hi all, this is a question for everyone who has done a gt4 conversion on a ST202, i was just wondering which method you have found best for attaching the front bumpers top two bolts. pics please if you have them.
GT4 conversions - 6G Celicas Forums
i think malpaso used brackets that held up the center and azn advanced used bolt and nuts.
94 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi||Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto||Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr804 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy|89 Supra (Sold)90 Supra (Sold)
Look at the sticky on this. It has pictures that should help you alot! Also put some ppictures up.
yeah read the sticky,
just wondering what other people have done instead.
just wondering what other people have done instead.
I cut out the st202 support and welded the st205 support in.
JDM ST205
>
same here. The support for the bumper is about $50US from a dealer.
QUOTE (nsxtypeR @ Nov 19, 2009 - 5:59 PM) 
>I cut out the st202 support and welded the st205 support in.
same here. The support for the bumper is about $50US from a dealer.
my st205 swapandour Beams swap
just tried using longer bolts and the bonnet lines up perfectly so i think thats the route i am gonna go with, i may make a spacer for them as well just for more support, the rest of the bolts and clips line up and fit no problem.
pics 
My Celica Pictures
will post pics tomo!
Cool 
Do you live over Wyre somewhere? I'm sure i passed you on Shard bridge.....?
Do you live over Wyre somewhere? I'm sure i passed you on Shard bridge.....?
-LukeMy Flickr
yep, you could well have done but not used the celica for 2 weeks now so if its recent then it was an imposter!!
ok so all bolted on apart from 1 bolt, the small one on drivers side (uk) near headlight does not line up, anybody else had this problem? everything else lines up fine.
Ok bumper is nearly fitted!
as you can see not a bad fit at all the bonnet/bumper seal linesd up nicely apart from the drivers side where there is a bolt missing at the moment. i still have to bolt it to the wings either side and the trays underneath need to be bolted back on but apart from that its fitted. just need to get everything sprayed now.
as you can see not a bad fit at all the bonnet/bumper seal linesd up nicely apart from the drivers side where there is a bolt missing at the moment. i still have to bolt it to the wings either side and the trays underneath need to be bolted back on but apart from that its fitted. just need to get everything sprayed now.
Looks Great!
looks real good!
Very nice.
'97 ST\ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+[sold 10/18]'93 MX-5LE