Does anyone have any picutres or a company who ports out the wastegate on the ct20b's?
thank
thank
ct20b wastegate porting? - 6G Celicas Forums
ATS Racing is going to be my best guess..
current project: looking :(
anyone got any pix?
I'm having absolutely NO problems with mine
ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI]PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYOSUSP: Tein/Bilstein/SusTech/INT: SS-III SEATS/Toyota Hyper SportsEXT: WRC/TRD/404QUOTE (lagos @ Aug 25, 2010 - 10:13 AM)Its a safety feature so that people like you don't end up killing themselves or everyone around them.Slow down Paul Walker.6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url]
>
i had some pics in my ct-27 thread years ago, i think they are gone now, but basicly they just grind out the ports to make them larger.
QUOTE (urbandork @ Aug 28, 2010 - 4:07 PM) 
>anyone got any pix?
i had some pics in my ct-27 thread years ago, i think they are gone now, but basicly they just grind out the ports to make them larger.
Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered
>
thats what i thought.... i figure its not like a port/polish on a head where flow rates need to be considered (knowing where take off and some times add material) pretty straight forward.
i didnt have a problem when i was running a 2.5 set up but with my 3 i see boost creep.
ima do the work myself when i get some time.
do i just make the ports bigger OR can i just make it one large oval shape port???
This post has been edited by urbandork: Sep 9, 2010 - 3:52 AM
QUOTE (presure2 @ Sep 7, 2010 - 3:17 PM)
>>
i had some pics in my ct-27 thread years ago, i think they are gone now, but basicly they just grind out the ports to make them larger.
QUOTE (urbandork @ Aug 28, 2010 - 4:07 PM)
>anyone got any pix?
i had some pics in my ct-27 thread years ago, i think they are gone now, but basicly they just grind out the ports to make them larger.
thats what i thought.... i figure its not like a port/polish on a head where flow rates need to be considered (knowing where take off and some times add material) pretty straight forward.
i didnt have a problem when i was running a 2.5 set up but with my 3 i see boost creep.
ima do the work myself when i get some time.
do i just make the ports bigger OR can i just make it one large oval shape port???
This post has been edited by urbandork: Sep 9, 2010 - 3:52 AM
any one got n e pix to share? after looking at some pix of other turbos with wastegates ported i think i just have to enlarge the two holes rather then making it one big hole cus the waste gate seal is only the two holes and not the part in between them right?
This post has been edited by urbandork: Sep 15, 2010 - 3:22 AM
This post has been edited by urbandork: Sep 15, 2010 - 3:22 AM
>
yes.
QUOTE (urbandork @ Sep 15, 2010 - 3:37 AM)
>any one got n e pix to share? after looking at some pix of other turbos with wastegates ported i think i just have to enlarge the two holes rather then making it one big hole cus the waste gate seal is only the two holes and not the part in between them right?
yes.
Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered