hey guys i just purchased a 94 gt, but it doesnt run. it just cranks and cranks......

the cel is on. i jumped terminal te1 and e1, but the check engine light just keeps flashing fast and it wont give me a code.


i also dont hear the fuel pump pressurizing.

can i jump terminals to supply direct power to the FP to test it? which ones are they??

thanks in advance

it doesn't tell you any codes, it tells you by the amount of flashes and the intervals between the flashes.
i believe there's a sticky on here somewhere about it

This post has been edited by mkernz22: Nov 4, 2010 - 4:30 PM

>



thats the thing, its just blinks at one speed and never stops........ no pauses in between

disregard what I previously posted here....I re-read the original question. my response was not pertinent.

This post has been edited by boosted185: Nov 4, 2010 - 6:14 PM

Jump fp and b+ in the diag box to manually turn on the fuel pump and confirm pressure in the hoses.