rest. Also what other three fit are you talking about there are only 3 on the tranny side. The other is the engine mount that you don't need to worry about.
This post has been edited by trdproven: Oct 19, 2009 - 5:00 PM
>The 3sge tranny is the s54 , same as the gt.
mounts are the same.
mounts are the same.
you have to align the tranny first. you might have to fit the rear first and then the rest. Also what other three fit are you talking about there are only 3 on the tranny side. The other is the engine mount that you don't need to worry about.
This post has been edited by trdproven: Oct 19, 2009 - 5:00 PM
94 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi||Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto||Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr804 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy|89 Supra (Sold)90 Supra (Sold)
far as I know only the 94 SS-II 3S-GE with superstrut came with the E56, or otherwise it was a rare option in SS-II/III
ST202 SS-II CELICA threadNew Zealand members check inSticky thread's: How to contribute and troubleshoot.
Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered
yup, but also has a gearbox external oil cooler
ST202 SS-II CELICA threadNew Zealand members check inSticky thread's: How to contribute and troubleshoot.
Hi 6GC friends!... Ill try to put the rear mount this weekend without any good results!.... The rear mount don´t fit
... The mount its too far from the bracket 
Here ill post some pic! (the left bracket its the bracket from de rear 3SGE box and the other one its the brackets from my stock gearbox from a 3SFE).
Wath i can do? any ideas?
Here ill post some pic! (the left bracket its the bracket from de rear 3SGE box and the other one its the brackets from my stock gearbox from a 3SFE).
Wath i can do? any ideas?
ST202 SS-II CELICA threadNew Zealand members check inSticky thread's: How to contribute and troubleshoot.
hmm there are 3 to use, if you click my above link you'll see your 2 brackets in the picture, are the same as your picture. tried using your old bracket does that fit?
12321-74320
12321-74321
12321-74340
12321-74320
12321-74321
12321-74340
ST202 SS-II CELICA threadNew Zealand members check inSticky thread's: How to contribute and troubleshoot.
no, my old bracket dosnt fit!.. i already get the solution to the problem improving a custom rear mount
i found that my gearbox its an E58!.. Now i have some problems with the axles!
any idea on what axles will fit up?


