Anyone who has done it?
God made man....Everything else...Made in China
God made man....Everything else...Made in China
Volvo s60 washer jet mod - 6G Celicas Forums
God made man....Everything else...Made in China
part is rare.
im thinking the washer from fj cruiser...
im thinking the washer from fj cruiser...
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
One of the mods I did when I re-sprayed the Celica...nice lower profile jet and finer spray. 
I know member mak5603 has done the Volvo nozzle mod and he loves it. I don't know whether it not if it was from an S60, however. But it is Volvo part # 30655606.
taking too long to mod since '09June '12 COTM'95 AT200
I swapped out the washer nozzle from a new Camry, so I get the mist instead of a stream of fluid. Best mod evar.
KAOS|THE PROGRESSION - SLOW & STEADY|PARTING OUT- it ALL must go!|
I have them. Part number is in my progress thread.
Edit: just saw Hector's post. what he said, I love them.
This post has been edited by mak5603: May 30, 2011 - 12:23 PM
Edit: just saw Hector's post.
what he said, I love them.
This post has been edited by mak5603: May 30, 2011 - 12:23 PM
2006 BMW 330i - 6 Speed - Dinan Stage 12014 Toyota Rav4 XLE
so guys it's perfect fit right?
my left nozzle is acting up and id like to replace it. that write up was on the celica-uk wiki but it couldnt see that anymore.
so the newer camry's nozzles fit too? which is better the camry or the volvo or they are the same?
my left nozzle is acting up and id like to replace it. that write up was on the celica-uk wiki but it couldnt see that anymore.
so the newer camry's nozzles fit too? which is better the camry or the volvo or they are the same?
God made man....Everything else...Made in China
Mine fit perfect.
2006 BMW 330i - 6 Speed - Dinan Stage 12014 Toyota Rav4 XLE
I did it, they fit fine, don't lock into place but are a tight enough fit that it doesnt matter
12.808 @ 100.3mph on stock turbo and ECUCreate>Copy -http://www.stopbuyingrotas.com- Rota's Suck
oh so i goes in but doesnt click or lock and still snug enough to stay there. i will go replace mine with that!
God made man....Everything else...Made in China
So the Camry ones don't lock in or the Volvo ones don't lock in?
I'll try find some newer Toyotas and play around with their windscreen washer then find some Toyota P/N's
I'll try find some newer Toyotas and play around with their windscreen washer then find some Toyota P/N's
Mike W1996 Toyota Celica ST205 GT-FOURGT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC269awhp / 273ft-lbs
>
I have the Volvo ones on the front and the rear and they all click into place nicely like an OEM fit.
QUOTE (delusionz @ Jun 1, 2011 - 10:00 PM) 
>So the Camry ones don't lock in or the Volvo ones don't lock in?
I'll try find some newer Toyotas and play around with their windscreen washer then find some Toyota P/N's
I'll try find some newer Toyotas and play around with their windscreen washer then find some Toyota P/N's
I have the Volvo ones on the front and the rear and they all click into place nicely like an OEM fit.
>
sweet. i didnt know that the it could be done on the rears as well!
QUOTE (CelicaHD2 @ Jun 1, 2011 - 4:16 PM)
>>
I have the Volvo ones on the front and the rear and they all click into place nicely like an OEM fit.
QUOTE (delusionz @ Jun 1, 2011 - 10:00 PM)
>So the Camry ones don't lock in or the Volvo ones don't lock in?
I'll try find some newer Toyotas and play around with their windscreen washer then find some Toyota P/N's
I'll try find some newer Toyotas and play around with their windscreen washer then find some Toyota P/N's
I have the Volvo ones on the front and the rear and they all click into place nicely like an OEM fit.
sweet. i didnt know that the it could be done on the rears as well!
God made man....Everything else...Made in China
It is slightly more fiddly for the rear washer jet as I didn't have too much slack in the rubber tubing, but it fits nicely. 
This post has been edited by CelicaHD2: Jun 2, 2011 - 7:43 AM
This post has been edited by CelicaHD2: Jun 2, 2011 - 7:43 AM
I used to have S60 nozzels on my 6gc before I sold it. It was a cheap mod but was probably one of the better ones I did. I gotta do something similar on my Civic cuz the factory wash jets suck.
put them in a while back and they work just fine.
my st205 swapandour Beams swap
i put camry nozzles a few years ago, pulled em out a couple months ago and put em in my gt4 hood.
Nobody has had problem on putting the oem nozzle on a carbon fiber seibon hood? They dont fit.
What year S60 and can the nozzle be aimed up and down?
2000 Celica GTS 'slowest gts evar'1998 Mazda 626 FS-DE/CD4-E
>
i got some from a 2003 at the junk yard , and no, you cant aimed them. All the volvo serie S have them but they are bigger then the s60. But i dint use non of them , I end up using some from a volvo 850 (1999-2006) .They sit flat and flush on the top and fitted perfectly on the seibon hood without no modification. I will save the others, if you want them,next time we meet.
This post has been edited by CoolZeen: Aug 13, 2020 - 2:00 PM
QUOTE (Bitter @ Jul 15, 2020 - 2:11 PM)
>What year S60 and can the nozzle be aimed up and down?
i got some from a 2003 at the junk yard , and no, you cant aimed them. All the volvo serie S have them but they are bigger then the s60. But i dint use non of them , I end up using some from a volvo 850 (1999-2006) .They sit flat and flush on the top and fitted perfectly on the seibon hood without no modification. I will save the others, if you want them,next time we meet.
This post has been edited by CoolZeen: Aug 13, 2020 - 2:00 PM
Thanks but I don't think they'd work out on a 7th gen, the nozzles are mounted on the cowl so hood mounted nozzles are usually aimed too low if they're fixed position. I've been trying to find something off and on for a few years that'll give a fan spray that's at the right angle. Found some Mazda ones that I'm about to try.
2000 Celica GTS 'slowest gts evar'1998 Mazda 626 FS-DE/CD4-E
THE BEST one to fit on the seibon hood without doing any modification are the volvo 850(99-06),740(90-95),940(90-95) .they fit perfect and they are flat. better looking then the stock ones.