where do i get intake and inercooler piping? does any body make a kit or do i have to get it custom made? >>

Custom daddy custom. Not too expensive.

hahah not to expensive, lol, $770

can prob find it cheaper but i went with a professinal mandrel bent piping.

check out turboimports.com...they have a Universal GReddy/TRUST intercooler pipe kit. 50mm or 60mm. i believe the 50mm is about 140 bucks, and the 60mm is of course a little more. should be plenty to run all the intercooler piping you could possibly need on a 6th gen. just gotta mess around with it until you find the right way to run it >>.

-John-

I can make you the custom IC piping kit!!! Depending on what options you want with it and how much pipe I have to use on the kit will determine the final cost.
All piping is mandrel bent for best flow and includes couplers (blue, black, or red) and clamps. If you need any reducers they are extra.
I only make the kit in 2.25" and 2.5" size.
To give you an idea...
Approximate Cost: shipping not included
Using aluminized tubing with ceramic coating= about $250
Using stainless tubing with ceramic coating= about $375
Using stainless tubing fully professionally polished= about $500
A deposit of half the final price must be paid to me so I can order materials and make you custom kit. Final payment is due the day I ship the kit to you!
If you have any questions just ask!
Just trying to help everyone out,
DG

Go with aluminum, it'll be WAAAAY lighter and about the same price as stainless.