anyone know of some turbo's for the 3s, that will push some good power? i have been looking around but have had no real luck. im looking around the 350-400 hp range, mabey more.
It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.Celica: The name is derived from the Spanish word for "heavenly" or "celestial".Back-2-Back July COTM 15&16
KORacing Street Brawler bolt on kit.
At 400hp, you'll max out the injectors on the 2nd gen 3sgte.
~bloodMoney
well it would be for a 3rd gen so, im not sure what stock injectors will do but im not doing stock.... thats for sure.
It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.Celica: The name is derived from the Spanish word for "heavenly" or "celestial".Back-2-Back July COTM 15&16
if you are going for 350hp a disco potato will work well check out mike's gt four thread...I am going for the 400-500hp EFR 6758....
What I think when you think I care
somewhere around 400, if i go over.. yay! if not, oh well. so i will take a look at his thread, thanks for the info.
It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.Celica: The name is derived from the Spanish word for "heavenly" or "celestial".Back-2-Back July COTM 15&16
Isn't the disco potato kind of a laggy turbo?
'97 ST\ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+[sold 10/18]'93 MX-5LE
For a stock 3s, IMO the t3/t4 46 trim is one of the best turbos you can buy when you are looking for all around performance that is close to OEM spool rates.
And they can hold to the redline.
This post has been edited by bloodMoney: Aug 31, 2011 - 2:33 PM
~bloodMoney
awsome chris, thats right on what im looking for! thankyou guys
It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.Celica: The name is derived from the Spanish word for "heavenly" or "celestial".Back-2-Back July COTM 15&16
