Over 1M Posts • 84K Topics • 9K Authors

foureyedfreek's project - 6G Celicas Forums

Topic #77918 20 posts Started by 4-eyed-freek
this car was one of them junkyard saves, i have put so much time into it and i thought i would show you whats new with it.

removing the wing.. getting ready to put on the gt-four wing raisers


added anti heat wrap to the intake manafold



adding some sound system stuff biggrin.gif





and finally, preping the wing for the gt-four wing raiser that will be here within the week. i will update more pics when it gets here.



hope you enjoyed looking!

This post has been edited by 4-eyed-freek: Mar 30, 2011 - 11:22 AM

It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.Celica: The name is derived from the Spanish word for "heavenly" or "celestial".Back-2-Back July COTM 15&16
any updates on this project? been on for a few days with no updates
well i still havent gotten the gt wing raisers, there on back order so i guess it will be a bit for them but i just got a magnaflow muffler and i am going to do 2.5in pipeing so if i can find someone here in town to do it tomarrow i will take a video and some pics!

thanks for looking, i hope to keep this updated, auto X is pritty soon so there will be alot of pics there fo you all
-skyler

It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.Celica: The name is derived from the Spanish word for "heavenly" or "celestial".Back-2-Back July COTM 15&16
here are some new pics of my attempt at custom door sills( i have new ones so i thought i would try something wit the old ones.)

Project iluminated door sills.
ok first remove the door sill, it pops right off, then i would clean it with some water and soap

< then note the position of the little space between the two plastic pices( you will be able to see wires)
this is where the light(i used an led) will be placed

<next mark the spot on the sill to show where the opening was under it (this is where u will cut out the lettering)

here are the tools i used,+ an exacto knife

it will need a little sanding but it looks ok

with your knife remove the small amount of plastic so the light will be able to shine through.

next i used a flat black spray paint to give it a beter look(keep in mind i never sanded the lettering down yet.


i will update more on how to install the light but as of last night they looked really cool!

This post has been edited by 4-eyed-freek: Jun 22, 2010 - 3:59 PM

It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.Celica: The name is derived from the Spanish word for "heavenly" or "celestial".Back-2-Back July COTM 15&16
well today i got my muffler put on witht the 2 1/12 in pipe. here are some pics, i used the pictures from the 3 inch turbo pipeing forum to show the muffler man what to do lol (under the suspension) i also bought a magnaflow tip for it but i have not put it on yet








hit me up with what you think! pos. or negative

This post has been edited by 4-eyed-freek: Jun 23, 2010 - 3:47 PM

It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.Celica: The name is derived from the Spanish word for "heavenly" or "celestial".Back-2-Back July COTM 15&16
get that tip on and it will be good thumbsup.gif
here are a few pics i took right before a bigs storm today, sorry im not the best at taking pictures kindasad.gif
















It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.Celica: The name is derived from the Spanish word for "heavenly" or "celestial".Back-2-Back July COTM 15&16
heys whats new, at the last autox race i went to i kind of got made fun of because i was running street radials, so i took matters into my own hands and now there will be no laughing anymore! hahaha kindasad.gif

project yokohama( celica 15 in rims and yokohama radial slicks)( they have about 50% left on them, they were raceed before i bought them for 30$ a pice)








It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.Celica: The name is derived from the Spanish word for "heavenly" or "celestial".Back-2-Back July COTM 15&16
are advan and yokohama the same? does anyone know?

It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.Celica: The name is derived from the Spanish word for "heavenly" or "celestial".Back-2-Back July COTM 15&16
I may have to steal your pics and bring them to the shop. The exhaust doesn't hat on anything? or when the car is lifted?
Everywhere around me said that they dont bend pipe to the extreme that the stock is, and they said it would hit if it went under, but that was back when i was 16 so i just believed them lol. hopefully you can tell me differently

I've spilt my heart into this car :) And I don't ever plan to stop- 6GC for Life ->Semper Fi<1994 Cupra :p 3sgte1995 Celica ST DD1969 Chevelle SSalllll balls. P2 approved!
nice rubber! cheap price too
advans are yokos

1995 GT::::Diffusing the Situationエキサイティングカーレーシングチーム!march2010 COTM:6GCfeature2014:january2015-2016-2018 COTM
>
QUOTE (mgnt232 @ Jul 17, 2010 - 6:13 PM) *
>I may have to steal your pics and bring them to the shop. The exhaust doesn't hat on anything? or when the car is lifted?
Everywhere around me said that they dont bend pipe to the extreme that the stock is, and they said it would hit if it went under, but that was back when i was 16 so i just believed them lol. hopefully you can tell me differently


the only place the exhaughst hangs on is the muffler, and i was told it was going to hit the ground by the muffler shop so i brought it to another place and they said it would be fine, i have not had one probleme yet. do not listen to them it will be fine just as long as your car isnt droped so far. im sure it will work.

pm me if you have any questions

thanks! i didnt know if there was anything different from the two names. i hope the shed some time off.



>
QUOTE (Tigawoods @ Jul 17, 2010 - 6:19 PM) *
>nice rubber! cheap price too
advans are yokos


It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.Celica: The name is derived from the Spanish word for "heavenly" or "celestial".Back-2-Back July COTM 15&16
finally got my wing risers on from vincent, what a great product! i will post pics when i get them uploaded.

It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.Celica: The name is derived from the Spanish word for "heavenly" or "celestial".Back-2-Back July COTM 15&16
here are a few bad pics of my new gt four wing. im not very good at taking pics lol.









i will soon take them off and paint them either gloss black or flat black, both with a clear coat.

It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.Celica: The name is derived from the Spanish word for "heavenly" or "celestial".Back-2-Back July COTM 15&16
>
QUOTE (4-eyed-freek @ Jul 16, 2010 - 7:01 PM) *
>heys whats new, at the last autox race i went to i kind of got made fun of because i was running street radials, so i took matters into my own hands and now there will be no laughing anymore! hahaha kindasad.gif

project yokohama( celica 15 in rims and yokohama radial slicks)( they have about 50% left on them, they were raceed before i bought them for 30$ a pice)



Nice tires awesome price, would love to see them in action.
Just a little fyi your tower bar is supposed to be horizontal not vertical it will make a diff. in accel/braking wink.gif. Not to be mean but your not racing with those spring clamps are you?

I am gonna use this pics on my eshop front page, real nice.

Kamikaze eShop 神風 onFacebook
hey thanks! that means alot to me!

It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.Celica: The name is derived from the Spanish word for "heavenly" or "celestial".Back-2-Back July COTM 15&16
your car is SEX!!! I love Silver Celicas!!! The blocks look super clean on your car like it rolled out the factory with them on!
hey thanks, i love the look of silver celicas also i love black ones.

>
QUOTE (hatchy_gt-s @ Jul 19, 2010 - 1:25 PM) *
>>
QUOTE (4-eyed-freek @ Jul 16, 2010 - 7:01 PM) *
>heys whats new, at the last autox race i went to i kind of got made fun of because i was running street radials, so i took matters into my own hands and now there will be no laughing anymore! hahaha kindasad.gif

project yokohama( celica 15 in rims and yokohama radial slicks)( they have about 50% left on them, they were raceed before i bought them for 30$ a pice)



Nice tires awesome price, would love to see them in action.
Just a little fyi your tower bar is supposed to be horizontal not vertical it will make a diff. in accel/braking wink.gif. Not to be mean but your not racing with those spring clamps are you?

yes i am still running with the clamps and i still have not had any problemes, no spring bend or anything. i just inspected them 3 days ago. i hope to get some coilovers when money comes into my life hahaha

It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.Celica: The name is derived from the Spanish word for "heavenly" or "celestial".Back-2-Back July COTM 15&16
so we have some bad news, when putting on my new/old slicks one of them has a small leak thumbsdown.gif so now i only have one, does anyone know where i can get a yokohama a005? or else i will have to get hoosiers, which i really do not want to do.

It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.Celica: The name is derived from the Spanish word for "heavenly" or "celestial".Back-2-Back July COTM 15&16