timdog1720

#1

here is a question... I dont have a hard line for the master cylinder I installed for the clutch.. whats can i safely use to run from there to the slave on the transmission ????

---

Always fast and going for the look......

Stambo

#2

your going to need a rubber line or stainless line some where in between the two because of the engine flexing.........

---

2nd Gen 3s-gte.... It lives!97celiman"92-gt-quit making up random acronyms that dont mean anything. the only real acronym is JDM"

Smaay

#3

you shouldn't have to open the system at all. just unbolt the hard line from the transmission and move it out of the way

---

2001 Celica GT-S Turbo1997 Supra TT 6speed1997 Celica 3MZ/1MZ swap1990 Celica All-Trac

bsamps4

#4

you should just buy the hard line from toyota

Batman722

#5

>

QUOTE (bsamps4 @ Sep 26, 2011 - 9:56 PM)

>you should just buy the hard line from toyota

agreed.
perfect fit and probably around $20.

---

my st205 swapandour Beams swap

timdog1720

#6

Okay suggestions ... wich one the hard line part order from gt4 or just the regular celica gt manual???? and also why not just a rubber line made for the brake system and get the fittings for that tranny ...

>

QUOTE (Batman722 @ Sep 26, 2011 - 10:10 PM)

>>

QUOTE (bsamps4 @ Sep 26, 2011 - 9:56 PM)

>you should just buy the hard line from toyota

agreed.
perfect fit and probably around $20.

---

Always fast and going for the look......

Batman722

#7

clutch hard line #31481-20750

the rubber line #90931-01108 (st204)

This post has been edited by Batman722: Sep 26, 2011 - 10:31 PM

---

my st205 swapandour Beams swap

timdog1720

#8

ok but heres the thing i have a mr2 tranny the e153 but off the mr2.. it has the bleeder line, then going to the frame holding the clutch.. then out of the frame is the rubber line going to the second hard line ... how do u get from the rubber hose you told me to buy then to go to the diffrent kind of slave cylinder .....

>

QUOTE (Batman722 @ Sep 26, 2011 - 11:31 PM)

>

clutch hard line #31481-20750

the rubber line #90931-01108 (st204)

---

Always fast and going for the look......

Batman722

#9

I don't understand.

---

my st205 swapandour Beams swap

timdog1720

#10

>

QUOTE (Batman722 @ Sep 27, 2011 - 9:48 AM)

>I don't understand.

---

Always fast and going for the look......

timdog1720

#11

bump

---

Always fast and going for the look......

Culpable04

#12

when I did mine I used my ST205 slave and lines, exactly because I was having issues finding the right hose for the stupid mr2 connection.

you can go to autozone and order a camry V6 manual trans slave and the line from the dealer, or maybe someone has a used one from the ST205 clip / engine set.

Good luck

toyotatech3

#13

trdproven

#14

you can just buy compatible hard lines at Napa and bend them accordingly done deal, done it before. Although OEM is game.

---

94 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi||Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto||Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr804 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy|89 Supra (Sold)90 Supra (Sold)