Over 1M Posts • 84K Topics • 9K Authors

HectortheRican's progress thread - 6G Celicas Forums

Topic #75110 412 posts Started by HectortheRican
I've been lagging on one of these, but I finally have the time to start one up. My mods will come slowly but surely due to minimum wage kindasad.gif But I'll keep truckin'!

I was actually trying and trying so hard to buy a 240, I love the things, but every single one I'd find was either too expensive because they were all SR20'd and S15'd out, or too beat down and crappy. But then one day I came across this Celica because the poster had put '240sx' as a tag. I had honestly never even considered a Celica for a second, when I thought Celica, I thought 7gc, and I never liked those. But once I saw this Celica, I fell in love. And thanks to Spider77, I found this site and it's helped me since day 1. Now that I've got a progress thread, I'll start updating it often. Thanks for looking!

The first day I got her. I actually bought her from a member, vi-tuyen.


Then the very first mod when I started working... early June. Injen SRI w/ Fujita filter. Bought from trdproven.

Out


In


Then I picked up an OEM strut bar from a local part out in late June


Three days after the strut bar, I got into a fender bender with an 18 wheeler. I swiped his tire. Luckily, I was fine, and no damage to the truck, and little damage to my car.

Damage assessment: Cracked bumper, totaled RH fender, smashed sidemarker, bent strut, bent wheel.

Literally 20 minutes before the wreck

sexy angle wink.gif

Then when I got home afterwards

Side


Front (see the obvious neg camber? lolol)


This post has been edited by HectortheRican: Apr 10, 2016 - 2:01 AM

taking too long to mod since '09June '12 COTM'95 AT200
At least now you have good offset... Your tyres are sticking past the fenders right?

[b]My Build Thread|Flickr|My Blog
>
QUOTE (whatthe @ Jul 23, 2010 - 2:05 AM) *
>At least now you have good offset... Your tyres are sticking past the fenders right?

Haha, funny guy tongue.gif I finally picked up the new fender today, now I've got everything I need to make her sexy again. It gets fixed on Saturday!

taking too long to mod since '09June '12 COTM'95 AT200
nice! keep us updated. and go at it with the modding, once you start,.... you'll NEVER stop! hahhahaah biggrin.gif

*1997 Celica ST - 3SGE Greytop BEAMS*1977 Celica RA29 - Classic Cruiser*2005 Matrix AWD - dedded but still hanging around like a ghost2019 Rav4 XLE Premium - Sports mode is fun.
I didn't take a whole lot of pics of the repair process, as it's kind of hard for only two people to work and one to take pictures. Next time, I'll have a designated picture-taker. But until I get the rest uploaded, here's the final product of my little weekend project smile.gif


taking too long to mod since '09June '12 COTM'95 AT200
>
QUOTE (HectortheRican @ Jul 26, 2010 - 10:23 AM) *
>I didn't take a whole lot of pics of the repair process, as it's kind of hard for only two people to work and one to take pictures. Next time, I'll have a designated picture-taker. But until I get the rest uploaded, here's the final product of my little weekend project smile.gif



I'm not going lie your car looks good its really clean. I like the stock look with subtle rims maybe just a little lower. but that camaro behind you looks sweet love the color

2003 Matrix XR - Daily Driver1996 Celica ST - In Progress1995 Camry LE - totaled :(
>
QUOTE (Success21 @ Jul 26, 2010 - 11:21 AM) *
>I'm not going lie your car looks good its really clean. I like the stock look with subtle rims maybe just a little lower. but that camaro behind you looks sweet love the color


Thanks! It'll be lowered about 1.5-2 inches in about 2 weeks and I'm getting the Euro-spec splitters soon. I'm keeping her nice and OEM smile.gif

taking too long to mod since '09June '12 COTM'95 AT200
On 7/24, exactly a month after the wreck, I finally collected all the parts I needed to complete the repair. My buddy Taylor came over at 11:00am and we started work.

Facelifted bumper I pulled off a local '98 GT. Originally white, had it painted 202


Fender from Taiwan (Had slight trouble with fitment.) Also painted 202


We got the crushed fender and headlight out and Taylor was working on the LH liner



Forgot to take out the stock intake resonator when I installed the Injen back in June.. woops!


We were wondering what to do with the bent bracket, then the mailman pulled up and low and behold, the bracket I ordered from novak17 came right on time!


Little close up of the bumper


Taylor's got a new drift charm! lolol laugh.gif laugh.gif

(we bent up the damaged fender)

I gave the old bumper to my uncle, he wants to make some sort of light for the garage out of it...


Teaser pic that I had put up earlier


I didn't do too good of a job with the pictures, but I remembered every now and then. We worked straight from 11;00am to 5:00pm with no breaks. Fun little weekend project!

This post has been edited by HectortheRican: Jul 26, 2010 - 5:10 PM

taking too long to mod since '09June '12 COTM'95 AT200
WOOOOOOOOOOOOOOOOOOOOOT!! haha

nice job man! lovin the work. Can't wait to see it once you get some more of your new parts in and then put on!

way to go tongue.gif

NOVAKx172000 Eclipse GT- DD=== oil pump went blown up and sold1997 Celica ST- swapped and sold2004 Ford explorer xlt 4x4- totaled1997 Celica Convertible GT- Going Topless (;(18:32:21) yarik83: axel has a sensitive wife. i hear she used to be a lesbian and then became ferdi( PARTING OUT A GT COUPEhttp://www.6gc.net/forums/index.php?showtopic=88592)
Looking pretty good, maybe I'll have a chance to meet up with you this sunday?
>
QUOTE (Spider77 @ Jul 26, 2010 - 5:17 PM) *
>Looking pretty good, maybe I'll have a chance to meet up with you this sunday?

I was sure hoping so, but that truck is still coming in, I gotta stay and unload it. It's big things too.. tractors, fridges, ovens.. Sorry bro kindasad.gif

taking too long to mod since '09June '12 COTM'95 AT200
Its nice to see the celica back up and looking better than ever.

[b]My Build Thread|Flickr|My Blog
Just ordered the crystal clear Depo turn signals from eBay biggrin.gif

taking too long to mod since '09June '12 COTM'95 AT200
Did you get the full set or just the signals?

*1997 Celica ST - 3SGE Greytop BEAMS*1977 Celica RA29 - Classic Cruiser*2005 Matrix AWD - dedded but still hanging around like a ghost2019 Rav4 XLE Premium - Sports mode is fun.
>
QUOTE (cheela @ Jul 27, 2010 - 3:56 PM) *
>Did you get the full set or just the signals?

I'm assuming that the guy I bought the side markers from (97celiman) had the Depo ones because the side markers are crystal clear like the Depo's will be, but my stock clear turns aren't as crystal-clear.

taking too long to mod since '09June '12 COTM'95 AT200
Welp, found out I have a flat today. It'll be repaired tomorrow afternoon. I'm rolling on the spare right now. But on the bright side, I installed the diamond clear Depo turn signals yesterday and I received the SSIII grille and fog covers I ordered from vincent_doggy today. Pictures up later.

taking too long to mod since '09June '12 COTM'95 AT200
WOW you did great work!!

Here's hoping the gremlins leave the Celica community!!
Finally got around to making my SSIII grille fit. I put in the pins, but they would hold to the crash bar, so I could only think of one thing... my trusty roll of black duct tape biggrin.gif worked perfectly! And I used 3 thin zip ties to secure the grille to the 3 posts in the middle.

Crappy cell phone picture, but you guys get the gist tongue.gif Notice Piccolo on the rearview? SPECIAL BEAM CANNON!

On a simpler note, I went to Home Depot and replaced the rear license plate bolts (Used to be RUSTY) Now they're nice and shiny biggrin.gif And I ordered a set of Falken 512's!

This post has been edited by HectortheRican: Aug 4, 2010 - 1:18 AM

taking too long to mod since '09June '12 COTM'95 AT200
I like the progress youve made with this so far. Its a shame that the seller didnt include all the other stuff with it...But it is looking nice.
>
QUOTE (Spider77 @ Aug 4, 2010 - 4:38 PM) *
>I like the progress youve made with this so far. Its a shame that the seller didnt include all the other stuff with it...But it is looking nice.

That's EXACTLY what I thought when I found his old FS post! All I could say was a big WTF. But thanks a lot!

taking too long to mod since '09June '12 COTM'95 AT200
looks great. keep up the good work. you need those coilovers you ordered! haha.
Welp, Megan Racing pissed me off. After I ordered the coilovers on May 18th, the initial backorder was 3 weeks, so I expected maybe 5 weeks tops. It quickly turned into 11 weeks. And on Thursday, when the truck that the coilovers were supposed to be on finally came in... FINALLY... they unloaded it and coilovers were nowhere to be found. They made a few calls and the workers at the factory forgot to load them. The factory in TAIWAN! Now they said it'll be another 3-4 weeks and I said no. I withdrew my order. Now I'm looking to buy the BC coilovers, but I'll have to wait a little longer until I make the extra money..

On another note, I put a decal on my car today


I know it's gay, but it's just the right amount of rice and I love it! But that's it for decals... I don't wanna look like NASCAR. lol

taking too long to mod since '09June '12 COTM'95 AT200
Wow, sucks about your coilovers...they should of offered you some sort of discount or something to try and compensate.
>
QUOTE (Spider77 @ Aug 7, 2010 - 9:15 AM) *
>Wow, sucks about your coilovers...they should of offered you some sort of discount or something to try and compensate.

Yeah you'd really think so. Over the whole course of those 11 weeks, Megan didn't offer me anything whatsoever. Not even a free coffee mug or something lol.

taking too long to mod since '09June '12 COTM'95 AT200
In all honesty then, if they did nothing to keep you as a customer, then it's probably not worth all that hassle.
>
QUOTE (Spider77 @ Aug 7, 2010 - 9:34 AM) *
>In all honesty then, if they did nothing to keep you as a customer, then it's probably not worth all that hassle.

I just was in it for the coils and how good of a price they were at. But there's just a point that something reaches that you don't care anymore, you're just pissed aha

taking too long to mod since '09June '12 COTM'95 AT200
11 weeks just sucks. forget them.

*1997 Celica ST - 3SGE Greytop BEAMS*1977 Celica RA29 - Classic Cruiser*2005 Matrix AWD - dedded but still hanging around like a ghost2019 Rav4 XLE Premium - Sports mode is fun.
>
QUOTE (cheela @ Aug 7, 2010 - 10:12 AM) *
>11 weeks just sucks. forget them.

I did. Got a full refund! They should've at least given me a free shift knob.. ha

taking too long to mod since '09June '12 COTM'95 AT200
Go BC and never look back! smile.gif

[b]My Build Thread|Flickr|My Blog