SOLD

Hi everyone, I am selling the stuff I was planning to put into my car. These parts are suitable for Currens and Celicas (ST202/206 3S-GE)

Corner caps, leads and exhaust are sold- just the Struts left!

Curren corner caps NZ$100 - Sold
Metallic blue, and difficult to find. So far as I know these will also fit onto Celicas?



One needs TLC as it has a crack and other minor damage. It has two small holes, one being a piece about the size of a 20c piece which is included- I’m assuming this can be plastic welded or filled in?



TRD Ignition leads - NZ$200 - Sold
5mm, Red, unused in box. TRD part number 19051-ST000 for 3S-GE engines.



TRD muffler - NZ$150
This is a TRD muffler for a Celica ST202, which I purchased a while back. It has TRD embossed on one side and the genuine TRD plate on the other with the part number: 17400-ST000. You cannot buy this from TRD any more as it has been discontinued

The inlet is 2.25 inch/ 60mm, and the outlet is 3.75 inch/ 95mm.



Please note it will need to be welded on as a previous owner cut the pipe off, but there is still a collar that the exhaust pipe can be welded to. The muffler's in pretty good shape - no dents and the mounting brackets are still attached. It just needs a bit of a clean up, and with a bit of a sand and polish it should come up great.

TRD Adjustable Struts & Springs - NZ$800
Adjustable TRD suspension for superstrut Celicas and Currens. This came with my car when I bought it five years ago, and from then they’ve been boxed up and taking up space, unused as it required too much effort to turn them into pogo sticks. lol

These lowered the car considerably from stock, and cost heaps to buy new- was very unreliably informed that they retailed for around NZ$6k?



Part numbers on them are:
Front struts are 48508-ST060 (GH-09 KYB),
Front springs are 48231-SP000-06

Rear struts are 48021-ST070 (G1-07 KYB)
Rear springs are 48131-SP000-08

They appear to be in pretty good condition- there are no leaks, dents or buckling that I can see, and the ball joints on the sides of the rear suspension look pretty good- no cracking in the rubber, they move around firmly without any crunching or slackness.

I am based in New Zealand so I figure overseas shipping makes them somewhat expensive, but if you pay for the shipping, I am willing to do so, and am getting quotes now.

Let me know if you have any queries- thanks everyone!

This post has been edited by Sick_Puppy: Feb 1, 2010 - 6:58 AM

Curren corner caps NZ$100
Metallic blue, and difficult to find. So far as I know these will also fit onto Celicas?



Thats front or rear? sure out of Curren

If for rear, I am interest

>

damn beat me too it, yea they look like they are for the rear vince

Hey there, these are the rear caps for the Curren... If you like I can price them for you, although shipping to HK could be somewhat expensive?

>

Check the shipping for me, I think the shipping might be even cheaper... since we are closer
Do u have a pics that the rear caps on a curren bumper?
wanna check out the fitting, but if u sure those are remove from a Curren, then would be alright.
Paypal ready or u can have any of stuffs for trade if interested.

Thanks in advance!!
Vince

I'm interested in the exhaust, do you know if the hangars fit exactly on an USDM Celica GT? also can I get more pics from the tip side via pm? first dibs if I can.

>TBH I don't know- does the GT model in the states have a 3S-GE engine? It's been a while since I've been on a non-NZ forum- between marriage, work and study I haven't had much spare time! lol

Only thing I can suggest is measure the mounting points on your model, or ask around? Otherwise you could modify them I guess... shipping could be a killer though! Wil measure up, take pics and get back to ya

Cheers!

>

vince, you need to fiberglass those puppies and send them to the u.s.

>

not too concerned about what engine as long as the hangers would mount the exhaust. Can anyone verify the hangers are like st204?

>

You just need skills to reweld the pipe, or pay someone to weld for ya...


Hey puppy, have my quote yet?

>
Reason I asked re: engine is that I have no idea whether US celicas are US-built or not- if they are it could mean that they have different connectors and mounting points for everything (incl. exhaust) to cater for US parts- I dunno, I don't build 'em! lol If your car has a 3S-GE engine, it would indicate whether they are similar or the same, and answer your question. the mounting points are intact, so I imagine it could be mounted. I just have to pack it back into the box, and I can get a shipping price for you!

>
Not yet- I had a look at the box they came in, and erm, it was crap- Getting a new box so it will survive a trip to HK, and will havea price for you within the next day or so. Apologies for the delay!

As long as u reserve for me is fine!!

2nd dibs on exhaust if trdproven does not go for it

Sweet- still trying to box them properly- had to go into work today rather than take care of 'business' lol

Anyhoo, will have prices ASAP, in meantime:
* TRD Proven has first dibs on exhaust followed by 25th Celica
* Vincent gets first dibs on caps followed by Freddy. Leads are under offer elsewhere.

I've also edited thread to remove the NZ only stipulation- since I've had more interest from overseas than in NZ, I figure 'NZ only' is a bit moot! lol

This post has been edited by Sick_Puppy: Nov 1, 2009 - 2:43 AM

im interested in the TRD struts........ they look to be height adjustable? are they also adjustable for dampening ? also please check what shipping would be to 80602 USA please. thanks

>
Will do- only problem (aside from cost of shipping) will be finding strong enough packaging! Had an idea though- cycle shops use double skinned boxes- plenty strong!

>


ok sounds good, also please let me know if they have dampening adjustments and height adjustments (looks like they are height adjustable)

if he doesnt want the trds i do shipping to 02136 please

>


hey ive got GAB's on my car right now (superstrut) i can sell you if i pick these up 5 way adjustable but not height adjustable

>

k always good to have extrats im runninig ksports right now

>
Heya, the suspension has four settings on a dial- this is the dampening, yes? The dials are on the top for the front and the sides for the rear.

As for height adjustment, it's got a massive thread for the lowest point of the spring. I'm assuming this can be adjusted, however perhaps the spring would need to be changed? I will check with a few people in the know here and get back to you. Otherwise the only thing Ican suggest is that you check the model numbers provided in the TRD website?

no that answers my questions, and i would like the best price shipped and we can go from there, if the price isnt what i like, then looks like pipes will buy them as a backup. thanks!

If things fall through with the Curren Splitters, I want them. let me know.

Hey guys, I'm getting quotes for these now- I'm not using Fedex as a) it's for stuff that needs to be there tomorrow, and b) it is HELLISHLY expensive! lol

Apologies for the delay- I've had a new arrival last week (a Mini-me without the cloning!), and life's been chaos lately!

Those that wanted this gear, if you're still game, get back to me via PM with your contact details (name, address etc, and phone/ MSN/ Skype is possible, just in case), and we'll sort things from there. Cheers!



This post has been edited by Sick_Puppy: Nov 29, 2009 - 9:32 PM

just wanted to add some info sick_puppy

The TRD suspension are for SS-III suspension just so you know (wont fit GT4)

and they are height adjustable and dampening (4clicks)

im interested in the caps if "all of the above" fall through. otherwise, Vincent... Please make us some replicas... would be an awesome package deal with the spoilers...

>

so the SS-III superstrut is different than the GT4 superstrut?
got a link explaining the differences?

>


http://www.trdparts.jp/english/list_st-celica.html

Different Part No., the height is different and can't be interchangeable

Rusty and Vincent Doggy- thanks guys! I'd just clicked in and seen the enquiries re: differences, and was about to post a link about that...

By SSIII, they are Superstrut suspension, which from memory was used as it had more responsive steering... I think they were used on SSII as well- I have a Curren ZS Sport which I think came out at the same time as SSII's with similar options. Mine had a mild body kit... there was a more out there version of the kit available as an option, but was seen more often on the SSIII Celicas...

Ooh, and I have pics- not my car, pics of the caps attached, and a few other bits and bobs...

This post has been edited by Sick_Puppy: Nov 30, 2009 - 5:52 PM

These are the same caps on another car- it took me a loooong time to source the set I have- wish I was able to put them on, but since I'm selling the car...


Not quite so qure about these- I have a lip on mine that I prefer (although it's broken- Grrr!), but with the kit I have, these would have been better on the back...


This is from the User guide I have for the car, and some of the optional extras that could have been purchased at the time... oh, if only!

This post has been edited by Sick_Puppy: Nov 30, 2009 - 6:11 PM