I have been searching away and either I'm missing every post regarding this or it hasn't been talked about in a while. What I'm wondering is what are the stock flange types for the 3SGTE CT26 turbos. From what it looks like, I have guessed the single entry is a T-28 and the dual entry is a T4. How far off am I? Thanks!

>
they are propriatary to toyota.
baktasht has just come out with a great line of turbos that bolt to the stock 3sgte manifold, tho.

OK, a little more about my situation. I have a CT26 single entry from a Supra and a 5SFE. I was wondering if I got a T-28 manifold if the single entry would hook up. I guess not. I'll check out what options baktasht has to offer. Thanks.

its easy to get ahold of adapters to go from the td04e (ct26) to a t3/t3 or t25 and so on...

Anyone know where to get a twin entry to a single entry adapter for the CT26?

>

what r u trying to do? ..

all the ct26 and ct20b's are a CT26 flange, not a t28, or t4 flange. its propriatery toyota flange. if you want to use a 3s-gte manifold with any other turbo you need a ct26 to XX turbo adapter. or if you want to use a ct26/ct20b with an aftermarket exhaust mani, such as a t3/t4, you need a t3/t4 to ct26 adapter.


This post has been edited by Mstoochn: Dec 20, 2009 - 5:22 PM