Thanks, PM replied
FS: PARTING OUT 97 GT - 6G Celicas Forums
>
I NEED THE DRIVER LIGHTS THE HIGH BEAM AND THE LOW BEAM
AND THE HOOD
QUOTE (hurley97 @ Apr 8, 2010 - 7:13 PM) 
>1997 Toyota Celica GT, Auto, Power windows/locks, Sunroof, Grey interior
More info and problems with the car:
This car has a lot of bondo and bad body work done to both rear quarters and the bottom of the doors are starting to show signs of rust.
The key works great in all the locks. Ignition cylinder, both doors, trunk, glove box. One original master key and one newly cut key, both work.
The interior is in great condition. The car only has 126,853 miles on it. Everything electronically works except for the shifter. Gas pedal is no good either.
The door panels are beautiful, only problem is a spot on the passenger side that's deformed but you can't see it when the door is closed (see pics).
The right side window regulator/motor is in our red car and the one from our car is in this one. It went up slow and made noise toward the top of the track.
I think Dustin wants the seats, we won't ship them anyway, but if someone locally wants seats they can look at the ones in his car and we may sell those.
The car started and ran but had a rod knock, while trying to drive it home the rod let go and I seized the motor. Bottom half of the motor is no good.
Things that are already spoken for/sold:
Front bumper, turns and fog lights
Rear hatch glass
Steering rack and high pressure lines
Passenger side visor is missing
Headlight switch and harness
Tweeters and covers are sold
Speakers are gone/installed in our red car
Both front fenders
Front seatbelts
sunroof visor sold
mud flaps sold
low beam rubber seals sold
lighter assemblies sold
power antenna sold
windshield washer nozzles sold
carpet pending sale when avail
washer bottle pending sale when avail
cruise control stalk sold, waiting to ship w/ washer bottle
auto shifter parts sold
glove box latch/lock sold
whats left of the auto shifter is garbage
Stock exhaust pending pickup
stock airbox pending pickup
spoiler pending pickup
steering wheel/airbag sold
radiator sold
I NEED THE 2 DRIVER SIDE HEADLIGHTS
Pictures:
More info and problems with the car:
This car has a lot of bondo and bad body work done to both rear quarters and the bottom of the doors are starting to show signs of rust.
The key works great in all the locks. Ignition cylinder, both doors, trunk, glove box. One original master key and one newly cut key, both work.
The interior is in great condition. The car only has 126,853 miles on it. Everything electronically works except for the shifter. Gas pedal is no good either.
The door panels are beautiful, only problem is a spot on the passenger side that's deformed but you can't see it when the door is closed (see pics).
The right side window regulator/motor is in our red car and the one from our car is in this one. It went up slow and made noise toward the top of the track.
I think Dustin wants the seats, we won't ship them anyway, but if someone locally wants seats they can look at the ones in his car and we may sell those.
The car started and ran but had a rod knock, while trying to drive it home the rod let go and I seized the motor. Bottom half of the motor is no good.
Things that are already spoken for/sold:
Front bumper, turns and fog lights
Rear hatch glass
Steering rack and high pressure lines
Passenger side visor is missing
Headlight switch and harness
Tweeters and covers are sold
Speakers are gone/installed in our red car
Both front fenders
Front seatbelts
sunroof visor sold
mud flaps sold
low beam rubber seals sold
lighter assemblies sold
power antenna sold
windshield washer nozzles sold
carpet pending sale when avail
washer bottle pending sale when avail
cruise control stalk sold, waiting to ship w/ washer bottle
auto shifter parts sold
glove box latch/lock sold
whats left of the auto shifter is garbage
Stock exhaust pending pickup
stock airbox pending pickup
spoiler pending pickup
steering wheel/airbag sold
radiator sold
I NEED THE 2 DRIVER SIDE HEADLIGHTS
Pictures:
I NEED THE DRIVER LIGHTS THE HIGH BEAM AND THE LOW BEAM
AND THE HOOD
The drivers side high beam has two broken tabs and is full of water. Driver side low beam is fine. Both passenger side lights are fine.
I will not ship the hood.
Just a few things people asked me about, I took off the car, and people haven't paid for yet...
***ONE OF THESE IS LEFT BUT IT IS SLIGHTLY FLAWED***
This post has been edited by hurley97: May 19, 2010 - 7:47 PM
I will not ship the hood.
Just a few things people asked me about, I took off the car, and people haven't paid for yet...
***ONE OF THESE IS LEFT BUT IT IS SLIGHTLY FLAWED***
This post has been edited by hurley97: May 19, 2010 - 7:47 PM
7A-FTE:It's not about the money.Our Beams Swap.I <3 Dustin---07/16/06
Is the clockspring in good shape? I might need it, the yard in Utah that I sourced one from sent me one from a '91 LS400. No es bueno. They're supposed to ship me out the right one, but I'm freaking out a little because my tags expire at the end of the month & I'm concerned I'm gonna have problems w/safety & emissions. Plus, I just really feel that I should have a functioning horn. 
I updated the first post with recently sold items. There's still a lot of interior plastics and stuff left.
7A-FTE:It's not about the money.Our Beams Swap.I <3 Dustin---07/16/06
>
How much for 1 set of dash box and a AC unit?
shipping cost to spain. 35014
Have you toher items about the cruise control, as the switch pedal, cable or others cruise elements?
Thanks.
This post has been edited by eduardorq: Apr 25, 2010 - 5:49 AM
QUOTE (hurley97 @ Apr 12, 2010 - 12:25 AM)
>
How much for 1 set of dash box and a AC unit?
shipping cost to spain. 35014
Have you toher items about the cruise control, as the switch pedal, cable or others cruise elements?
Thanks.
This post has been edited by eduardorq: Apr 25, 2010 - 5:49 AM
My Swap project AT200 to ST202 BEAMS
how much for a complete driver's wheel hub/spindle assembly???
I don't normally drive fast, but when I do its on a curvy section of this island
Someone actually wanted both front complete hubs so I took them off the car and put them in a box and everything. I asked if they needed the ABS sensors and he replied that his car doesnt have ABS and he doesnt think he can use them, I guess he didnt believe me when I said he could cause he never responded or paid me.
So yeah, PM me with your offer and we'll go from there.
So yeah, PM me with your offer and we'll go from there.
7A-FTE:It's not about the money.Our Beams Swap.I <3 Dustin---07/16/06
door panels are still available
hatch carpet is still available
center console piece is not 100% perfect, has been shaved down at the top a little. if anyone is interested in it I'll sell it for cheap
cruise ecu, door lock control module, driver side master switch, clockspring, visor clips
glove compartment (has a scratch)
blower motor, wiper switch, side markers, pass side mirror assembly, rear seat hinges and latches
full airbag set; driver side, pass side, airbag ecu, front crash sensors (not pictured)
5sfe valve cover
96+ 5sfe distributor
rear seatbelts and buckles
This post has been edited by hurley97: May 10, 2010 - 2:57 PM
hatch carpet is still available
center console piece is not 100% perfect, has been shaved down at the top a little. if anyone is interested in it I'll sell it for cheap
cruise ecu, door lock control module, driver side master switch, clockspring, visor clips
glove compartment (has a scratch)
blower motor, wiper switch, side markers, pass side mirror assembly, rear seat hinges and latches
full airbag set; driver side, pass side, airbag ecu, front crash sensors (not pictured)
5sfe valve cover
96+ 5sfe distributor
rear seatbelts and buckles
This post has been edited by hurley97: May 10, 2010 - 2:57 PM
7A-FTE:It's not about the money.Our Beams Swap.I <3 Dustin---07/16/06
lot of things still left
front and rear wiper motors
door lock actuators, latches, handles, rods
hatch and fuel door release levers and cables
full set of lock and ignition cylinders (minus the glove box handle/latch)
This post has been edited by hurley97: May 19, 2010 - 7:48 PM
front and rear wiper motors
door lock actuators, latches, handles, rods
hatch and fuel door release levers and cables
full set of lock and ignition cylinders (minus the glove box handle/latch)
This post has been edited by hurley97: May 19, 2010 - 7:48 PM
7A-FTE:It's not about the money.Our Beams Swap.I <3 Dustin---07/16/06
I could use air bags and air bag ecu, plus crash (collision) bar in front and bracket insert on passenger side. Shipping to 93614, central Calif. Thanks, Ron.
how much for stock exhaust?
>
its already gone. sorry
QUOTE (Jeremie @ May 10, 2010 - 9:00 PM)
>how much for stock exhaust?
its already gone. sorry
7A-FTE:It's not about the money.Our Beams Swap.I <3 Dustin---07/16/06
got the center console armrest hinge? if so how much? thanks
Stock OE battery tie down? I need the whole assembly I think (tray, strap, bolts)
Do you have the drivers side window regulator?
1999 Celica GT Hatchback
are the side turns still up for grabs?
Are available both the 2din console frames? How much for send them to Italy?
This post has been edited by max-elle: May 11, 2010 - 6:02 AM
This post has been edited by max-elle: May 11, 2010 - 6:02 AM
>
there are pictures of it on the second page, the hinge is part of the armrest which has a few broken pieces
>
did not have one. you can get those parts from the dealer cheap
>
sold to oholic already
>
I have the side markers that go on the fenders.
QUOTE (DaCCelica94 @ May 10, 2010 - 9:12 PM)
>got the center console armrest hinge? if so how much? thanks
there are pictures of it on the second page, the hinge is part of the armrest which has a few broken pieces
>
QUOTE (viruz_one @ May 10, 2010 - 10:00 PM)
>Stock OE battery tie down? I need the whole assembly I think (tray, strap, bolts)
did not have one. you can get those parts from the dealer cheap
>
QUOTE (SoDo @ May 10, 2010 - 10:39 PM)
>Do you have the drivers side window regulator?
sold to oholic already
>
QUOTE (Oholic @ May 11, 2010 - 1:41 AM)
>are the side turns still up for grabs?
I have the side markers that go on the fenders.
7A-FTE:It's not about the money.Our Beams Swap.I <3 Dustin---07/16/06
pm me about the center consol and i need the little clips that hold up the roof liner at the back.
Hmm thanks for the heads up on the battery tie down Ill look into it in the dealr. 
how much for the cig assembly? I really just need the bulb though.
94 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi||Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto||Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr804 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy|89 Supra (Sold)90 Supra (Sold)
>
I don't have any more lighter assemblies. I may have a spare bulb somewhere though, I have to look around when I get home. I'll let you know.
QUOTE (trdproven @ May 12, 2010 - 8:27 AM)
>how much for the cig assembly? I really just need the bulb though.
I don't have any more lighter assemblies. I may have a spare bulb somewhere though, I have to look around when I get home. I'll let you know.
7A-FTE:It's not about the money.Our Beams Swap.I <3 Dustin---07/16/06
Do you have or are you selling the calipers? IIRC front GT calipers are different than front ST calipers, right? If so then I'd just want the rear calipers, if the fronts are compatible w/ST, I'd want all 4.
PS: That clockspring showed up from the junk yard in Utah, btw... but thanks for the quick response (even though my thanks is delayed )
This post has been edited by GriffGirl: May 12, 2010 - 4:55 PM
PS: That clockspring showed up from the junk yard in Utah, btw... but thanks for the quick response (even though my thanks is delayed
)
This post has been edited by GriffGirl: May 12, 2010 - 4:55 PM
>
GT front calipers are bigger, you would need new rotors and pads to use the GT fronts on your ST. The rear calipers have already been sold with all the rear disc conversion parts.
No problem, if you need anything else just ask.
QUOTE (GriffGirl @ May 12, 2010 - 5:54 PM)
>Do you have or are you selling the calipers? IIRC front GT calipers are different than front ST calipers, right? If so then I'd just want the rear calipers, if the fronts are compatible w/ST, I'd want all 4.
PS: That clockspring showed up from the junk yard in Utah, btw... but thanks for the quick response (even though my thanks is delayed )
PS: That clockspring showed up from the junk yard in Utah, btw... but thanks for the quick response (even though my thanks is delayed
)GT front calipers are bigger, you would need new rotors and pads to use the GT fronts on your ST. The rear calipers have already been sold with all the rear disc conversion parts.
No problem, if you need anything else just ask.
7A-FTE:It's not about the money.Our Beams Swap.I <3 Dustin---07/16/06
UPDATED
**EVERYTHING IS SOLD FOR BEST OFFER**
I removed all the pictures of things that are sold. All the pictures on page 2 are things that are still available. The rest of the stuff and the car are going to the junkyard on Saturday 5/22. Anything else not pictures that is not requested and paid for by Saturday is going in the crusher with the car!!
This post has been edited by hurley97: May 19, 2010 - 7:54 PM
**EVERYTHING IS SOLD FOR BEST OFFER**
I removed all the pictures of things that are sold. All the pictures on page 2 are things that are still available. The rest of the stuff and the car are going to the junkyard on Saturday 5/22. Anything else not pictures that is not requested and paid for by Saturday is going in the crusher with the car!!
This post has been edited by hurley97: May 19, 2010 - 7:54 PM
7A-FTE:It's not about the money.Our Beams Swap.I <3 Dustin---07/16/06
Im seriously intrested in the radiohousing/cubby that goes underneath it, I could also use the bezel that has the pocket next to the cig lighter, Let me know price shipped to
Sierra Vista, Az 85635 Thanks
Sierra Vista, Az 85635 Thanks
Celica Enthusiast with no experience. LoLs Looking for people closer to my area to talk/work on projects, let me know if your near 85635 Sierra Vista, Az
How much for the 1s't trim on the left (the big one) shipped ?? lmk thanks
"To Protect And To Serve The Wealthy" -POLICE
What about the driver side window motor and regulator to 29212?
1994 Celica GT, coupe, 5 speed.Front strut brace, cherrybomb glasspack, intake.
Hi,
I'm looking for a complete stock air cleaner box with the connector to the FI unit and the factory mounting bolts.
And also, the mounting brackets and cover for the cruise control actuator + all stock mounting hardware. Shipping to 33983, Punta Gorda, FL.
I'm new to the forum. My daughter just got a '96 Celica GT convertible automatic. I'm trying to correct a couple things on it.
Thanks,
Bob
This post has been edited by 74Bob: May 20, 2010 - 2:40 PM
I'm looking for a complete stock air cleaner box with the connector to the FI unit and the factory mounting bolts.
And also, the mounting brackets and cover for the cruise control actuator + all stock mounting hardware. Shipping to 33983, Punta Gorda, FL.
I'm new to the forum. My daughter just got a '96 Celica GT convertible automatic. I'm trying to correct a couple things on it.
Thanks,
Bob
This post has been edited by 74Bob: May 20, 2010 - 2:40 PM