Over 1M Posts • 84K Topics • 9K Authors

Home > Topic #75891

Mak5603's Project - 6G Celicas Forums

Topic #75891 319 posts Started by mak5603
chacha
#91
yeah...you don't have too, but it makes the install for the ST much easier...besides struts are easy to be put back. gives a little more room to slide

This post has been edited by chacha: Jan 13, 2011 - 12:19 AM
mak5603
#92
Just gave her a wash in preparation for my projectors which later came. These are the wheels I run in the winter with Michelin Ice 2's. My spoiler is off because I am putting some new bolts in the blocks, I personally don't like the look, maybe if my splitters were on... oh well it won't be off for long. Last shots without projectors, yay!








Here's the JDM hotness, already installed them biggrin.gif Will snap some pics tomorrow probably.

2006 BMW 330i - 6 Speed - Dinan Stage 12014 Toyota Rav4 XLE
sunwukongg
#93
DAMNNN I LOOOOOOVVVVVVVVVVVVVVVVVVVE THE SPOILERLESS LOOK ON YOUR CAR!!! SOOOOOOOOOOOOOOOOO CLEAAAAAAAAAAAN! going to look so much better with the projectors

This post has been edited by sunwukongg: Jan 19, 2011 - 6:01 PM
Mycurse180
#94

Looks pretty clean like that man.

Spoilerless with your red/black rims would look fawkin sick. IMO
mak5603
#95
>
QUOTE (Mycurse180 @ Jan 19, 2011 - 9:19 PM) *
>Looks pretty clean like that man.

Spoilerless with your red/black rims would look fawkin sick. IMO


Thanks guys. Yeah I definitely thought about the whole spoilerless with my other wheel combo, gotta try it as soon as snows officially off the forecast.
2006 BMW 330i - 6 Speed - Dinan Stage 12014 Toyota Rav4 XLE
SupraKid
#96
VERY nice car man thumbsup.gif If i had a hatch id build it just like this!
whatthe
#97
Stock wheels are best smile.gif
[b]My Build Thread|Flickr|My Blog
mak5603
#98
>
QUOTE (SupraKid @ Jan 19, 2011 - 11:32 PM) *
>VERY nice car man thumbsup.gif If i had a hatch id build it just like this!


Thanks man. smile.gif

>
QUOTE (whatthe @ Jan 20, 2011 - 2:35 AM) *
>Stock wheels are best smile.gif


Not bad at all, I wish my 7gc GTS rims were fitted with my winter tires instead, but they're on my Alltrac atm.
2006 BMW 330i - 6 Speed - Dinan Stage 12014 Toyota Rav4 XLE
mak5603
#99
Here's some crappy pics of my projectors, I just wanted to snap SOMETHING... can't wait for better weather.





With the HID's



I'll get some better ones soon.
2006 BMW 330i - 6 Speed - Dinan Stage 12014 Toyota Rav4 XLE
bccentaur3
#100
Do me a favor, since you have HIDs in the projectors. Can you post a pictures of the cut off against a wall??
98 Celica gt red- totaled deer94 Celica st black DD (bad weather beater)- totaled deer95 Celica gt silver- chassis sold88 Celica All-Trac (Burned to a crisp)94 Celica gt white (sold)In need of a rust free chassis!!!!
mak5603
#101
Yeah, I will try to get out and do that tonight.
2006 BMW 330i - 6 Speed - Dinan Stage 12014 Toyota Rav4 XLE
mak5603
#102
Spoiler's back on with all new bolts. smile.gif

I took a cutoff pic, bccentaur, but it sucked because of where I was, lol, I will get a better one tonight.

This post has been edited by mak5603: Jan 21, 2011 - 1:24 PM
2006 BMW 330i - 6 Speed - Dinan Stage 12014 Toyota Rav4 XLE
block
#103
black celicas look so sexy...btw, why is there a gap on your gtfour front? kindasad.gif
mak5603
#104


>
QUOTE (mak5603 @ Sep 13, 2010 - 7:32 PM) *
>I dont have my hood latch extended right now, and I am using the rubber from the stock bumper, so...basically i could put washers under the bolts and not have the gap, but then I would not be able to slide my fingers in the gap to open my hood. Its on my to do list but it works this way until I can weld an extra inch on the hood latch and I don't mind the look.


Doing this soon..
2006 BMW 330i - 6 Speed - Dinan Stage 12014 Toyota Rav4 XLE
bccentaur3
#105
waiting on pictures
98 Celica gt red- totaled deer94 Celica st black DD (bad weather beater)- totaled deer95 Celica gt silver- chassis sold88 Celica All-Trac (Burned to a crisp)94 Celica gt white (sold)In need of a rust free chassis!!!!
block
#106
Oh I see. Didnt quite finish reading at work lol.
mak5603
#107
>
QUOTE (bccentaur3 @ Jan 21, 2011 - 4:03 PM) *
>waiting on pictures


2006 BMW 330i - 6 Speed - Dinan Stage 12014 Toyota Rav4 XLE
bccentaur3
#108
looks like someone didn't mod the projectors yet. The cut-off sucks, but isn't there away to get rid of the halos above the cutoff?
98 Celica gt red- totaled deer94 Celica st black DD (bad weather beater)- totaled deer95 Celica gt silver- chassis sold88 Celica All-Trac (Burned to a crisp)94 Celica gt white (sold)In need of a rust free chassis!!!!
whatthe
#109
Projectors look beautiful. This car reminds me alot about johnnehs
[b]My Build Thread|Flickr|My Blog
sunwukongg
#110
where did you get your spacers from and how have they been holding up?
mak5603
#111
>
QUOTE (bccentaur3 @ Jan 22, 2011 - 2:50 AM) *
>looks like someone didn't mod the projectors yet. The cut-off sucks, but isn't there away to get rid of the halos above the cutoff?


Yeah I just got them like 3 days ago and it's been sub 30 degrees all week, not my ideal working weather.

>
QUOTE (sunwukongg @ Jan 22, 2011 - 11:10 AM) *
>where did you get your spacers from and how have they been holding up?


I got H&R 25mm Spacers, bought them through a local race shop. Been holding up great,never had an issue.


>
QUOTE (whatthe @ Jan 22, 2011 - 5:19 AM) *
>Projectors look beautiful. This car reminds me alot about johnnehs


Thanks man.
2006 BMW 330i - 6 Speed - Dinan Stage 12014 Toyota Rav4 XLE
bccentaur3
#112
No excuses I'm outside working on the celi in 2 degree weather. hahaha
98 Celica gt red- totaled deer94 Celica st black DD (bad weather beater)- totaled deer95 Celica gt silver- chassis sold88 Celica All-Trac (Burned to a crisp)94 Celica gt white (sold)In need of a rust free chassis!!!!
sunwukongg
#113
>
QUOTE (sunwukongg @ Jan 22, 2011 - 11:10 AM) *
>where did you get your spacers from and how have they been holding up?


I got H&R 25mm Spacers, bought them through a local race shop. Been holding up great,never had an issue.

do you knwo where i can find these online? and did you need extended lug nuts?
mak5603
#114
>
QUOTE (bccentaur3 @ Jan 22, 2011 - 1:25 PM) *
>No excuses I'm outside working on the celi in 2 degree weather. hahaha


I never said I don't work on my car in the cold. That would be near impossible in Washington. I did however mention I just got them three days ago, in those three days, all of which I also worked until 8 PM, I only felt like installing the projectors, not modding them yet partially due to the cold, partially due to the fact it is dark, and I just worked 10 hours...not really an excuse...


>
QUOTE (sunwukongg @ Jan 22, 2011 - 11:27 PM) *
>>
QUOTE (sunwukongg @ Jan 22, 2011 - 11:10 AM) *
>where did you get your spacers from and how have they been holding up?


I got H&R 25mm Spacers, bought them through a local race shop. Been holding up great,never had an issue.

do you knwo where i can find these online? and did you need extended lug nuts?


No clue where you can find em online. H&R only sells these ones through vendors and only few vendors carry this size / lug pattern. But they are the ones with extended studs, so bolt the spacer to the existing studs, bolt the wheel to the spacer studs. People can say what they want but I had multiple bearings go out on me BEFORE I got spacers and since I've gotten them my hub area has been good to go. Even if my bearings do go out sooner, it takes like 2 hours including the time to get them pressed to fix it...and its COMPLETELY worth it, sunken in wheels are THE WORST.
2006 BMW 330i - 6 Speed - Dinan Stage 12014 Toyota Rav4 XLE
mak5603
#115
Just sent the the order for my transmission and FWD conversion parts, so the decisions are all made and my setup is set in stone now! I'm super excited!

3rd gen 3sgte, E153 w/ LSD! biggrin.gif I can't wait!
2006 BMW 330i - 6 Speed - Dinan Stage 12014 Toyota Rav4 XLE
mak5603
#117
WOOOO! Looks like I might have finally obtained a GT4 hood latch. Hopefully can finally say goodbye to that damn gap after a year!

This post has been edited by mak5603: Jan 23, 2011 - 1:18 PM
2006 BMW 330i - 6 Speed - Dinan Stage 12014 Toyota Rav4 XLE
mak5603
#118
Welded an inch onto my hood latch last night, NO MORE GAP!

Also purchased some goods from Wolfie smile.gif
2006 BMW 330i - 6 Speed - Dinan Stage 12014 Toyota Rav4 XLE
sunwukongg
#119
i demand pics of gaplessness and clears!
HectortheRican
#120
>
QUOTE (sunwukongg @ Jan 31, 2011 - 5:39 PM) *
>i demand pics of gaplessness and clears!

x2!!
taking too long to mod since '09June '12 COTM'95 AT200
← Back to Topics

Page 4 of 11 (319 total posts)