Fixed: Doors/E-Brake/H Beam Indicators - 6G Celicas Forums

Timmyface

#1

Hey guys.

Just installed new LED's in the cluster, and now my High Beam, Doors Open, Brake indicators in the dash aren't working :S

Everything else is fine, LED's working, Speedo works etc.

Not too sure what fuse it could be if the rest are working... any other ideas?

Thanks.

This post has been edited by Timmyface: May 12, 2011 - 11:06 PM

Timmyface

#2

Bump. Anyone?

mkernz22

#3

reverse the LED's because they won't work if you have them in the wrong way

HectortheRican

#4

>

QUOTE (mkernz22 @ May 11, 2011 - 8:00 PM)

>reverse the LED's because they won't work if you have them in the wrong way

He didn't say that the LEDs didn't work, and even so, that shouldn't hamper the other functions.

taking too long to mod since '09June '12 COTM'95 AT200

Timmyface

#5

Yeah, LED's are working fine, everything else possibly electrical wise is.. besides the little indicator lights in the dash for the doors etc

mkernz22

#6

did you put LED's in those indicators or are they still the stock bulbs?

Timmyface

#7

Still the stock bulbs, and they dont look like they have blown

Batman722

#8

make sure the 3 harnesses are plugged in behind the cluster. One is probably not pushed in tight enough.

my st205 swapandour Beams swap

Timmyface

#9

All plugged in firm and tight. Has me stumped.

eboz74

#10

make sure u didnt tear your instrument panel i did that to my old cluster

Timmyface

#11

I sorted it out >< The backing of my new gauges were covering the holes basically, so i trimmed the back layer and its all good now

Thanks though guys, just another silly situation by me.

Fixed: Doors/E-Brake/H Beam Indicators - 6G Celicas Forums

Contact 6GC Archives