About to go to work on my hatch and bumpers. When I open my hatch there is this spot at the top that is rusted, but not rusted enough to make holes in the car. Also, there are 4 tiny rust spots on my bumpers (2 on the front and 2 on the back) that I am going to sand down and repaint.

I will get pictures up as soon as I get this started. I dk, maybe a "How-To" on removing the hatch will come along with this .

you have rust on a polyurethane bumper?!

u must have it on the fenders or hood(metal),because the bumpers are poly,and i think that would take some gypse magic to rust...If its just surface rust then just sand it down and primer and paint over it..all done haha

This post has been edited by CelicaST_CALI: Mar 15, 2010 - 12:42 PM

Yeah, its not on the bumpers, on the very bottom of the fenders.. my bad . It's rusted into the metal a little bit, but yeah I'm just gonna sand it and paint over it. Just finished sanding and painting the rust underneath the hatch.

Didn't write a How-To, I got frustrated after running to Auto Zone like 3 times because I kept forgetting things >.<.

Prep:




Painted: