Over 1M Posts • 84K Topics • 9K Authors

Intercooler St205 help - 6G Celicas Forums

Topic #71889 6 posts Started by celica95-95
Just about to do a swap of 3rd gen 3sgte in to 5sfe with a gt4 front end , will the stock rad fit in and work with the 3sgte 3rd gen ?

and is the intercooler on 3sgte have two rad's ... i seen in some pic's a smaller looking rad maybe a (Front Mount Heat exchanger) I this part need in the swap ??
the st205 intercooler is a Water to Air intercooler it sits on top of the engine. (the large box u see)

as for the 2 radiators, 1 is the radiator while the other is the heat exchanger. And YES the heat exchanger is required for the swap.

KawiLove
As long as you have a gt, the stock radiator will work fine. ST's need to be modified a bit.
And yes, the bottom one is the heat exchanger for the stock intercooler.

15PSI - 30MPG - Megasquirt Tuned
Yea I have a gt , would I still need a heart exchange for the swap ?
>
QUOTE (celica95-95 @ Jan 26, 2010 - 1:09 PM) *
>Yea I have a gt , would I still need a heart exchange for the swap ?


YES (if you plan on using the stock water to air intercooler)
NO (if you plan on using an air to air front mount intercooler)

15PSI - 30MPG - Megasquirt Tuned
On most Motor it seem that the hear exchange does not come with ?

does it bolt up to the other side of the rad?

This post has been edited by celica95-95: Jan 26, 2010 - 10:10 PM