is the 1996 toyota celica (non-turbo) an OBD2? and if it is where is the slot?
Thanks, dumb question but yea, we all have them. ahah
Thanks, dumb question but yea, we all have them. ahah
dumb question - 6G Celicas Forums
driver side fender under the hood, where the firewall meets the fender.
Thank you, im used to them being inside the car hahah.
should be under the dash on the gas pedal side
is it OBD2? i saw the one under the hood on the driver side fender, but the OBD2 that im borrowing does not fit... im also goign to check under teh diverside dash by the gas.
>
95 OBDI and 96 + ODBII. thats for sure..
QUOTE (Zeroman @ Jan 20, 2010 - 6:31 PM) 
>is it OBD2? i saw the one under the hood on the driver side fender, but the OBD2 that im borrowing does not fit... im also goign to check under teh diverside dash by the gas.
95 OBDI and 96 + ODBII. thats for sure..
My diag computer has 4 or 5 different OBD2 cables, there is also a connector under the dash by the steering column.
diagnostic is under the hood, ecu obd2 connector is to the right of the steering column right above the gas pedal pretty much
>
Thats a yes and a no in 1996 they required that all cars have OBDII but not all 96 car where built in 96 many where built in 95 before the requirement. So when working on a 96 always check the date on the door jam sticker to know if it is OBDI or II
QUOTE (benzo @ Jan 21, 2010 - 12:19 AM)
>>
95 OBDI and 96 + ODBII. thats for sure..
QUOTE (Zeroman @ Jan 20, 2010 - 6:31 PM)
>is it OBD2? i saw the one under the hood on the driver side fender, but the OBD2 that im borrowing does not fit... im also goign to check under teh diverside dash by the gas.
95 OBDI and 96 + ODBII. thats for sure..
Thats a yes and a no in 1996 they required that all cars have OBDII but not all 96 car where built in 96 many where built in 95 before the requirement. So when working on a 96 always check the date on the door jam sticker to know if it is OBDI or II
>
Also depends on the intended territory. IIRC, OBDII was standard fit on the USDB 96+ and JDM 98+. UK/Europe didn't get OBDII in 6th Gen. at all.
QUOTE (hatchy_gt-s @ Jan 21, 2010 - 1:38 PM)
>Thats a yes and a no in 1996 they required that all cars have OBDII but not all 96 car where built in 96 many where built in 95 before the requirement. So when working on a 96 always check the date on the door jam sticker to know if it is OBDI or II
Also depends on the intended territory. IIRC, OBDII was standard fit on the USDB 96+ and JDM 98+. UK/Europe didn't get OBDII in 6th Gen. at all.
DaveyItems for sale
^ Along with that many cars -96 can be OBDII in the United States.
>
yeah thats true.. If they were made real early in the year right? but then , does that mean even tho its 96, its not 25th anni?
QUOTE (hatchy_gt-s @ Jan 21, 2010 - 8:38 AM)
>>
Thats a yes and a no in 1996 they required that all cars have OBDII but not all 96 car where built in 96 many where built in 95 before the requirement. So when working on a 96 always check the date on the door jam sticker to know if it is OBDI or II
QUOTE (benzo @ Jan 21, 2010 - 12:19 AM)
>>
95 OBDI and 96 + ODBII. thats for sure..
QUOTE (Zeroman @ Jan 20, 2010 - 6:31 PM)
>is it OBD2? i saw the one under the hood on the driver side fender, but the OBD2 that im borrowing does not fit... im also goign to check under teh diverside dash by the gas.
95 OBDI and 96 + ODBII. thats for sure..
Thats a yes and a no in 1996 they required that all cars have OBDII but not all 96 car where built in 96 many where built in 95 before the requirement. So when working on a 96 always check the date on the door jam sticker to know if it is OBDI or II
yeah thats true.. If they were made real early in the year right? but then , does that mean even tho its 96, its not 25th anni?
OBD II ports will ALWAYS be inside the car, and use the same type of connector. Part of the standard is that the port will be inside the car, within reach of the driver.
1999 Celica GT
Where does the OBD2 port's wires goto exactly?
I had a look at the 6th gen BGB (I think it was?) but it was dated for pre-OBD2 I believe.
I had a look at the 6th gen BGB (I think it was?) but it was dated for pre-OBD2 I believe.
DIY, How To, and Make: Articles & Service Manuals for your Car or Truck
>
The OBDII(On Board Diagnostics version2) goes to the PCM(Powertrain Control Module) also known as the ECU or the cars computer.
QUOTE (acidice333 @ Jan 25, 2010 - 8:39 AM)
>Where does the OBD2 port's wires goto exactly?
I had a look at the 6th gen BGB (I think it was?) but it was dated for pre-OBD2 I believe.
I had a look at the 6th gen BGB (I think it was?) but it was dated for pre-OBD2 I believe.
The OBDII(On Board Diagnostics version2) goes to the PCM(Powertrain Control Module) also known as the ECU or the cars computer.