Over 1M Posts • 84K Topics • 9K Authors

Home > Topic #71229

can anyone tell me where to get these headlights? - 6G Celicas Forums

Topic #71229 36 posts Started by ajmorris1977
ajmorris1977
#1
i finally found a pic online of the headlight i want for my vert, can anyone tell me where to find them or what they are called, better still can they be made???? going to make custom projectors if i can find these.... help!

You're here for a good time, not a long time. - Colin McRaeWhen in doubt... Flat out! - Colin McRaeUndersteer is when you hit the wall with the front of the car.Oversteer is when you hit the wall with the rear of the car.Horsepower is how fast you hit the wall.Torque is how far you take the wall with you....
whatthe
#2
This is the first time ive seen this. And i really am interested too!
[b]My Build Thread|Flickr|My Blog
AMCMoe
#3
They aren't headlights, they're plastic covers that go over the headlights...and makes it more aerodynamic. Not easy to find but a set comes up for sale every now and then on ebay.co.uk.

Edit: http://www.aero-eurou.com/product/toyota/celica_gt4.html you can try contacting them, but I don't know if they bought the rights to make them from Forgmann or not...

This post has been edited by AMCMoe: Dec 19, 2009 - 9:46 PM
96bluevert
#4
Kind of looks like an SC300/400.....
"A true car enthusiast can see the potential in any car"QUOTE (njccmd2002 @ Oct 3, 2008 - 2:01 PM)i rather be a slow turtle in risk of extinction, than a fast locust, that you can see everywhere and need to be terminated.
samir0189
#5
i also thought it looks very lexus. But thats not a bad thing... biggrin.gif
◊◊◊My F/S Thread!◊◊◊QUOTE(14:19:21) Daniel: That was a JDM hole in the side of the box too. There was so much JDM trapped inside that box that they couldn't contain it, so they had to put a JDM hole in the box to let the JDM out.QUOTEFerdi says (11:29)No, it looks like a hooker put her acid vag on your hood. Acid vag = bigger problem than a few dings.
lilgreenyoda
#6
If you find someone who makes 'em, you should see if you can organize a group buy. Id be all over that.
ajmorris1977
#7
>
QUOTE (AMCMoe @ Dec 19, 2009 - 10:35 PM) *
>They aren't headlights, they're plastic covers that go over the headlights...and makes it more aerodynamic. Not easy to find but a set comes up for sale every now and then on ebay.co.uk.

Edit: http://www.aero-eurou.com/product/toyota/celica_gt4.html you can try contacting them, but I don't know if they bought the rights to make them from Forgmann or not...


i followed the like here and the pic is right but the site is very odd, i don't understand anything on it....
You're here for a good time, not a long time. - Colin McRaeWhen in doubt... Flat out! - Colin McRaeUndersteer is when you hit the wall with the front of the car.Oversteer is when you hit the wall with the rear of the car.Horsepower is how fast you hit the wall.Torque is how far you take the wall with you....
BloodyStupidDave...
#8
Wasn't there someone on here just last week planning to make something almost identical?
DaveyItems for sale
ajmorris1977
#9
>
QUOTE (BloodyStupidDavey @ Dec 20, 2009 - 12:38 PM) *
>Wasn't there someone on here just last week planning to make something almost identical?


yes, that was me
You're here for a good time, not a long time. - Colin McRaeWhen in doubt... Flat out! - Colin McRaeUndersteer is when you hit the wall with the front of the car.Oversteer is when you hit the wall with the rear of the car.Horsepower is how fast you hit the wall.Torque is how far you take the wall with you....
SwissFerdi
#10
Davey, I think you might be thinking of the clear lens group buy? Not the same thing, since those would replace the stock lenses. I'd love something like these, since the front looks awkward at some angles due to the headlights. However, I think it would be nicer if the headlights themselves could be brought flush with the bumper, since having a lens over the headlights themselves might look a little weird.
'97 ST\ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+[sold 10/18]'93 MX-5LE
richee3
#11


Lenses over the headlights kinda seems Datsun-esque to me. If you guys like it, it might have potential. Smoked lenses right there may not look too bad, and easily removable if a cop ever gives you flak.
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us touse the search button!2006 Aston Martin V8 Vantage.1998 Celica GT-BEAMSSwapped.2022 4Runner TRD Off Road Prenium.2021 GMC Sierra AT4.
BloodyStupidDave...
#12
>
QUOTE (ajmorris1977 @ Dec 20, 2009 - 6:20 PM) *
>yes, that was me


Ah. Well, looks like there is quite a lot if interestet if you can find someone to make them.
DaveyItems for sale
BloodyStupidDave...
#13
>
QUOTE (SwissFerdi @ Dec 20, 2009 - 6:23 PM) *
>I think it would be nicer if the headlights themselves could be brought flush with the bumper, since having a lens over the headlights themselves might look a little weird.


I think that would be quite difficult to do as the headlights are the wrong shape to achieve that simply by moving them further forward with bracketing.

Perhaps it would be possible to do create lenses like those in the clear lenses group buy, but make them much deeper so they finish flush. But one would need new rubber gaskets and a way of fixing the gaskets. Not that it couldn't be done, but it would need quite a lot of design work, sourcing and so on.

Mkaing them from smoke coloured plastic or even that slight mirror effect plastic would probably be the way to go. Perhaps painting the bit of bumper behind the plastic grey would help too.
DaveyItems for sale
SwissFerdi
#14
>
QUOTE (BloodyStupidDavey @ Dec 20, 2009 - 3:12 PM) *
>I think that would be quite difficult to do as the headlights are the wrong shape to achieve that simply by moving them further forward with bracketing.


I was thinking more along the lines of eliminating the primary lens and then somehow moving up the assembly, then fitting the clear lens in the original post over the bulb. Follow me?
'97 ST\ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+[sold 10/18]'93 MX-5LE
BloodyStupidDave...
#15
>
QUOTE (SwissFerdi @ Dec 20, 2009 - 8:20 PM) *
>I was thinking more along the lines of eliminating the primary lens and then somehow moving up the assembly, then fitting the clear lens in the original post over the bulb. Follow me?


Yes, but unfortunately I still don't think it will work with the original accessory lenses pictured above. I think it could be done by making a new clear plastic primary lens, some kind of hybrid based on both the accessory lens and the clear primary lens from the group buy.

This post has been edited by BloodyStupidDavey: Dec 20, 2009 - 3:38 PM
DaveyItems for sale
ajmorris1977
#16
>
QUOTE (BloodyStupidDavey @ Dec 20, 2009 - 4:35 PM) *
>>
QUOTE (SwissFerdi @ Dec 20, 2009 - 8:20 PM) *
>I was thinking more along the lines of eliminating the primary lens and then somehow moving up the assembly, then fitting the clear lens in the original post over the bulb. Follow me?


Yes, but unfortunately I still don't think it will work with the original accessory lenses pictured above. I think it could be done by making a new clear lens, some kind of hybrid based on both the accessory lens and the clear primary lens from the group buy.


thats kind of what i had in mind but how do we get this started?
You're here for a good time, not a long time. - Colin McRaeWhen in doubt... Flat out! - Colin McRaeUndersteer is when you hit the wall with the front of the car.Oversteer is when you hit the wall with the rear of the car.Horsepower is how fast you hit the wall.Torque is how far you take the wall with you....
SwissFerdi
#17
A sh!tload of custom fabrication and invention. Seems pretty impossible since there are things in the way of the headlight being there, the bumper couldn't support the weight and would therefore flex/crack...but you can get it done with enough money.
'97 ST\ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+[sold 10/18]'93 MX-5LE
BloodyStupidDave...
#18
>
QUOTE (ajmorris1977 @ Dec 20, 2009 - 8:38 PM) *
>thats kind of what i had in mind but how do we get this started?


I believe vincent_doggy was trying to do the clear lens group buy so I would suggest starting there. I haven't been following the group buy thread so not sure how far he got with that.
DaveyItems for sale
azian_advanced
#19
i've been trying to get a hold of these for a long time now.. still haven't had any luck. there is one guy in japan that i know of who still has these based on a lot of jp forum searching..



more pics of the sexiness:





----------------------------------------------------------------------------------------------------------------------------------------------------------------
ajmorris1977
#22
>
QUOTE (stl95celica @ Dec 22, 2009 - 12:11 PM) *
>someone please make these.


i second that....
You're here for a good time, not a long time. - Colin McRaeWhen in doubt... Flat out! - Colin McRaeUndersteer is when you hit the wall with the front of the car.Oversteer is when you hit the wall with the rear of the car.Horsepower is how fast you hit the wall.Torque is how far you take the wall with you....
plasticgeordie20...
#24
I have looked all over for these too. I would be interested if someone started making them.
Spider77
#25
I asked about these on another tread. And I do agree that someone def needs to make these!
mgnt232
#26
Absolutely! id buy them in a heart beat, the only option for headlights are projectors, and im not about to go out $700 for some lights lol

>
QUOTE (Spider77 @ Dec 22, 2009 - 8:22 PM) *
>I asked about these on another tread. And I do agree that someone def needs to make these!

I've spilt my heart into this car :) And I don't ever plan to stop- 6GC for Life ->Semper Fi<1994 Cupra :p 3sgte1995 Celica ST DD1969 Chevelle SSalllll balls. P2 approved!
freddy121389
#27
dude smoked would be killer on my car. Who do we know on this site that does custom fabrication with stuff like this
Representing the Convertible Crew since 2008
BonzaiCelica
#28
might add 1mph faster to your top speed...

ya they look alright

This post has been edited by BonzaiCelica: Dec 23, 2009 - 1:24 PM
Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514
SwissFerdi
#29
We should put a proposition for this to Vincent, he does all kinds of crazy stuff anyway. If he can make an acrylic deck spacer for the 3S-GE, he can make an acrylic headlight cover. Only issue would be mounting, as I wouldn't be too keen to drill into my bumper, especially not right where the curve is and the plastic is probably pretty weak.

This post has been edited by SwissFerdi: Dec 23, 2009 - 1:24 PM
'97 ST\ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+[sold 10/18]'93 MX-5LE
SinisterSinner
#30
I've been planning to make something like this, but intead of being a cover they would be the headlights themselves that would stick out parallel to the bumper's curves.
I also am planning to make headlights that would eliminate the need of highbeams using the same bulb for high and low beams wink.gif
waiting for LEDs for next projectWOW recieved the LEDs, just tested a set up on a breadboard and I can barely see anything lol. I think I'm closer to being blind !!
← Back to Topics

Page 1 of 2 (36 total posts)