and where is the best place to buy parts?
what the first engine/exaust mods should I do? - 6G Celicas Forums
for the first thing, I would just get a short ram intake, or a cold air intake 
you can ebay them for very cheap (no super power gains) but they are cheap, look cool, and give your car a nice sound when revvvving 
you can ebay them for very cheap (no super power gains) but they are cheap, look cool, and give your car a nice sound when revvvving I've spilt my heart into this car :) And I don't ever plan to stop- 6GC for Life ->Semper Fi<1994 Cupra :p 3sgte1995 Celica ST DD1969 Chevelle SSalllll balls. P2 approved!
I love my SRI but I only get the sexy noises at wide open throttle. Get a header from eBay so you can hear the sexy noises all throughout. As for muffler... don't buy anything from Pep Boys, Autozone, etc. Ask some members how they like their mufflers and what kind of tone they have before you make a choice. You don't wanna end up with a rattling bee on crack.
This post has been edited by HectortheRican: Aug 7, 2010 - 8:55 AM
This post has been edited by HectortheRican: Aug 7, 2010 - 8:55 AM
taking too long to mod since '09June '12 COTM'95 AT200
>
how hard is it to install a new header and muffler?
>
ok cool.....I am looking to make the car louder cause its very quiet
QUOTE (HectortheRican @ Aug 7, 2010 - 8:54 AM) 
>I love my SRI but I only get the sexy noises at wide open throttle. Get a header from eBay so you can hear the sexy noises all throughout. As for muffler... don't buy anything from Pep Boys, Autozone, etc. Ask some members how they like their mufflers and what kind of tone they have before you make a choice. You don't wanna end up with a rattling bee on crack.
how hard is it to install a new header and muffler?
>
QUOTE (mgnt232 @ Aug 7, 2010 - 8:49 AM)
>for the first thing, I would just get a short ram intake, or a cold air intake you can ebay them for very cheap (no super power gains) but they are cheap, look cool, and give your car a nice sound when revvvving
you can ebay them for very cheap (no super power gains) but they are cheap, look cool, and give your car a nice sound when revvvving ok cool.....I am looking to make the car louder cause its very quiet
>
I dunno how easy it is to install a header on a GT, since you have to jump through hoops and fire just to put one on an ST. But if there's no need to extend the header, then it should just bolt right one. And muffler.. if you get a catback, it might be easier to just take it to a muffler shop. They'll do it professionally for SUPER cheap.
QUOTE (Speedy_Gonzales @ Aug 7, 2010 - 9:03 AM)
>how hard is it to install a new header and muffler?
I dunno how easy it is to install a header on a GT, since you have to jump through hoops and fire just to put one on an ST. But if there's no need to extend the header, then it should just bolt right one. And muffler.. if you get a catback, it might be easier to just take it to a muffler shop. They'll do it professionally for SUPER cheap.
taking too long to mod since '09June '12 COTM'95 AT200
>
how much hp gains are from cold air intake vs short ram intake?
QUOTE (Speedy_Gonzales @ Aug 7, 2010 - 10:04 AM)
>>
how hard is it to install a new header and muffler?
>
ok cool.....I am looking to make the car louder cause its very quiet
QUOTE (HectortheRican @ Aug 7, 2010 - 8:54 AM)
>I love my SRI but I only get the sexy noises at wide open throttle. Get a header from eBay so you can hear the sexy noises all throughout. As for muffler... don't buy anything from Pep Boys, Autozone, etc. Ask some members how they like their mufflers and what kind of tone they have before you make a choice. You don't wanna end up with a rattling bee on crack.
how hard is it to install a new header and muffler?
>
QUOTE (mgnt232 @ Aug 7, 2010 - 8:49 AM)
>for the first thing, I would just get a short ram intake, or a cold air intake you can ebay them for very cheap (no super power gains) but they are cheap, look cool, and give your car a nice sound when revvvving
you can ebay them for very cheap (no super power gains) but they are cheap, look cool, and give your car a nice sound when revvvving ok cool.....I am looking to make the car louder cause its very quiet
how much hp gains are from cold air intake vs short ram intake?
>
Not much. SRI you're looking at MAYBE 2hp
CAI... 3 maybe 4
Not a lot at all. But it sounds good
This post has been edited by HectortheRican: Aug 7, 2010 - 9:42 AM
QUOTE (Speedy_Gonzales @ Aug 7, 2010 - 9:38 AM)
>how much hp gains are from cold air intake vs short ram intake?
Not much. SRI you're looking at MAYBE 2hp
CAI... 3 maybe 4
Not a lot at all. But it sounds good
This post has been edited by HectortheRican: Aug 7, 2010 - 9:42 AM
taking too long to mod since '09June '12 COTM'95 AT200
>
on ebay the SRI are 25.00 does autozone sell them that cheap?
QUOTE (HectortheRican @ Aug 7, 2010 - 9:42 AM)
>>
Not much. SRI you're looking at MAYBE 2hp
CAI... 3 maybe 4
Not a lot at all. But it sounds good
QUOTE (Speedy_Gonzales @ Aug 7, 2010 - 9:38 AM)
>how much hp gains are from cold air intake vs short ram intake?
Not much. SRI you're looking at MAYBE 2hp
CAI... 3 maybe 4
Not a lot at all. But it sounds good
on ebay the SRI are 25.00 does autozone sell them that cheap?
>
Autozone only has pipes and couplers so you can make one yourself.
This post has been edited by HectortheRican: Aug 7, 2010 - 9:46 AM
QUOTE (Speedy_Gonzales @ Aug 7, 2010 - 9:45 AM)
>on ebay the SRI are 25.00 does autozone sell them that cheap?
Autozone only has pipes and couplers so you can make one yourself.
This post has been edited by HectortheRican: Aug 7, 2010 - 9:46 AM
taking too long to mod since '09June '12 COTM'95 AT200
If your wanting brand name you'll pay alot more (Injen, WeaponR, etc..), as far as the CAI goes, your going to have to put on together yourself, or use the kit from an accord (cant remember the year). There are a metric buttload of posts about CAI's and SRI's...all you have to do is search.
The header for the GT, you can get one from ebay (surewin) and its a pretty easy install. Although by doing so you delete your primary cat and may throw CEL's, and as far as a cat back, your best bet is to go custom, get a resonator and a muffler, then take it to a exhaust shop and have them do the piping. There are threads on all of this, use the search and the stickies.
The header for the GT, you can get one from ebay (surewin) and its a pretty easy install. Although by doing so you delete your primary cat and may throw CEL's, and as far as a cat back, your best bet is to go custom, get a resonator and a muffler, then take it to a exhaust shop and have them do the piping. There are threads on all of this, use the search and the stickies.
>
ok thanks for the info
>
ok thanks.....and have been searching around also....good site here
QUOTE (HectortheRican @ Aug 7, 2010 - 9:46 AM)
>>
Autozone only has pipes and couplers so you can make one yourself.
QUOTE (Speedy_Gonzales @ Aug 7, 2010 - 9:45 AM)
>on ebay the SRI are 25.00 does autozone sell them that cheap?
Autozone only has pipes and couplers so you can make one yourself.
ok thanks for the info
>
QUOTE (Spider77 @ Aug 7, 2010 - 9:51 AM)
>If your wanting brand name you'll pay alot more (Injen, WeaponR, etc..), as far as the CAI goes, your going to have to put on together yourself, or use the kit from an accord (cant remember the year). There are a metric buttload of posts about CAI's and SRI's...all you have to do is search.
The header for the GT, you can get one from ebay (surewin) and its a pretty easy install. Although by doing so you delete your primary cat and may throw CEL's, and as far as a cat back, your best bet is to go custom, get a resonator and a muffler, then take it to a exhaust shop and have them do the piping. There are threads on all of this, use the search and the stickies.
The header for the GT, you can get one from ebay (surewin) and its a pretty easy install. Although by doing so you delete your primary cat and may throw CEL's, and as far as a cat back, your best bet is to go custom, get a resonator and a muffler, then take it to a exhaust shop and have them do the piping. There are threads on all of this, use the search and the stickies.
ok thanks.....and have been searching around also....good site here
x2 on the searching. It's helped me a lot. Good luck man
taking too long to mod since '09June '12 COTM'95 AT200
Search function x123456789. I just covered all of this like two weeks ago.
1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of moneyI'm not really an asshole, but I play one on the internet.**** Photobucket
The intakes are cheapest on ebay, and they well fit, no need to go through a bunch of different angled pieces and couplers, it will all be together already. I bought my CAI off ebay (i extended mine) but its sounds good at any rmp above 1k. As soon as I hit the gas a little you can hear it, and obviously the more you hit on it the louder it gets
And make sure if you are getting a catback that some exhaust shop will bend the piping! no one does it within a 60 mile radius of me! make sure they can first!... I got a magnaflow res and muffler, and its a deep sound but all exhaust systems end up a little raspier, after you add a header. Increasing the flow and eliminating the pre-cat.
And with a header (at least with my ST) as long as you have the first o2 sensor in, the second can just dangle with no CEL, or noticeable difference in driving
ohh...and search
And make sure if you are getting a catback that some exhaust shop will bend the piping! no one does it within a 60 mile radius of me! make sure they can first!... I got a magnaflow res and muffler, and its a deep sound
but all exhaust systems end up a little raspier, after you add a header. Increasing the flow and eliminating the pre-cat.And with a header (at least with my ST) as long as you have the first o2 sensor in, the second can just dangle with no CEL, or noticeable difference in driving
ohh...and search
I've spilt my heart into this car :) And I don't ever plan to stop- 6GC for Life ->Semper Fi<1994 Cupra :p 3sgte1995 Celica ST DD1969 Chevelle SSalllll balls. P2 approved!
>
Bad idea. It could get smashed for whatever reason and that'll throw the CEL since the O2 sensor is actually not reading ANYTHING. Just tell the exhaust shop to cut off the bung from the old manifold, cut a hole in the new header and weld it on. It'll be 20 extra bucks, 30 tops.
QUOTE (mgnt232 @ Aug 7, 2010 - 11:58 AM)
>And with a header (at least with my ST) as long as you have the first o2 sensor in, the second can just dangle with no CEL, or noticeable difference in driving
Bad idea. It could get smashed for whatever reason and that'll throw the CEL since the O2 sensor is actually not reading ANYTHING. Just tell the exhaust shop to cut off the bung from the old manifold, cut a hole in the new header and weld it on. It'll be 20 extra bucks, 30 tops.
taking too long to mod since '09June '12 COTM'95 AT200
i bought one from ebay.. cold air intake, went back to stock, honestly dont even think it was worth the 5 hp shoot maybe if i lost weight itd be faster lmao
Sooner than later I'm gonna order an AEM air bypass valve and get some piping and couplers from Pep Boys and make my own. I'm gonna route it through the hole where the stock resonator was behind the fender.
taking too long to mod since '09June '12 COTM'95 AT200
thast what i did with the cai, wasnt any difference for me...
>
Hmm. I may do it, right now though I have an Injen SRI for a 5SFE... in my 7A lolol. It barely fits because the battery is in the way but s'all good.
QUOTE (zfjohnson07 @ Aug 7, 2010 - 12:18 PM)
>thast what i did with the cai, wasnt any difference for me...
Hmm. I may do it, right now though I have an Injen SRI for a 5SFE... in my 7A lolol. It barely fits because the battery is in the way but s'all good.
taking too long to mod since '09June '12 COTM'95 AT200
a Header takes like 10 minutes to put on.... and a CAI takes like 10 minutes if that... and they honestly dont do anyything but increase sound. I took my CAI off and put back my stock air box. I have a Pacesetter header, and downpipe, goes to a 2.25 straight pipe down to a HKS muffler. It isnt loud but its sounds amazing.
>
QUOTE (HectortheRican @ Aug 7, 2010 - 8:54 AM)
>I love my SRI but I only get the sexy noises at wide open throttle. Get a header from eBay so you can hear the sexy noises all throughout. As for muffler... don't buy anything from Pep Boys, Autozone, etc. Ask some members how they like their mufflers and what kind of tone they have before you make a choice. You don't wanna end up with a rattling bee on crack.
"God created turbo lag to give V8's a chance"
>
Seriously! Here, this is 5mph to 10mph, and the gas pedal is in about 1.5" ...
RRAAAAAAAAARRRRRRRARARARARAARA!!!!!!!!!! *rattle, rattle* *slow down to 3mph for speedbump, not because they're slammed but because their shocks are so blown* *resume acceleration to 15mph* RARARRRRAAAARARARARRRRARAR!!!
Jeez, it's an epidmeic
QUOTE (Nartanian @ Aug 7, 2010 - 2:31 PM)
>>
QUOTE (HectortheRican @ Aug 7, 2010 - 8:54 AM)
>I love my SRI but I only get the sexy noises at wide open throttle. Get a header from eBay so you can hear the sexy noises all throughout. As for muffler... don't buy anything from Pep Boys, Autozone, etc. Ask some members how they like their mufflers and what kind of tone they have before you make a choice. You don't wanna end up with a rattling bee on crack.
Seriously! Here, this is 5mph to 10mph, and the gas pedal is in about 1.5" ...
RRAAAAAAAAARRRRRRRARARARARAARA!!!!!!!!!! *rattle, rattle* *slow down to 3mph for speedbump, not because they're slammed but because their shocks are so blown* *resume acceleration to 15mph* RARARRRRAAAARARARARRRRARAR!!!
Jeez, it's an epidmeic
taking too long to mod since '09June '12 COTM'95 AT200
yeah i guess its where you live as far as what a shop will do. The shops around me said they couldnt weld anything on the headers because they cut out the main cat, which they couldnt touch (because its like illegal or something, but 3 diff shops said it) I ended up just letting it hang, and its been fine for me at least no CEL yet. I did ziptie mine up to a secure location, where the sensor would not be getting knocked into or crushed.
so yeah again go to a shop and see what they can do for you
so yeah again go to a shop and see what they can do for you
I've spilt my heart into this car :) And I don't ever plan to stop- 6GC for Life ->Semper Fi<1994 Cupra :p 3sgte1995 Celica ST DD1969 Chevelle SSalllll balls. P2 approved!