Over 1M Posts • 84K Topics • 9K Authors

Home > Topic #73556

FS: JDM Tails - 6G Celicas Forums

Topic #73556 25 posts Started by 95GTCelica
95GTCelica
#1
I have a pair of JDM tails for sale. I sold my 6gc a long time ago but held on to these in the hopes that someone else might want them. They have the clear corner mod already done to them. The back is sealed very well and I never had problems with condensation. I need to sell these fast. I'm a college student and need money ASAP. Looking for $175 + shipping OBO. I'm located in Canoga Park/Woodland Hills CA if you want local pick-up. Thanks for checkin this out.















kevinkoda
#2
i would soo buy this..but moneys kinda tight right now =\
HerosBlade
#3
r you willing to hold these for one more week cause payday if not that's ok but if can i will buy it promise. Also the wiring harness from the car itself can be used expect the red corner bulb not being used correct.
The New Kid on the Block
95GTCelica
#4
Hero: I'm not really willing to hold them for one person. sorry. I've had some bad experiences with that kinda situation before. If they are around for another week though I'll definitely give you a heads up. Oh and yes you are correct about the harness.

Ladies and gentlemen I do need to get rid of these ASAP and will consider any REASONABLE offer.

This post has been edited by 95GTCelica: Apr 28, 2010 - 1:52 PM
HerosBlade
#6
thanks bro for letting me know
The New Kid on the Block
HectortheRican
#7
Same with Hero. If this was in about a month, I'd GLADY take these off of your hands. My Celi is black so that clear corner looks extra good tongue.gif
bump for a good deal
taking too long to mod since '09June '12 COTM'95 AT200
95GTCelica
#10
Thanks for the bump Hector. smile.gif Boosted, sometimes I wish the same thing. lol

Still entertaining offers...Send me a PM.
dz93
#12
are these still for sale?
will u post to australia?
dudeofchaos
#13
What's the difference between the clear and amber corners? (What do you do to make it clear?) I thought it was only the bulb that made it look clear or amber.

This post has been edited by dudeofchaos: Oct 5, 2010 - 6:43 PM
DEATH
#14
>
QUOTE (dudeofchaos @ Oct 5, 2010 - 6:42 PM) *
>What's the difference between the clear and amber corners? (What do you do to make it clear?) I thought it was only the bulb that made it look clear or amber.

Look at the pics of the back - see the white roughly square section of caulk like substance? That is sealing the cut he made to remove the Ambers wink.gif
ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI]PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYOSUSP: Tein/Bilstein/SusTech/INT: SS-III SEATS/Toyota Hyper SportsEXT: WRC/TRD/404QUOTE (lagos @ Aug 25, 2010 - 10:13 AM)Its a safety feature so that people like you don't end up killing themselves or everyone around them.Slow down Paul Walker.6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url]
dudeofchaos
#15
>
QUOTE (DEATH @ Oct 5, 2010 - 7:01 PM) *
>>
QUOTE (dudeofchaos @ Oct 5, 2010 - 6:42 PM) *
>What's the difference between the clear and amber corners? (What do you do to make it clear?) I thought it was only the bulb that made it look clear or amber.

Look at the pics of the back - see the white roughly square section of caulk like substance? That is sealing the cut he made to remove the Ambers wink.gif


Ohh I see. But how can you ''Remove'' this amber part? Isn'it part of the tail light itself?
KAOS
#16
>
QUOTE (dudeofchaos @ Oct 5, 2010 - 11:09 PM) *
>Ohh I see. But how can you ''Remove'' this amber part? Isn'it part of the tail light itself?


Nah - its held in place by a tiny screw, that once removed, allows you to pull the square shaped amber plastic out and reseal the taillight housing...

As for you, DEATH;
>
QUOTE (DEATH @ Oct 5, 2010 - 7:01 PM) *
>...see the white roughly square section of caulk...


Thats what she said...
KAOS|THE PROGRESSION - SLOW & STEADY|PARTING OUT- it ALL must go!|
dudeofchaos
#17
>
QUOTE (KAOS @ Oct 6, 2010 - 11:16 AM) *
>>
QUOTE (dudeofchaos @ Oct 5, 2010 - 11:09 PM) *
>Ohh I see. But how can you ''Remove'' this amber part? Isn'it part of the tail light itself?


Nah - its held in place by a tiny screw, that once removed, allows you to pull the square shaped amber plastic out and reseal the taillight housing...

As for you, DEATH;
>
QUOTE (DEATH @ Oct 5, 2010 - 7:01 PM) *
>...see the white roughly square section of caulk...


Thats what she said...


Oh I see. Hmm nice then, you can still have an amber flashing bulb with a total clear tail light biggrin.gif
Thanks for the info!

This post has been edited by dudeofchaos: Oct 6, 2010 - 10:29 AM
KAOS
#18
>
QUOTE (dudeofchaos @ Oct 6, 2010 - 9:29 AM) *
>Oh I see. Hmm nice then, you can still have an amber flashing bulb with a total clear tail light biggrin.gif
Thanks for the info!


Yes and no - once you remove the amber portion of the housing, you'll need to swap out the white oem bulb for an orange one, and in order to keep the clear lens looking clear, you'll need to grab a bulb like this:

KAOS|THE PROGRESSION - SLOW & STEADY|PARTING OUT- it ALL must go!|
dz93
#19
pm'd
are these still available.
HectortheRican
#20
>
QUOTE (KAOS @ Oct 6, 2010 - 9:43 AM) *
>>
QUOTE (dudeofchaos @ Oct 6, 2010 - 9:29 AM) *
>Oh I see. Hmm nice then, you can still have an amber flashing bulb with a total clear tail light biggrin.gif
Thanks for the info!


Yes and no - once you remove the amber portion of the housing, you'll need to swap out the white oem bulb for an orange one, and in order to keep the clear lens looking clear, you'll need to grab a bulb like this:



That's if you use the USDM harness. If you get the JDM harness, you'll need 7447 bulbs
taking too long to mod since '09June '12 COTM'95 AT200
SupraKid
#21
I also have a set, with amber piece for 180$ plus shipping.
dz93
#22
>
QUOTE (HectortheRican @ Oct 7, 2010 - 4:29 PM) *
>>
QUOTE (KAOS @ Oct 6, 2010 - 9:43 AM) *
>>
QUOTE (dudeofchaos @ Oct 6, 2010 - 9:29 AM) *
>Oh I see. Hmm nice then, you can still have an amber flashing bulb with a total clear tail light biggrin.gif
Thanks for the info!


Yes and no - once you remove the amber portion of the housing, you'll need to swap out the white oem bulb for an orange one, and in order to keep the clear lens looking clear, you'll need to grab a bulb like this:



That's if you use the USDM harness. If you get the JDM harness, you'll need 7447 bulbs


so if i were do buy a set of these lights off suprakid for example, and he said he would remove the amber. exactly, what type of bulb do i need for my lights (non amber).
and what are the harness' if i am interchanging my stock/standard lights to the jdm ones, is there anything i need?
HectortheRican
#24
Those normal 1157's would work fine. As for the LED's, I wouldn't go cheap on them.
taking too long to mod since '09June '12 COTM'95 AT200
dz93
#25
thanks for the help. i bought suprakids jdm tails and the bulbs that were in the first link that i posted. not the led ones.
← Back to Topics