yes...near the 4 bolts
True Equal Length Gen3 Turbo Manifold - 6G Celicas Forums
>
the price will be the same as MR2 manifold?!.. if we order the manifold, hw long it will take to shipp it?
QUOTE (chacha @ Nov 21, 2010 - 8:37 PM) 
>This particular kit is being built for an MR2 customer. For a Celica/alltrac/GT4 we would tuck the runners closer to the motor. If you're interested in a setup for your car shoot me a PM/email/phone call and we'll get and order in for you and started on.
the price will be the same as MR2 manifold?!.. if we order the manifold, hw long it will take to shipp it?
so this is also for the ST215 engine? the 4th gen 3sgte?
Wow, this is really good.
Love to get the manifold, can it be made with a T4 turbo footprint??
>
I doubt it, as the 4th gen has a different exhaust manifold bolt pattern than the 3rd and 2nd gens.
That manifold looks incredible!
QUOTE (chacha @ Nov 22, 2010 - 12:34 PM)
>so this is also for the ST215 engine? the 4th gen 3sgte?
I doubt it, as the 4th gen has a different exhaust manifold bolt pattern than the 3rd and 2nd gens.
That manifold looks incredible!
i ask to confirm for the 4th gen because their sites mentioned it for the 4th gen 3sgte.
>
actually, the 3rd and 4th gens share the same flange. (guys use the 3rd gen manifolds on the 4th gen for turbo kits all the time.)
its the 2nd and 3rd gens that have diffrent bolt patterns.
QUOTE (SupraKid @ Nov 27, 2010 - 12:11 AM)
>>
I doubt it, as the 4th gen has a different exhaust manifold bolt pattern than the 3rd and 2nd gens.
That manifold looks incredible!
QUOTE (chacha @ Nov 22, 2010 - 12:34 PM)
>so this is also for the ST215 engine? the 4th gen 3sgte?
I doubt it, as the 4th gen has a different exhaust manifold bolt pattern than the 3rd and 2nd gens.
That manifold looks incredible!
actually, the 3rd and 4th gens share the same flange. (guys use the 3rd gen manifolds on the 4th gen for turbo kits all the time.)
its the 2nd and 3rd gens that have diffrent bolt patterns.
Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered
>
You can email/PM/call us to place an order for the manifold (or full kit including the manifold). We build each one by hand and custom make it to each customer's needs so that we can change/customize it to fit your exact application.
>
The manifold is $750 as shown, and we can build it in any form you'd like for your particular application. Gen1, Gen2, Gen3, Gen4 3SGTE engines. T3, T4, divided T3, divided T4, v-band turbo flanges. 38mm, 44mm, 60mm (or other) wastegate flange. Build time on these is appriximately 4 weeks.
>
The one pictured is on a 3rd Gen 3SGTE. We can build them for any generation 3SGTE. We build each one by hand, so we can customize them to any application to meet each customer's exact needs.
>
Yes, we can make it in a T4 as well as any other turbo footprint.
QUOTE (3WayStunna @ Nov 22, 2010 - 3:33 AM)
>Well thank you for your responeses sir....also, will this kit/manifold be a call to order deal (get them while we are selling them), or something that you will have down the line as far as you can?
You can email/PM/call us to place an order for the manifold (or full kit including the manifold). We build each one by hand and custom make it to each customer's needs so that we can change/customize it to fit your exact application.
>
QUOTE (CeLiCa_ST @ Nov 22, 2010 - 11:11 AM)
>>
the price will be the same as MR2 manifold?!.. if we order the manifold, hw long it will take to shipp it?
QUOTE (chacha @ Nov 21, 2010 - 8:37 PM)
>This particular kit is being built for an MR2 customer. For a Celica/alltrac/GT4 we would tuck the runners closer to the motor. If you're interested in a setup for your car shoot me a PM/email/phone call and we'll get and order in for you and started on.
the price will be the same as MR2 manifold?!.. if we order the manifold, hw long it will take to shipp it?
The manifold is $750 as shown, and we can build it in any form you'd like for your particular application. Gen1, Gen2, Gen3, Gen4 3SGTE engines. T3, T4, divided T3, divided T4, v-band turbo flanges. 38mm, 44mm, 60mm (or other) wastegate flange. Build time on these is appriximately 4 weeks.
>
QUOTE (chacha @ Nov 22, 2010 - 1:34 PM)
>so this is also for the ST215 engine? the 4th gen 3sgte?
The one pictured is on a 3rd Gen 3SGTE. We can build them for any generation 3SGTE. We build each one by hand, so we can customize them to any application to meet each customer's exact needs.
>
QUOTE (jeffrosie @ Nov 26, 2010 - 4:43 PM)
>Wow, this is really good.
Love to get the manifold, can it be made with a T4 turbo footprint??
Love to get the manifold, can it be made with a T4 turbo footprint??
Yes, we can make it in a T4 as well as any other turbo footprint.
EMSPowered Online Store OPEN FOR BUSINESS
>
Good to know, i remember reading somewhere that they weren't and that wasone of the reasons why people were/are detoured away from the swap. Ill try to figure out where i read it.
QUOTE (presure2 @ Nov 27, 2010 - 5:41 AM)
>>
actually, the 3rd and 4th gens share the same flange. (guys use the 3rd gen manifolds on the 4th gen for turbo kits all the time.)
its the 2nd and 3rd gens that have different bolt patterns.
QUOTE (SupraKid @ Nov 27, 2010 - 12:11 AM)
>>
I doubt it, as the 4th gen has a different exhaust manifold bolt pattern than the 3rd and 2nd gens.
That manifold looks incredible!
QUOTE (chacha @ Nov 22, 2010 - 12:34 PM)
>so this is also for the ST215 engine? the 4th gen 3sgte?
I doubt it, as the 4th gen has a different exhaust manifold bolt pattern than the 3rd and 2nd gens.
That manifold looks incredible!
actually, the 3rd and 4th gens share the same flange. (guys use the 3rd gen manifolds on the 4th gen for turbo kits all the time.)
its the 2nd and 3rd gens that have different bolt patterns.
Good to know, i remember reading somewhere that they weren't and that wasone of the reasons why people were/are detoured away from the swap. Ill try to figure out where i read it.
Wow baktasht, this is looking really amazing. Where is the external wastegate located on the manifold??
Looks like I have to make a trip to Texas in the new year to pick up my manifold.
Can you also have then heat coated, as this will be a great bonus.
Interested in doing a manifold and DP for a v6 Celica?
We're semi-local BTW
This post has been edited by DEATH: Jan 1, 2011 - 11:09 PM
We're semi-local BTW
This post has been edited by DEATH: Jan 1, 2011 - 11:09 PM
ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI]PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYOSUSP: Tein/Bilstein/SusTech/INT: SS-III SEATS/Toyota Hyper SportsEXT: WRC/TRD/404QUOTE (lagos @ Aug 25, 2010 - 10:13 AM)Its a safety feature so that people like you don't end up killing themselves or everyone around them.Slow down Paul Walker.6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url]
>
Sure thing, we can do that no problem. Contact me if you're interested in going ahead with it and we'll get you scheduled in.
QUOTE (DEATH @ Jan 1, 2011 - 10:09 PM)
>Interested in doing a manifold and DP for a v6 Celica?
We're semi-local BTW
We're semi-local BTW
Sure thing, we can do that no problem. Contact me if you're interested in going ahead with it and we'll get you scheduled in.
EMSPowered Online Store OPEN FOR BUSINESS
Hi, I heard about this product over on the gt4oc (gt4 owners club) I'm after a decent exhaust manifold, one that won't crack as soon as you start whinding the turbo up, and this looks like just what I'm after! do you know if the hood will clear the manifold on a generation 6 celica GT-Four? (st205) if yes, will you be selling them for 750 USD as stated in the post?
The other problem is, I'm in the Uk, England, would shipping be ok?
Congrats on a great looking product.
Many thanks,
James.
The other problem is, I'm in the Uk, England, would shipping be ok?
Congrats on a great looking product.
Many thanks,
James.
>
Hi James, you've come to the right place for a rock solid manifold that will perform! The $750 introductory price is finished and the manifold is back up to it's normal price as listed on our website. But I can still honor the $750 price for you if you'd like to order in the next couple of weeks. We custom make each manifold, so we can make it to fit your exact application/chassis/hood.
We're located in Austin, Texas. But we ship worldwide. We have a large customer base in the UK, that is no problem at all.
QUOTE (JamesST205 @ Feb 12, 2011 - 6:22 AM)
>Hi, I heard about this product over on the gt4oc (gt4 owners club) I'm after a decent exhaust manifold, one that won't crack as soon as you start whinding the turbo up, and this looks like just what I'm after! do you know if the hood will clear the manifold on a generation 6 celica GT-Four? (st205) if yes, will you be selling them for 750 USD as stated in the post?
The other problem is, I'm in the Uk, England, would shipping be ok?
Congrats on a great looking product.
Many thanks,
James.
The other problem is, I'm in the Uk, England, would shipping be ok?
Congrats on a great looking product.
Many thanks,
James.
Hi James, you've come to the right place for a rock solid manifold that will perform! The $750 introductory price is finished and the manifold is back up to it's normal price as listed on our website. But I can still honor the $750 price for you if you'd like to order in the next couple of weeks. We custom make each manifold, so we can make it to fit your exact application/chassis/hood.
We're located in Austin, Texas. But we ship worldwide. We have a large customer base in the UK, that is no problem at all.
EMSPowered Online Store OPEN FOR BUSINESS