how i install them? it looks like i would have to take out the black plastic part of teh door sill..is there something im missing or is there already a guide how to do it? thanks
invader skirts - 6G Celicas Forums
>
its quite easy to do, take out the black plastic in the door and place them on the car, 2 screws in the front wheel well and two in the rear and the a couple in the door jam to push them down to clear the door when it closes, then reinstall the black plastic over the top of the skirt, no problem. Good luck and have fun...
QUOTE (Spectorious @ Feb 3, 2010 - 8:40 PM) 
>how i install them? it looks like i would have to take out the black plastic part of teh door sill..is there something im missing or is there already a guide how to do it? thanks
its quite easy to do, take out the black plastic in the door and place them on the car, 2 screws in the front wheel well and two in the rear and the a couple in the door jam to push them down to clear the door when it closes, then reinstall the black plastic over the top of the skirt, no problem. Good luck and have fun...
You're here for a good time, not a long time. - Colin McRaeWhen in doubt... Flat out! - Colin McRaeUndersteer is when you hit the wall with the front of the car.Oversteer is when you hit the wall with the rear of the car.Horsepower is how fast you hit the wall.Torque is how far you take the wall with you....
Do you know where to get the double sided tape? is it just any double sided, or is there some special stuff for SS. thanks!
Oh and i have invader SS too Spectorious, waiting for the cold to go away, if i put them on before you i will tell you how it went, and if you put them on before me, would you mind telling me any problems you had? thanks!
>
Oh and i have invader SS too Spectorious, waiting for the cold to go away, if i put them on before you i will tell you how it went, and if you put them on before me, would you mind telling me any problems you had? thanks!
>
QUOTE (ajmorris1977 @ Feb 3, 2010 - 9:13 PM)
>>
its quite easy to do, take out the black plastic in the door and place them on the car, 2 screws in the front wheel well and two in the rear and the a couple in the door jam to push them down to clear the door when it closes, then reinstall the black plastic over the top of the skirt, no problem. Good luck and have fun...
QUOTE (Spectorious @ Feb 3, 2010 - 8:40 PM)
>how i install them? it looks like i would have to take out the black plastic part of teh door sill..is there something im missing or is there already a guide how to do it? thanks
its quite easy to do, take out the black plastic in the door and place them on the car, 2 screws in the front wheel well and two in the rear and the a couple in the door jam to push them down to clear the door when it closes, then reinstall the black plastic over the top of the skirt, no problem. Good luck and have fun...
I've spilt my heart into this car :) And I don't ever plan to stop- 6GC for Life ->Semper Fi<1994 Cupra :p 3sgte1995 Celica ST DD1969 Chevelle SSalllll balls. P2 approved!
>
i put mine on and had no problems, i got my double sided tape from home depot, just try to be sure that the door doesn't rub on them or it will scuff up the paint and annoy the hell out of you. please feel free to pm me with any questions as i have fitted the entire kit and i'm about to smooth mine to get better lines.
QUOTE (mgnt232 @ Feb 3, 2010 - 10:48 PM)
>Do you know where to get the double sided tape? is it just any double sided, or is there some special stuff for SS. thanks!
Oh and i have invader SS too Spectorious, waiting for the cold to go away, if i put them on before you i will tell you how it went, and if you put them on before me, would you mind telling me any problems you had? thanks!
>
Oh and i have invader SS too Spectorious, waiting for the cold to go away, if i put them on before you i will tell you how it went, and if you put them on before me, would you mind telling me any problems you had? thanks!
>
QUOTE (ajmorris1977 @ Feb 3, 2010 - 9:13 PM)
>>
its quite easy to do, take out the black plastic in the door and place them on the car, 2 screws in the front wheel well and two in the rear and the a couple in the door jam to push them down to clear the door when it closes, then reinstall the black plastic over the top of the skirt, no problem. Good luck and have fun...
QUOTE (Spectorious @ Feb 3, 2010 - 8:40 PM)
>how i install them? it looks like i would have to take out the black plastic part of teh door sill..is there something im missing or is there already a guide how to do it? thanks
its quite easy to do, take out the black plastic in the door and place them on the car, 2 screws in the front wheel well and two in the rear and the a couple in the door jam to push them down to clear the door when it closes, then reinstall the black plastic over the top of the skirt, no problem. Good luck and have fun...
i put mine on and had no problems, i got my double sided tape from home depot, just try to be sure that the door doesn't rub on them or it will scuff up the paint and annoy the hell out of you. please feel free to pm me with any questions as i have fitted the entire kit and i'm about to smooth mine to get better lines.
You're here for a good time, not a long time. - Colin McRaeWhen in doubt... Flat out! - Colin McRaeUndersteer is when you hit the wall with the front of the car.Oversteer is when you hit the wall with the rear of the car.Horsepower is how fast you hit the wall.Torque is how far you take the wall with you....
thanks guys ill let you know how it goes..unfortuantly the skirts are silver and the car is red so im gonna have to paint them b4 they go on but i can def test fit...the silver on red doesnt look bad but i dont want it to look rice either
when you paint them do it right, sand, primer, wet sand, primer again, paint, wetsand, paint
1996 Toyota Celica Project Mean Green3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <32001 Solar yellow Lexus IS3002001 Dodge ram 1500 Off-road edition
>
yea i know i actually have a friend who does body work and he said hes gonna do it for me if i pay for supplies...hes also gonna do my front and rear splitters that i just got and hes gonna redo my wing
QUOTE (96stgreendemon @ Feb 4, 2010 - 1:09 PM)
>when you paint them do it right, sand, primer, wet sand, primer again, paint, wetsand, paint
yea i know i actually have a friend who does body work and he said hes gonna do it for me if i pay for supplies...hes also gonna do my front and rear splitters that i just got and hes gonna redo my wing