is there a how-to remove carpet and trim pieces in the car? trying to get the pieces out like the ac climate unit, but don't know how....all screws pulled out...need the carpet pull out...any help with pics?

PM me. I just replaced the carpet. Can help you.

>

your from fresno?? sweet.. the carpet is easy but time consuming. gotta take the center console out. then the seats. then the door floor panels on the left and right. and i know im missing something but cant remember..

This post has been edited by benzo: Nov 9, 2009 - 10:52 PM

>

i don't have any pics at the moment but there are two cables that run out the back of the unit that need to be unclipped... one is blue and goes to an area right near the drivers (left hand drive) right foot, the other is black and goes into the engine bay right at the firewall... if you trace the coolant lines from the head, it runs straight into the black cable... you need to unclip both of them...

oh and you don't need to take that out to remove your carpeting... remove seats, back lower seats, center console w/ armrest, side door runners, lower quarter panels (beneath fuse box and glove box)... that should take care of it if memory serves me right

EDIT: drivers side stomp pad

This post has been edited by pittfirefighter: Nov 7, 2009 - 2:52 PM

thanks...the carpet is out.... but i want to remove the ac unit climate control....the black wire is a pain in the a$$...any suggestion to help to me get started? do i need to take off the boot (white tube where the black wire goes through) ALSO I WAS TRYING TO CHANGE MY SHIFTER TO A SHORT SHIFTER. ANY IDEAS TO TAKE OUT THE ORIGINAL SHIFTER????

This post has been edited by shai: Nov 7, 2009 - 4:45 PM

wow i just posted all of this info... let me grab the link

http://www.6gc.net/forums/index.php?showtopic=70460

with the AC control... its not tough... you must be doing it wrong... you have to go to the ENGINE side of the firewall.. under the hood is where it is clipped... against the firewall... all the way near the center of the car under the windshield... you will see it poking through... leave the white tube alone

This post has been edited by pittfirefighter: Nov 7, 2009 - 4:58 PM

got it...thanks.....me and my brother are trying things out...ill keep you posted on how it went...thanks for your help.

don't need to remove door panels to remove carpet.

>
what are those things called? the door FLOOR panels?

kick plates
or
door seals
or
kick plates

I see correction those are door sills, he does not mean the door panels.

This post has been edited by trdproven: Nov 10, 2009 - 6:43 AM

I had removed my carpet to pull the sound deadening, pics here

http://s358.photobucket.com/albums/oo23/nz...dening_removal/

In no particular order, but may help. I just removed everything I could see that was in the way and just remembered what it was, then put it back together in the reverse order that I pulled it

Im doing this tomorrow. Im gonna remove seats, kick panels, any other garnish/trim, then the carpet. Shouldnt be that hard to do really. Depending on how long it takes, I can do a quick write up (w/pics) if anyone wants....