Over 1M Posts • 84K Topics • 9K Authors

FS: Cruise, Sunroof, Steelies, Etc.... - 6G Celicas Forums

Topic #76274 17 posts Started by Spider77
So, Im sitting on parts still, and to be honest, Im running out of room (and Im moving soon) so I need all the space I can get. Larger items I would prefer local pick up (i'd meet within 30 min of where I live).
So, in with the updated list:
Tweeter Covers ($15 obo), The passenger side is missing the mounting post, sorry.



Visor Clips ($5) Grey


Courtesy Lights ($10) Stock Red


LHD Light Stalk ($10) Was going to use it for my fogs, but went another route. SOLD


Sunroof Control/Dome Light ($10) Grey


Hazard Switch w/pigtail ($10)


Headrests ($25) Still in great shape!


Gorilla Lugs w/Key ($15) Had these on my Konigs, but don't need em anymore.


Exhaust Manifold Gasket w/Downpipe Gasket ($10) Have no need for em, used OEM Gaskets when putting on header.


Chrome Celica License Plate Holder ($35 obo) Kills me, but had to remove it.


15" Steelies w/Covers ($50) All in good condition, no dents no breaks.


Sunroof Housing w/Glass ($75) Dug this one out, been hiding for years!



Crash Bar ($30) Bolt snapped off where passenger fog mounted, can be drilled out.



The cruise is still up for sale, price lowered to $50 OBO. I'm trying to get all this stuff out of here by the end of January. And please excuse Imageshack, I cant figure out how to resize the images once they've loaded.

This post has been edited by Spider77: Dec 23, 2010 - 3:32 PM
i've sent a pm.

This post has been edited by eduardorq: Oct 11, 2010 - 7:53 PM

My Swap project AT200 to ST202 BEAMS
OK, so its cold and I finally had a bit of time to pull the parts.







The actuator comes with the mounting bracket an cover, and pigtail. I know its not pictured (some tech problems with the uploader). This came off my 94 GT, and when it was removed it was in good working order (made sure it operated before I pulled it). Say 75+ shipping/OBO.

This post has been edited by Spider77: Nov 2, 2010 - 11:39 AM
is your car still working, i probably disconnect mine.

Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
>
QUOTE (njccmd2002 @ Nov 9, 2010 - 7:55 PM) *
>is your car still working, i probably disconnect mine.

Yes, but if you want to make it a tad easier, just remove the actuator, and cable. That way its all out of the bay. But yes, no driving problems at all.
that stalk, would it work for a lhd?
>
QUOTE (azn87 @ Dec 20, 2010 - 4:18 PM) *
>that stalk, would it work for a lhd?

Let me take a lookse.....wow, I guess I sold the RHD stuff awhile back. Correction, the stalk pictured is for LHD. I grabbed it up because I was going to wire my fogs up to it. But I went another route.
how hard would wiring up the stalk but have a direct connections for fogs. so basicly i would want to run the fogs with out the lights on
would ship crash bar to 90504? how much is the shipping cost? please let me know thank you.
If I did the math correctly, its going to run about 25 for shipping on the crash bar...
B........U........M..........P
Cant leave feedback yet (dont know why) bump.
does the sun roof motor work? if so how much for i tshipped to fresno, ca 93705?
sold the motor a long time ago. its just the housing, glass, that slide thing, and the switch.
A week before trash bump!